API 600 TRIM NUMBER CHART

STANDARD TRIM CONFIGURATIONS

The following table details standard trim materials available. Special trims are available upon request.

API Trim Nominal Trim Trim code Stem & Other Trim Disc / Wedge Seat surface Trim Material Grade Service
Parts
Number

For oil and oil vapors and general services with heat treated seats and wedges. General very low erosive
or non-corrosive service between -100C and 320C. This stainless steel material lends itself readily to
1 410 F6 410 (13Cr) (200-275 HBN F6 (13Cr) (200 HBN) 410 (13Cr) (250 HBN min) 13Cr-0.75Ni-1Mn hardening by heat treatment and is excellent for contacting parts such as stems, gates, and discs. Steam,
gas & general service to 370C. Oil & Oil vapor 480C.

2 304 304 304 304 (18Cr-8Ni) 304 (18Cr-8Ni) 19Cr-9.5Ni-2Mn-0.08C For moderate pressure in corrosive, low erosive service between -265C and 450C.

3 310 310 (25Cr-20Ni) 310 (25Cr-20Ni) 310 (25Cr-20Ni) 25Cr-20.5Ni-2Mn For moderate pressure in corrosive or non-corrosive service between -265C and 450C.

4 410 HARD F6H 410 (13Cr) (200-275 HBN) F6 (13Cr) (200-275 HBN) F6 (13Cr) (275 HBN min) 13Cr-0.75Ni-1Mn Seats 275 BHN min. As trim 1 but for medium pressure and more corrosive service.

5 410 FULL HARD FACED F6HF 410 (13Cr) (200-275 HBN) F6+St Gr6 (CoCr Alloy) 410+St Gr6 (CoCr Alloy) (350 HBN 13Cr-0.5Ni-1Mn/Co-Cr-A High pressure slightly erosive and corrosive service between -265C and 650C and higher pressure.
min) Premium trim service to 650C. Excellent for high pressure water and steam service.

5a 410 FULL HARD FACED F6HF 410 (13Cr) (200-275 HBN) (350 HBN min) 410+Hardf. NiCr Alloy (350 HBN min) 13Cr-0.5Ni-1Mn/Co-Cr-A As trim 5 where Co is not allowed.

6 410 and NI Cu F6HFS 410 (13Cr) (200-275 HBN) F6+Hardf. NiCr Alloy (350 HBN Monel 400 (NiCu Alloy) (175 HBN 13Cr-0.5Ni-1Mn/Ni-Cu As trim 1 and more corrosive service.
min) min)

7 410 VERY HARD F6HF+ 410 (13Cr) (200-275 HBN) Monel 400 (NiCu Alloy) (250 HBN F6 (13Cr) (750 HB) 13Cr-0.5Ni-1M0/13Cr-0.5Ni-1Mo Seats 750 BHN min. As trim 1 but for higher pressure and more corrosive/erosive service.
min)

8 410 HARD FACED F6HFS 410 (13Cr) (200-275 HBN) F6 (13Cr) (250 HBN min) 410+St Gr6 (CoCr Alloy) (350 HBN 13Cr-0.75Ni-1Mn/1/2Co-Cr-A Universal trim for general service requiring long service life up to 593C. As trim 5 for moderate pressure
min) and more corrosive service. Steam, gas & general service to 540C. Standard trim for gate valves

8a 410 HARD FACED F6HFS 410 (13Cr) (200-275 HBN) 410 (13Cr) (250 HBN min) 410+Hardf. NiCr Alloy (350 HBN min) 13Cr-0.75Ni-1Mn/1/2Co-Cr-A As trim 5a for moderate pressure and more corrosive service

9 F6 (13Cr) (250 HBN min) Monel 400 (NiCu Alloy) 70Ni-30Cu For corrosive service to 450C such as acids, alkalies, salt solutions, etc. Very corrosive fluids. Erosive-
corrosive service between -240C and 480C. Resistant to sea water, acids, alkalies. Has excellent
MONEL MONEL Monel (NiCu Alloy)
corrosion resistance in chlorine and alkylation service.

10 For superior resistance to corrosion for liquids and gases which are corrosive to 410 stainless steel up to
455C. As trim 2 but a higher level of corrosive service. Provides excellent resistance to corrosive media
316 316 316 (18Cr-Ni-Mo) Monel 400 (NiCu Alloy) 316 (18Cr-Ni-Mo) 18Cr-12Ni-2.5Mo-2Mn at high temperatures and toughness for service at low temperatures. Low temperature service standard
for 316SS valves.

11 MONEL HARD FACED MonelHFS Monel (NiCu Alloy) 316 (18Cr-Ni-Mo) Monel 400+St Gr6 (350HBN min) 70Ni-30Cu/1/2Co-Cr-A As trim 9 but for medium pressure and more corrosive service.

11A MONEL HARD FACED MonelHFS Monel (NiCu Alloy) Monel 400 (NiCu Alloy) Monel 400+HF NiCr Alloy (350 70Ni-30Cu/1/2Co-Cr-A As trim 9 but for medium pressure and more corrosive service.
HBN min)

12 316 HARD FACED 316HFS 316 (Cr-Ni-Mo) Monel 400 (NiCu Alloy) 316+St Gr6 (350 HBN min) 18Cr-12Ni-2.5Mo-2Mn1/2Co-Cr-A As trim 10 but for medium pressure and more corrosive service.

12A 316 HARD FACED 316HFS 316 (Cr-Ni-Mo) 316 (18Cr-8Ni-Mo) 316 Hardf. NiCr Alloy (350 HBN min) 18Cr-12Ni-2.5Mo-2Mn1/2Co-Cr-A As trim 10 but for medium pressure and more corrosive service.

13 ALLOY 20 ALLOY 20 Alloy 20 (19Cr-29Ni) 316 (18Cr-8Ni-Mo) Alloy 20 (19Cr-29Ni) 29Ni-19Cr-2.5Mo-0.07C Very corrosive service. For moderate pressure between -45C and 320C.

14 ALLOY 20 ALLOY 20HFS Alloy 20 (19Cr-29Ni) Alloy 20 (19Cr-29Ni) Alloy 20 St Gr6 (350 HBN min) 29Ni-19Cr-2.5Mo-0.07C/1/2Co-Cr-A As trim 13 but for medium pressure and more corrosive service.
 14a ALLOY 20 - HARD HACED ALLOY 20HFS Alloy 20 (19Cr-29Ni) Alloy 20 (19Cr-29Ni) Alloy 20 Hardf. NiCr Alloy (350 HBN 29Ni-19Cr-2.5Mo-0.07C/1/2Co-Cr-A As trim 13 but for medium pressure and more corrosive service.
min)

15 304 FULL HARD FACED 304 HF 304 (18Cr-8Ni-Mo) 304St Gr6 304+St Gr6 (350 HBN min) 19Cr-9.5Ni-2Mn-0.08C/1/2Co-Cr-A As trim 2 but more erosive service & higher pressure.

16 316 FULL HARD FACED 316 HF 316 HF (18Cr-8Ni-Mo) 316+St Gr6 (320 HBN min) 316+St Gr6 (350 HBN min) 18Cr-12Ni-2.5Mo-2Mn/Co-Cr-Mo As trim 10 but more erosive service & higher pressure.

17 347 FULL HARD FACED 347 HF 347 HF (18Cr-10Ni-Cb) 347+St Gr6 (350 HBN min) 347+St Gr6 (350 HBN min) 18Cr-10Ni-Cb/Co-Cr-A As trim 13 but more corrosive service & higher pressure. Combines good corrosion resistance with high
temperature resistance up to 800C.

18 ALLOY 20 - FULL HARD ALLOY 20 HF Alloy 20 (19Cr-29Ni) Alloy 20+St Gr6 (350 HBN min) Alloy 20+St Gr6 (350 HBN min) 19Cr-29Ni/Co-Cr-A As trim 13 but more corrosive service & higher pressure. Water, gas or low pressure steam to 230C.
FACED

SPECIAL BRONZE BRONZE 410 (CR13) Bronze Bronze Water, oil, gas, or low pressure steam to 232C.

SPECIAL ALLOY 625 ALLOY 625 Alloy 625 Alloy 625 Alloy 625

NACE Specially treated 316 or 410 trim combined optionally with B7M bolts and 2HM nuts to meet NACE MR-01-75 requirements.

Full Full Hard faced trim, suitable for abrasive & severe services up to 1200F (650C).
Stellite

Important Note: Data provided in this chart is for informational purposes only. Always consult current API publications to verify information and trim data. Australian Pipeline Valve recommends that customers engineers analyse service requirements and
specify the materials they consider optimum for their service conditions. Temperatures shown will vary depending on service applications, pressure and media type.
~ Short lead time valve manufacturer ~

If you find this website information useful, tell your plant manager and procurement manager about us!

TRIM MATERIAL EQUIVALENT GRADES

TRIM UNS TYPE Grade (forged) ASTM wrought DIN DIN W N

F6 UNS S41000 13Cr ASTM A182 F6a A4276-410 DIN X12Cr13 1.4006
306 UNS S30400 18-8 Cr-Ni ASTM A182 F304 A276-304 DIN X5CrNi 18 10 1.4301
316 UNS S31600 18-8 Cr-Ni (18-10-2) ASTM A182 F316 A276-316 DIN X5CrNiMo 18 10 1.4401
321 UNS S32100 18 Cr-10 Ni-Ti ASTM A182 F321 A276-321 DIN X6CrNiTi 18 10 1.4541
347 UNS S34700 18 Cr-10 Ni-Cb ASTM A182 F347 A276-347 DIN X6CrNiNb 18 10 1.455
MONEL UNS N04400 67Ni-30Cu ASTM B564-N04400 B164-N04400 DIN 17743 2.436
ALLOY 20 UNS N08020 28Ni-19Cr-Cu-Mo ASTM A182-F20* ASTM B473 DIN 14500 2.466
ALLOY 625 UNS N06625 60Ni-22Cr-9Mo-3.5Cb ASTM B564-N06625 ASTM B564-N06625 DIN 17361 2.4865
C276 UNS N10276 54Ni-15Cr-16Mo ASTM B564-N10276 ASTM B574-N10276 DIN NiMo 16 Cr 15 W 2.4819
17/4PH UNS S17400 0Cr17Ni4Cu4Nb ASTM A4705 UNS S17400 ASTM A4705 UNS S17400 X5CrNiCuNb17-4-4 1.4548
ST. Gr6 UNS R30006 Co Cr-A AMS 5894 Stellite Gr6

For technical references and ASTM/ASME cross reference information on stainless, duplex, chrome-moly and alloy steel used in valves & piping systems in the petrochemical and refining go to our website: WWW.VDMUAE.COM