Scribd
Upload
573 views

InstallationGuide AEBASSetup RD

This document provides instructions for installing and configuring the Aadhaar Enabled Biometric Attendance System (AEBAS) on Windows desktop devices. It outlines the prerequisites, steps to install the RD Service and device drivers, install the AEBAS client application, generate and enter an activation code, select an entry point, and authenticate biometrically to activate the device for attendance marking. Supported biometric devices from various vendors that work with AEBAS are also listed.

Uploaded by

cutepunkk
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
573 views

InstallationGuide AEBASSetup RD

This document provides instructions for installing and configuring the Aadhaar Enabled Biometric Attendance System (AEBAS) on Windows desktop devices. It outlines the prerequisites, steps to install the RD Service and device drivers, install the AEBAS client application, generate and enter an activation code, select an entry point, and authenticate biometrically to activate the device for attendance marking. Supported biometric devices from various vendors that work with AEBAS are also listed.

Uploaded by

cutepunkk
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 12

Aadhaar Enabled Biometric Attendance System (AEBAS)

Installation of RD Service Enabled Setup for Windows-Desktop Devices

Register Device (RD) Services:

UIDAI has introduced RD services in device installations as per latest security guidelines. Only those devices (vendors)
that are registered with UIDAI will be authenticated. To enable this facility, it is required to install RD Service tool and
AEBAS device driver updation tool in the windows system. After successful installation of both services, attendance
marking will be enabled. Present system will be discontinued in due course of time.

To further information - https://uidai.gov.in/images/resource/aadhaar_registered_devices_2_0_09112016.pdf

AEBAS Desktop Devices:

Startek Secugen Mantra


FM220 ACPL HAMSTER PRO 20 MANTRA MFS 100

Morpho Precision IriShield-USB


MSO 1300E2 (SAFRAN) PBABAS300 / PB510 MK 2120U

Pre-Requisites for AEBAS Setup:

1. AEBAS application will run on window 7 and above


2. AEBAS version 2.1.0.1 will support registered devices
3. Microsoft .Net framework 4.0 or higher version is required is your system.
4. Windows administrative privileges are required.
5. Antivirus software, if any, has to be disabled during installation process.
6. Biometric device serial number must be registered at Vendor Management Server (If device serial number is
not registered, please contact to vendor support).
7. Activation code will be required from nodal officer login.
RD Service Installation with Device driver:

1. Uninstall Biometric device driver (if exists).

2. Download the services and read RD installation guide with respect to your device models in below link.

a. MANTRA SOFTECH (Model - MFS100):


http://basreports.attendance.gov.in/downloads/assets/doc/soft/desktop/Drivers/Mantra_MFS100_RD_
services.zip
b. ACCESS COMPUTECH (Model - STARTEK FM220 ACPL):
http://basreports.attendance.gov.in/downloads/assets/doc/soft/desktop/Drivers/StarTek_FM220_RD_s
ervice.zip
c. SECUGEN CORPORATION (Model - HAMSTER PRO 20):
http://basreports.attendance.gov.in/downloads/assets/doc/soft/desktop/Drivers/Secugen_RD_service.
zip
d. IRITECH INC. (IriShield-USB):
http://basreports.attendance.gov.in/downloads/assets/doc/soft/desktop/Drivers/Iritech_RD_service.zip
e. SMART CHIP PRIVATE LIMITED (Model - MORPHO/MSO 1300E2):
https://www.morpho.com/en/biometric-terminals-contact
f. PRECISION BIOMETRIC (Model - PB510):
http://attendance.gov.in/assets/doc/soft/desktop/Drivers/Precision_510_RD_services.zip
g. PRECISION BIOMETRIC (Model - PB ABAS 300):
http://attendance.gov.in/assets/doc/soft/desktop/Drivers/Precision_PBABAS300_RD_service.zip

Installation of AEBAS client application version 2.1.0.1 (latest as on date 22/08/2017):

After successful installation of RD Service, install AEBAS client setup from the below link -
http://basreports.attendance.gov.in/downloads/assets/doc/soft/desktop/AEBAS_SETUP_DESKTOP/Aebas_RD_desktop_
2.1.0.1.zip

Open AEBAS client application 2.1.0.1 setup folder, Double-click on the Setup file.
Click Next button to continue.
Read the License agreement and accept to continue and click Next button to continue.

Click Install button.


Installation process will start.

Click Finish button to complete installation wizard.


Activation code is mandatory to configure device for AEBAS client application:

To generate the activation code login your Attendance portal as a nodal officer.
Note: Office Location, Device Location and Biometric device administrator (Device Admin: who will be authenticating
device at device location) must be defined before generating activation code.

Login as Nodal Officer

Go to Admin Panel >> Manage Device


Manage Device >> Activation Code

Configuration of AEBAS device for attendance marking:


Connect your biometric fingerprint/Iris device to your computer and then double click on the BAS icon on the desktop
or go to start menu >> click BAS to open the AEBAS application.

Application will open and bring the list of domains for selection. Select the domain where your attendance portal is
registered. (Note: If you are not sure of the domain, please get in touch with the nodal officer/technical co-coordinator).
Next window will discover attached device by RD services. Please wait for process completion.

After discovering your device, it will ask for activation code. Enter the device activation code and click submit button.

After activation code verification next window will ask to select Entry Point/Device Location (location where the device
will be installed). Select Entry Point and click Verify button
Then, scan your biometric for authentication. On successful authentication, device will be activated.
Restart the client and you can use for attendance marking. (Please tick the check box button to provide your consent to
mark attendance and click OK button)

If you want to save your consent in particular computer, click Yes button
Enter attendance ID and provide biometric.

You can click on Menu link to latest check updates, announcement, device de-register.
Menu >> Check updates

Menu >> Announcement


Menu >> Device De-Register

Click Helpline button for NIC service desk website and helpline number

You might also like