Scribd
Upload
102 views

Exercise 2 - Chapter 2

The document provides instructions for students to draw a title block in AutoCAD for a civil engineering drawing assignment. Students are to: (1) Set up the drawing limits and layers in AutoCAD; (2) Include specific information in the title block such as course code, assessment name, student and lecturer names, date, scale, and drawing number; (3) Save and print the title block drawing.

Uploaded by

vino
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
102 views

Exercise 2 - Chapter 2

The document provides instructions for students to draw a title block in AutoCAD for a civil engineering drawing assignment. Students are to: (1) Set up the drawing limits and layers in AutoCAD; (2) Include specific information in the title block such as course code, assessment name, student and lecturer names, date, scale, and drawing number; (3) Save and print the title block drawing.

Uploaded by

vino
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Faculty of Civil and Environmental Engineering Page Number 1 From 1

BFC 10303 ENGINEERING DRAWING AND CAD


Assesment: Exercise 2 Edition 2
Topic: Chapter 2 Drawing Title Block Using Autocad Date September 2017

Instruction :
With using Autocad Software, draw the title block as shown in Figure 1 below. Refer the
instructions for setting up a title block :

a Drawing limits : A4 size paper


Lower Left Corner (0,0) and Upper Right Corner (297,210).
b Layers and colour lines : Black (block template) and Blue (text).
c Dimensions should not be displayed.
d Save as TITLE BLOCK into local disk (D) or pen drive/disked.
e Print colour using A4 paper & submit

1. Faculty Name (E.g. FACULTY OF CIVIL AND


ENVIRONMENTAL ENGINEERING)
2. Course Code and Section No. (E.g. ASSESSMENT CODE :
BFC10303 S1)
3. Assessment Name (E.g. ASSESSMENT NAME : EXERCISE 2)
4. Drawn 1.ByFACULTY OF CIVIL
(E.g. DRAWN BY:ENGINEERING
STUDENTAND ENVIRONMENT
NAME)
2. EXERCISE TOPIC :
5. Checked By (E.g. CHECKED BY: LECTURER NAME)
3. BFC
6. Submission Date1013
(E.g.LUKISAN
DATE:KEJURUTERAAN
1 SEPT 2017)
4. DRAWM
7. Scale (E.g. SCALE:BY1:1) :
8. Drawing5.No:CHECKED BY :
(E.g. STUDENT NICKNAME/ SECTION NO/
6. DATE :
ASSESSMENT NAME/ YEAR) (E.g. NIZA/S1/EX2/2017)
7. SCALE :
8. DRAWING NO :

2 4 6
1 7
3 5 8

Figure 1

You might also like