Scribd
Upload
77 views3 pages

Haidee Concentrating Solar Power

Concentrating solar power plants use mirrors to focus sunlight and drive steam turbines that generate electricity. The heat from concentrating solar power can be stored and used to produce electricity day or night. There are four main types of concentrating solar power technologies: parabolic trough systems, compact linear Fresnel reflectors, power towers, and dish-engine systems. Parabolic troughs use curved mirrors to focus sunlight onto tubes running down mirror troughs to heat fluid for steam generation. Power towers use fields of mirrors to focus sunlight onto a central receiver to heat fluid over 1,000 degrees Fahrenheit to power steam turbines. Dish-engine systems use mirrors fixed to parabolic dishes to heat fluids to around 1,200 degrees F

Uploaded by

Xlash
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
77 views3 pages

Haidee Concentrating Solar Power

Concentrating solar power plants use mirrors to focus sunlight and drive steam turbines that generate electricity. The heat from concentrating solar power can be stored and used to produce electricity day or night. There are four main types of concentrating solar power technologies: parabolic trough systems, compact linear Fresnel reflectors, power towers, and dish-engine systems. Parabolic troughs use curved mirrors to focus sunlight onto tubes running down mirror troughs to heat fluid for steam generation. Power towers use fields of mirrors to focus sunlight onto a central receiver to heat fluid over 1,000 degrees Fahrenheit to power steam turbines. Dish-engine systems use mirrors fixed to parabolic dishes to heat fluids to around 1,200 degrees F

Uploaded by

Xlash
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

Concentrating Solar Power

Concentrating solar power (CSP) plants use mirrors to concentrate the energy from the sun to
drive traditional steam turbines or engines that create electricity. The thermal energy
concentrated in a CSP plant can be stored and used to produce electricity when it is needed, day
or night. Today, over 1,800 megawatts (MW) of CSP plants operate in the United States.
Parabolic Trough

(Photo courtesy of SkyFuel Inc.)


Parabolic trough systems use curved mirrors to focus the suns energy onto a receiver tube that
runs down the center of a trough. In the receiver tube, a high-temperature heat transfer fluid
(such as a synthetic oil) absorbs the suns energy, reaching temperatures of 750F or even higher,
and passes through a heat exchanger to heat water and produce steam. The steam drives a
conventional steam turbine power system to generate electricity. A typical solar collector field
contains hundreds of parallel rows of troughs connected as a series of loops, which are placed on
a north-south axis so the troughs can track the sun from east to west. Individual collector
modules are typically 15-20 feet tall and 300-450 feet long.
Compact Linear Fresnel Reflector

(Photo courtesy of AREVA Solar)


CLFR uses the principles of curved-mirror trough systems, but with long parallel rows of lower-
cost flat mirrors. These modular reflectors focus the sun's energy onto elevated receivers, which
consist of a system of tubes through which water flows. The concentrated sunlight boils the
water, generating high-pressure steam for direct use in power generation and industrial steam
applications.[i]
Power Tower

(Photo courtesy of Sandia National Laboratories)


Power tower systems use a central receiver system, which allows for higher operating
temperatures and thus greater efficiencies. Computer-controlled flat mirrors (called heliostats)
track the sun along two axes and focus solar energy on a receiver at the top of a high tower. The
focused energy is used to heat a transfer fluid (over 1,000 F) to produce steam and run a central
power generator. When using molten salt as a transfer fluid and thermal energy storage medium,
energy storage can be efficently incorporated with these projects, allowing for 24 hour power
generation.
Dish-Engine
(Photo courtesy of Sandia National Laboratories/Randy Montoya)
Mirrors are distributed over a parabolic dish surface to concentrate sunlight on a receiver fixed at
the focal point. In contrast to other CSP technologies that employ steam to create electricity via
a turbine, a dish-engine system uses a working fluid such as hydrogen that is heated up to 1,200
F in the receiver to drive an engine such as the Stirling engine. Each dish rotates along two axes
to track the sun.[i]
vvvvv

You might also like