R 20

Technical
Data.

Electric Forklift Trucks

Models R 20-16 P/R 20-20 P.
R 20 Electric Forklift Trucks.
In accordance with VDI guidelines 2198, this specification applies to the standard model only.
Alternative tyres, mast types, ancillary equipment, etc. could result in different values.

1.1 Manufacturer STILL STILL

1.2 Manufacturers model designation R 20 -16 P R 20 -20 P
Characteristics

1.3 Power supply electric, diesel, petrol, gas, mains electric electric electric
1.4 Type of control hand, pedestrian, stand-on, rider seated rider seated rider seated
1.5 Carrying capacity/load Q (kg) 1600 2000
1.6 Load centre c (mm) 500 500
1.8 Load distance x (mm) 355 365
1.9 Wheelbase y (mm) 1425 1530
2.1 Weight kg 2905 3120
2.2 Axle loadings laden front kg 3970 4580
Weight

2.2.1 Axle loadings laden rear kg 535 490

2.3 Axle loadings unladen front kg 1380 1540
2.3.1 Axle loadings unladen rear kg 1525 1580
3.1 Tyres rubber (V), superelastic (SE), pneumatic (L), polyurethane (PE) SE/L SE
Wheels, tyres

3.2 Tyre size front 18 x 7 - 8 (16 PR) 200 / 50 - 10

3.3 Tyre size rear 16 x 6 - 8 (14 PR) 16 x 6 - 8
3.5 Wheels number front (x = drive wheel) 2x 2x
3.5.1 Wheels number rear (x = drive wheel) 2 2
3.6 Track width front b10 (mm) 932 942
3.7 Track width rear b11 (mm) 865 865
4.1 Tilt angle, mast/fork carriage forwards degrees 3 3
4.1.1 Tilt angle, mast/fork carriage backwards degrees 7 7
4.2 Closed height h1 (mm) 2260 2260
4.3 Free lift h 2 (mm) 150 150
4.4 Lift height h 3 (mm) 3430 3350
4.5 Height, mast raised h 4 (mm) 4080 4000
4.7 Height to top of overhead guard (cabin) h 6 (mm) 1960 1960
4.8 Seat height h 7 (mm) 892 892
4.12 Coupling height h 10 (mm) 460 460
4.19 Overall length l1 (mm) 2825 2940
Dimensions

4.20 Length to front face of forks l2 (mm) 2025 2140

4.21 Overall width b 1 (mm) 1080 / 1115 1148
4.22 Fork thickness s (mm) 40 40
4.22.1 Fork width e (mm) 80 80
4.22.2 Fork length l (mm) 800 800
4.23 Fork carriage to DIN 15173 class / form A or B ISO II B ISO II B
4.24 Fork carriage width b 3 (mm) 980 1040
4.31 Ground clearance beneath mast, laden m1 (mm) 91 100
4.32 Ground clearance at centre of wheelbase m 2 (mm) 110 110
4.33 Aisle width for pallets 1000 x 1200 wide A st (mm) 3400 3507
4.34 Aisle width for pallets 800 x 1200 long A st (mm) 3595 3702
4.35 Outer turning radius Wa (mm) 1839 1936
4.36 Inner turning radius b13 (mm)
5.1 Speed laden km / h 14 14
5.1.1 Speed unladen km / h 16 16
5.2 Lift speed laden m /s 0.42 0.38
5.2.1 Lift speed unladen m /s 0.6 0.6
5.3 Lowering speed laden m /s 0.6 0.6
5.3.1 Lowering speed unladen m /s 0.47 0.47
5.5 Rated drawbar pull laden N 2700 1870
Performance

5.5.1 Rated drawbar pull unladen N 2700 2120

5.6 Max. drawbar pull laden N 7550 7480
5.6.1 Max. drawbar pull unladen N 7700 7630
5.7 Gradeability laden % 6 3.6
5.7.1 Gradeability unladen % 10 7.1
5.8 Max. gradeability laden % 17 14.3
5.8.1 Max. gradeability unladen % 28 24.5
5.9 Acceleration time laden s 4.8 5
5.9.1 Acceleration time unladen s 4.1 4.3
5.10 Brakes mech. mech.
6.1 Drive motor hourly capacity kW 2x4 2x4
6.2 Hoist motor capacity at 15% duty factor kW 9 9
6.3 Battery equipment to DIN 43531/35/36 A, B, C, no DIN 43531 A DIN 43531 A
Motors

6.4 Battery voltage U (V) 48 48

6.4.1 Battery capacity K 5 (Ah) 575 (500 625) 690 (600750)
6.5 Battery weight kg 856 1013
6.6 Energy consumption according to VDI cycle kWh / h
8.1 Drive control Stilltronic-Impuls Stilltronic-Impuls
8.2 Operating pressure for attachments bar 170 170
Other

8.3 Oil flow for attachments l / min.

8.4 Average noise peak at operators ears dB (A)
8.5 Trailer coupling, type/DIN pin pin
 a b
h4

68 Adjustable
mm seat
h3

75 mm

h1
h6
l
h5

Q c

h7
h10
h2

m1 m2
x y
l2
l1
e
fork spacing
adjustable

b11
b3
b1

b10

Gradient performance (dry, concrete surface =

coefficient of friction 0.8, battery 600 A / h)
R 20-16 P R 20-20 P
unladen 20% 800 m 730 m
W 15% once 1660 m 1400 m
a per
10% hour 4600 m 3300 m
5% 16075 m 13000 m

Example (with 2000 kg load): 9 % gradient, 10 m

distance. This gradient is negotiable 128 times per hour.
laden R 20-16 P R 20-20 P
12% once 680 m 680 m
9% per 1450 m 1280 m
5% hour 5550 m 4050 m
3% 13285 m 9450 m

Mast types.
Telescopic Full free lift Triple
from to from to from to from to from to
Lift height h3 mm 2630 - 3530 3630 - 5430 2775 - 3575 3675 - 4075 4020 - 8020
Closed mast height h1 mm 1860 - 2310 2360 - 3260 1860 - 2260 2310 - 2510 1860 - 3260
R 20-16 P

Raised mast height h4 mm 3280 - 4180 4280 - 6080 3425 - 4225 4325 - 4725 4670 - 8670
Free lift h2 / h5 mm 150 1230 - 1630 1680 - 1880 1230 - 2630
Angle of tilt
 >( 3 7 3 9 3 7 3 9 3 5
Length l2 mm 2025 2025 2045
Lost load centre x mm 355 355 375
Working aisle width
Pallets 1000 x 1200 wide 800 x 1200 long A st mm 3400 3595 3400 3595 3420 3615

Lift height h3 mm 2550 - 3350 3450 - 5350 2670 - 3570 3670 - 4370 3865 - 8065
Closed mast height h1 mm 1860 - 2260 2310 - 3260 1860 - 2310 2360 - 2710 1860 - 3260
Raised mast height h4 mm 3200 - 4000 4100 - 6000 3320- 4220 4320 - 5020 4530 - 8730
R 20-20 P

Free lift h2 / h5 mm 150 1230 - 1680 1730 - 2080 1230 - 2630

Angle of tilt
 >( 3 7 3 9 3 7 3 9 3 5
Length l2 mm 2140 2140 2162
Lost load centre x mm 365 365 387
Working aisle width
Pallets 1000 x 1200 wide 800 x 1200 long A st mm 3507 3702 3507 3702 3528 3724

The models depicted in this brochure may contain special parts or attachments which are not supplied as standard.
 Capacity Chart R 20-16 P Capacity Chart R 20-16 P
Tele HiLo mast with triple mast
load centre c = 500 mm
load centre c = 500 mm 1600
1600 load centre c = 600 mm
1430
1500 Q 1400
load centre c = 600 mm
1430
1400 1200 load centre c = 800 mm
1180
Q load centre c = 1000 mm
1010
1300
1000

capacity in kg
1200 load centre c = 800 mm
1180
800
Q
1100
capacity in kg

1010
load centre c = 1000 mm 600
1000 Q
C

900 400
1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0
C
800 rated lift in m
0.5 1.0 1,5 2.0 2.5 3.0 3.5 4.0 4.5
rated lift in m

Capacity Chart R 20-20 P

with triple mast
Capacity Chart R 20-20 P 2100
with telescopic and full free lift mast 2000
2100 load centre
1900 c = 500 mm
2000
Q 1800
1900 load centre c = 500 mm
1700 c = 600 mm
Q 1800 1600
1700 load centre c = 600 mm 1500
1600
1400 c = 800 mm
capacity in kg

1500
load centre c = 800 mm 1300
1400
capacity in kg

1200
1300 Q
Q
1100
1200
1000
1100
900 C
1000 C
800
900 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0
1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0
rated lift in m
rated lift in m

up to closed height of 2190 mm

Tele up to 2240 mm over closed height of 2240 mm
Tele/full free lift from 2290 mm
Technical Data
Electric Forklift Trucks
Models R 20 -16 P/R 20-20 P.

n Dual motor front wheel drive. sed profiles. Hydraulic hoses for attach- Stability is achieved by virtue of the high
ments are run in the dead visibility area of position of the steer axle articulation point.
With a 48 volt battery and dual motor front
the mast sections with no hose reels This means that the centrifugal force has
wheel drive, the R 20 is a high performance
for wear-free operation. less effect because of the short length of
machine.
its lever arm from the tipping line.
Two heavy duty drive motors provide
powerful traction, particularly on steep n Drivers compartment.
slopes. l The cockpit has an LCD display and a
facility for the driver to select from a range
The tractive power of the drive motors is of pre-set drive performance levels. He can
precisely matched to the movement of the select the most suitable acceleration or
steering i.e. at full steering lock both drive braking and travel speeds from 5 pre-set
motors turn the truck actively into the options. Further adjustments of the
corner. This makes for sensitive operation drive parameters to suit the application
in narrow aisles and gives better conditions can be made by simply altering
manoeuvrability. the software.
l Speed and torque can be regulated l The drive pedal* sets the travel speed
independently of each other, allowing required by the driver, which is unaffected
sensitive driving, powerful acceleration and by either load or road surface.
wear free electrical braking using only the
drive pedal. l The up-to-date driving characteristics
of the R 20 allow the truck to be held on a
l High efficiency regenerative braking gradient or on uneven roadways without
(energy recovery of up to 10 % is possible).
n Steering.
the use of hand or foot brakes.
When plugging or braking, or if the drive l The steering operates on the hydrostatic
pedal is released, energy flows back into principle with a priority valve. l Roomy footwell with inclined floor plate

the battery to give the R 20 a greater and non-slip rubber matting.

l The pump operates on demand i.e.
working range from one battery charge. It l Automotive style hand brake to the right
only when the steering wheel is moved
is often possible to use a smaller battery.
for optimal energy economy. of the drivers seat.

l With its articulating steer axle, the R 20

n Electrics. is suitable for use on uneven roads. As a
The digital electrical system allows simple genuine 4 wheel truck it absorbs road
adaptation to altered operating conditions. shocks particularly well.
The exchange of information between
electrical assemblies, e.g. between the
drive controller and the cockpit, is achieved
n Hydraulics.
using the CAN bus system (Controller Area
l Pump motor speed precisely follows
Network) already used successfully in other valve lever position to match demand
types of vehicle. The number of cables and exactly, thereby conserving energy to give
plug connectors is reduced in comparison longer operation from a battery charge.
to the previous system and thus reliability Working safety is increased due to precision
is increased. In addition, it is easy to hoisting.
l Low step gives convenient entry and exit
implement variants to the electrical l The oil is filtered through a suction to the spacious footwell. Inclined floor plate
equipment. filter before going to the hydraulic units, helps reduce leg fatigue.
reducing wear to a minimum.
l Comfortable, hydraulically damped seat
R 20-16 P/20 P e 1.5 3/04 td Subject to technical modifications.

n Mast. adjusts to the drivers weight. Generous

STILL clear view masts in telescopic, HiLo
n Stability. squab length gives added support to the
and triplex designs for every application: High levels of stability mean that the R 20 thighs and reduces fatigue.
can traverse corners at relatively high
l Telescopic: l Adjustable steering column plus reach
speeds in safety. This contributes to
the mast suitable for most applications. greater throughput. and rake adjustment for the seat provide
Economical mast design. an extremely comfortable working position
for any physique.
l HiLo:
for high stacking under low ceilings. Utilises
the space right up to the roof.
n Service.
The servicing interval is doubled from
l Triplex:
the previous 500 operating hours up to
for applications with low doorways and 1000. This has been made possible by
greater stacking heights. Utilises the space improvements in quality and by reducing
right up to the roof. the number of components which require
l Fork carriage maintenance.
The fork carriage, completely redesigned
for this truck, gives a clear view onto the * Available with dual pedal control on
load being picked up thanks to its optimi- request.

STILL GmbH International Division P.O.B. 74 07 20 D-22097 Hamburg Telephone +49 40 73 39 -0 Telefax +49 40 73 39-16 03 www.still.de