Scribd
Upload
511 views2 pages

Design of Moment Connection

This document provides design calculations for an extended end plate moment connection with eight bolts. It includes dimensions for the beam and column sections. It then calculates forces including moment, shear, and tension. It checks bolt sizes and capacities. It also includes calculations for weld sizes to connect the beam flange and web to the extended plate. Further calculations determine the required plate thickness and checks for column stiffeners.

Uploaded by

Dushyantha Jayawardena
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
511 views2 pages

Design of Moment Connection

This document provides design calculations for an extended end plate moment connection with eight bolts. It includes dimensions for the beam and column sections. It then calculates forces including moment, shear, and tension. It checks bolt sizes and capacities. It also includes calculations for weld sizes to connect the beam flange and web to the extended plate. Further calculations determine the required plate thickness and checks for column stiffeners.

Uploaded by

Dushyantha Jayawardena
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 2

Extended H. Plate Mom. Conn.

DAR AL-HANDASAH DESIGN OF MOMENT CONNECTION


SHAIR&PARTNERS Extended End Plate Moment Connection - Eight bolts Type
Project Prepared by Dr.Hany El-Rashidy/Eng.Walaa El-Mohandis Computed by
Building Checked by
Subject Approved by

Reference AISC - ASD 9th edition


Section Dimensions Extended En

BEAM H (Total) (cm) t (web) (cm) B (fl.) (cm) t (fl.) (cm)

COLUMN H (Total) (cm) t (web) (cm) B (fl.) (cm) t (fl.) (cm) r(fillet) (cm)

Straining Actions

Moment (m.t) Shear (t.) Tension (t.)

Normal Grade

FY= 2.45 t/cm2

Check No. and Diameter of Bolts:

Ft= M/(d-tf)
= #DIV/0! ton
T/bolt = Ft/6
= #DIV/0! ton
V / total no. = V/16
= 0.00 ton

MAX.TENSION FORCE/BOLT= #DIV/0! ton


MAX.SHEAR FORCE/BOLT= 0.00 ton
db(bolt diameter)= 3.6 cm
USE BOLTS = M36 Grade (10.9) - DIN 6914 - No Torque Tightened Grade (8.8)
F all.ten. (No Torque T.) = 33.50 ton Grade (10.9
F all.ten. (With Torque T) = 35.70 ton
F all.shear = 20.40 ton ###
M16
U.C due to tension = #DIV/0! #DIV/0! M20
U.C due to shear = 0.00 < 1 (safe) M22
M24
Weld Size of Beam Flange to H. Plate: AWS Table 4.1.1

Allowable weld stress M30


Electrode specification= E70XX M36
Tensile strength = 3.48 t/cm2
= .3*nominal tensile strength of weld metal AISC - ASD
= 1.04 t/cm2 Table J2.5
= .4*yield stress of base metal
= 0.98 t/cm2
f all. = 0.98 t/cm2
Sw fillet = Ft/((2*(bf+tf)-tw)*f all.)
= #DIV/0! cm ###
Sw(min.)= #DIV/0! mm #DIV/0!
E70XX
E60XX

369642846.xls - Rev 0 1/2 10/24/2017


Extended H. Plate Mom. Conn.

Weld Size of Beam Web to H. Plate: ###

Sw req. = V/(f all.*(d-2tfb)) = #DIV/0! cm

Sw(min.)= #DIV/0! mm

Calculation of End Plate Thickness:

bp = Max. effective width in design = Bf + 1``


= 2.54 cm
Pf= 0 cm
g= 0 cm
pb=3dp= 10.8
Ma= T*Pf
Ma= #DIV/0! cm.t
Ca = Constant depending on the yield stress of the beam
= 1.13
Cb= (bfb/bp)^0.5
= 0.00
Af/Aw = #DIV/0!
m Ca*Cb*(Af/Aw)^1/3*(Pe/dp)^1/4
C.F= Correction Factor
C.F= SQRT(((g^2+Pf^2 )^0.5)/(5*2.54))
C.F= 1
Required Plate Thickness
tp= ((6*Ma)/(0.75*Fy*bp))^0.5*C.F
= #DIV/0! cm

tp(min.)= #DIV/0! mm

Columns Stiffeners:

1- Check column web yielding


k= 0.00 cm
Pbf= 5/3*flange foce
= #DIV/0! ton
Pbf (allow)= Fyc*twc*(tfb+6K+2tp+2w) AISC - ASD
= #DIV/0! ton #DIV/0! K1 - 1
#DIV/0!

2- Check Column Web Buckling


Pbf (allow)= 4100*twc^3*SQRT(Fy)/dc
= #DIV/0! kips
= #DIV/0! ton #DIV/0! AISC - ASD
#DIV/0! K1 - 8

3- Check Column Flange Bending


bp= tflb+2pf+3.5pb
bp= 37.8 cm

k1= 0.00 cm K1

COLUMN
Pec= (g/2)-k1-(db/4)
= -0.90 cm
Ca= 1.13
Cb= 1 K

Af/Aw= #DIV/0!
m = Ca*Cb*(Af/Aw)^1/3*(Pe/dp)^1/4
= #DIV/0!
Me= m *Ft *Pe/4
= #DIV/0! cm.t.
Required tfc= ((6*Me)/(Fy*bp))^.5
= #DIV/0! cm #DIV/0!
#DIV/0!

369642846.xls - Rev 0 2/2 10/24/2017

You might also like