Scribd
Upload
85 views1 page

Application: R17PR0 LTE1800 Compact Repeater

This document provides information about an R17PR0 LTE1800 compact repeater, including its features, specifications, and block diagram. The repeater supports LTE band 3 and has a maximum gain of over 70dB with automatic and manual gain control. It complies with 3GPP standards for unwanted emissions, spurious emissions, and other performance indicators. The compact design measures 228x167x70mm and has an IP40 rating for indoor use between -10 to 50 degrees Celsius.

Uploaded by

sanjittuku
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
85 views1 page

Application: R17PR0 LTE1800 Compact Repeater

This document provides information about an R17PR0 LTE1800 compact repeater, including its features, specifications, and block diagram. The repeater supports LTE band 3 and has a maximum gain of over 70dB with automatic and manual gain control. It complies with 3GPP standards for unwanted emissions, spurious emissions, and other performance indicators. The compact design measures 228x167x70mm and has an IP40 rating for indoor use between -10 to 50 degrees Celsius.

Uploaded by

sanjittuku
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

R17PR0 LTE1800 Compact Repeater

Application

antenna

R17

cable

Features Block Diagram


Intelligent algorithm to prevent UL interference
Self-control to minimize interference for new rollout e-Node B
Silent mode function
Self-oscillation prevention
Auto setup & optimization
Comprehensive internal LED display
Excellent appearance design
Comply with 3GPP standard

Specifications
R17PR0-LTE1800 Uplink Downlink
Frequency Range 1741 - 1746 MHz 1836 - 1841 MHz
Bandwidth 5 MHz typical
Max. Gain 70 dB
Manual Gain Control 31 dB in step of 1 dB
Automatic Gain Control 20 dB
Gain Flatness 4 dB(p-p)*
Max. Input Power Without Damage 0 dBm
Output Power 18 dBm/total output power 18 dBm/total output power
Out of Band Gain Comply with 3GPP
Operating band unwanted emissions Comply with 3GPP
Spurious Emission Comply with 3GPP
ACRR 20 dBc/30KHz @ 5 MHz&10 MHz
EVM 8%
Frequency Stability 0.01 ppm
Noise Figure 6 dB*
Return Loss -14 dB
Group Delay 4.5 uS
Built-in Serivce Antenna Gain 3 dBi
RF Connector BTS: N-Female; MS: N-Female(for external ant.)
Impedance 50
Power Supply Input: AC 100~240V; Output: DC 9V/5A
Power Consumption 25W
Dimensions 228*167*70 mm
Weight 1.8 kg
IP Rating IP40
Operating Temperature -10~50
Local Control & Monitoring Via LED Control Panel & Via Micro USB
* Noise Figure and Gain Flatness Note: 1dB degradation over the 3MHz bandwidth located at the edges of the
whole system band.
** Technical spec subject to change without notice.

You might also like