RSLinx Classic

GETTING RESULTS GUIDE

PUBLICATION LINX-GR001I-EN-ENovember 2011
Supersedes Publication LINX-GR001H-EN-E
 Contact Rockwell Customer Support Telephone 1.440.646.3434
Online Support http://www.rockwellautomation.com/support/

Copyright Notice 2011 Rockwell Automation Technologies, Inc. All rights reserved. Printed in USA.
This document and any accompanying Rockwell Software products are copyrighted by Rockwell Automation
Technologies, Inc. Any reproduction and/or distribution without prior written consent from Rockwell Automation
Technologies, Inc. is strictly prohibited. Please refer to the license agreement for details.
Trademark Notices Allen-Bradley, ControlLogix, FactoryTalk, PLC-5, Rockwell Automation, Rockwell Software, RSLinx, RSView, the
Rockwell Software logo, and VersaView are registered trademarks of Rockwell Automation, Inc.

The following logos and products are trademarks of Rockwell Automation, Inc.:
RSBizWare, the RSBizWare logo, RSBizWare Batch, FactoryTalk Batch, RSLogix, Logix5000, RSOPC Gateway,
FactoryTalk Gateway, Data Highway Plus, DH+, RSView, FactoryTalk View, RSView Studio, FactoryTalk View
Studio, PanelView, RSView Machine Edition, RSView ME Station, RSView32, FactoryTalk Activation, FactoryTalk
Administration Console, FactoryTalk Alarms and Events, FactoryTalk Automation Platform, FactoryTalk Services
Platform, FactoryTalk Diagnostics, FactoryTalk Directory, FactoryTalk Live Data, RSAssetSecurity, FactoryTalk
Security, RSSql, FactoryTalk Transaction Manager, GuardLogix, GuardPLC, MicroLogix, PanelView, RSLinx Classic,
RSLinx Enterprise, RSNetWorx, RSNetWorx for ControlNet, RSNetWorx for DeviceNet, SLC 5, SLC 500,
Powermonitor, Powermonitor 1000, and Powermonitor 3000.

Other Trademarks Microsoft, Windows, Windows ME, Windows NT, Windows 2000, Windows Server 2003, and Windows XP are either
registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
Adobe, Acrobat, and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the
United States and/or other countries.
ControlNet is a registered trademark of ControlNet International.
DeviceNet is a trademark of the Open DeviceNet Vendor Association, Inc. (ODVA).
Ethernet is a registered trademark of Digital Equipment Corporation, Intel, and Xerox Corporation.
OLE for Process Control (OPC) is a registered trademark of the OPC Foundation.
All other trademarks are the property of their respective holders and are hereby acknowledged.

Warranty This product is warranted in accordance with the product license. The products performance may be affected by system
configuration, the application being performed, operator control, maintenance, and other related factors. Rockwell
Automation is not responsible for these intervening factors. The instructions in this document do not cover all the
details or variations in the equipment, procedure, or process described, nor do they provide directions for meeting every
possible contingency during installation, operation, or maintenance. This products implementation may vary among
users.
This document is current as of the time of release of the product; however, the accompanying software may have
changed since the release. Rockwell Automation, Inc. reserves the right to change any information contained in this
document or the software at anytime without prior notice. It is your responsibility to obtain the most current information
available from Rockwell when installing or using this product.

Version: 2.59.00 (CPR 9 Service Release 5)

Modified: October 18, 2011

ii
Contents

Introduction 1
Purpose of the document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Intended audience. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
How does the getting results guide fit in with other Rockwell Software product docu-
mentation? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Online help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Document conventions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Feedback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

1 Welcome to RSLinx Classic 3

What is RSLinx Classic? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Differences between RSLinx Classic types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
RSLinx Classic Lite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
RSLinx Classic Single Node . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
RSLinx Classic OEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
RSLinx Classic Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Quick start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Step 1 Configure a driver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Step 2 Configure a topic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Step 3 Copy a link to the clipboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Step 4 Paste a link from the clipboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Exploring RSLinx Classic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Title bar. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Menu bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Toolbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Application workspace . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Status bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

2 Installing and Starting RSLinx Classic 15

Before you begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
System requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Hardware requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Software requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Installing RSLinx Classic software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Updating an existing installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Starting RSLinx Classic software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

RSLINX CLASSIC GETTING RESULTS GUIDE

Troubleshooting installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

3 RSWho 19
Using RSWho. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
RSWho browsing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

4 OPC and DDE Connectivity 21

OLE for Process Control (OPC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Dynamic Data Exchange (DDE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
DDE/OPC client connectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

5 Finding the Information You Need 23

Using the online help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Accessing help for a control or field . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Finding step-by-step procedures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Finding definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Accessing online guides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Training . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Technical support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
When you call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

A Activation 29
Grace period . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Activate RSLinx Classic with FactoryTalk Activation . . . . . . . . . . . . . . . . . . . . . . . . 29
How to activate RSLinx Classic. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Finding more information about FactoryTalk Activation . . . . . . . . . . . . . . . . . . 30

B Secure RSLinx Classic with FactoryTalk Security 31

How do I set up security in RSLinx Classic?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
What can I secure in RSLinx Classic? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Considerations when using RSLinx Classic with FactoryTalk Security . . . . . . . . . . . 38
Network/Local Directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Reset Network Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Miscellaneous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Glossary 41

Index 43

vi
Introduction

0 Placeholder
Purpose of the document
The Getting Results with RSLinx Classic guide provides you with information on how
to install and navigate the RSLinx Classic software. It explains how to access and
navigate the online help, and how to effectively use the RSLinx Classic software.

Intended audience
We assume that you are familiar with:
IBM-compliant personal computers
Microsoft Windows operating systems
OLE for Process Control (OPC) communication
Microsoft dynamic data exchange (DDE) messaging
Allen-Bradley programmable logic controllers (PLC)
Rockwell Softwares PLC programming tools

How does the getting results guide fit in with other Rockwell
Software product documentation?
This getting results guide can be considered the entry point into Rockwell Softwares
documentation set for this product. The documentation set contains pertinent, easily
accessible product information and ships with the software product. This set ships with
the software product, and is designed to free you from tedious paper shuffling and reduce
information overload.
Other components of the documentation set include electronic release notes and online
help.

Online help
The online help includes all overview, procedural, screen, and reference information for
the product. The help contains these basic components: overview topics, quick start
topics, step-by-step procedures, and screen element descriptions (for example, text boxes,
drop-down lists, and option buttons). All of the help is context-sensitive with the
application and provides you with immediate access to application tasks and screen
element descriptions. Refer to the Finding the information you need chapter in this
guide for a more detailed description of the online help.

RSLINX CLASSIC GETTING RESULTS GUIDE

This getting results guide, as well as any reference guides, are included in a portable document
format (PDF) on your RSLinx Classic CD. These files must be viewed using the Adobe Acrobat
Reader software, which you can download for free from the Adobe website (www.adobe.com).

Document conventions
The conventions used throughout this document for the user interface comply with those
recommended by Microsoft. If you are not familiar with the Microsoft Windows user
interface, we recommend that you read the documentation supplied with the operating
system you are using before attempting to use this software.

Feedback
Please use the feedback form packaged with your software to report errors or let us know
what information you would like to see added in future editions of this document. You can
also send an email message to [email protected] with any comments about
Rockwells products and services.

2
1 Welcome to RSLinx Classic

1 Placeholder
This chapter includes the following information:
What is RSLinx Classic?
Differences between RSLinx Classic types
Quick start
Exploring RSLinx Classic

What is RSLinx Classic?

RSLinx Classic for Rockwell Automation Networks and Devices is a comprehensive
factory communications solution for use with the following operating systems:
Microsoft Windows XP Professional, XP SP1, XP SP2, or XP SP3 [32-bit]
Microsoft Windows Server 2003, SP1, SP2, R2, or R2 SP2 [32-bit], or Microsoft
Windows Server 2003 R2 Standard SP2 [64-bit]
Microsoft Windows Server 2008, SP1, SP2, R2, or R2 SP2 [32-bit], or Microsoft
Windows Server 2008 Standard SP2, R2 SP1 [64-bit ]
Microsoft Windows Vista Business SP1, SP2 [32-bit] or Microsoft Windows Vista
Home Basic SP1, SP2 [32-bit]
Microsoft Windows Vista Home Premium (N) SP1, SP2 [32-bit ]or Microsoft
Windows Vista Home Premium (N) SP1, SP2 [64-bit]
Microsoft Window 7 Professional, SP1 [32-bit] or Microsoft Windows 7 Professional,
SP1 [64-bit]
Microsoft Window 7 Home Premium [32-bit] or Microsoft Windows 7 Home
Premium [64-bit]

RSLinx Classic provides Allen-Bradley programmable controller access to a wide variety

of Rockwell Software and Allen-Bradley applications. These range from device
programming and configuration applications such as RSLogix and RSNetWorx, to HMI
(Human-Machine Interface) applications such as RSView32, FactoryTalk View SE, and
FactoryTalk View ME Station, to your own data acquisition applications using Microsoft
Office, web pages, or Visual Basic. RSLinx Classic also incorporates advanced data
optimization techniques and contains a set of diagnostics. The Application Programming
Interface (API) supports custom applications developed with the RSLinx Classic SDK.
RSLinx Classic is an OPC Data Access Compliant Server and a DDE server.

Differences between RSLinx Classic types

RSLinx Classic is available in five versions to meet the demand for a variety of cost and
functionality requirements. Depending on the version you are running, some functionality

RSLINX CLASSIC GETTING RESULTS GUIDE

may or may not be operational. Refer to the following sections for specific version
functionality.
The RSLinx Classic version you are running appears in the title bar at the top of the main
window. If a version of RSLinx Classic is started without the proper activation files, it
runs as RSLinx Classic Lite.

RSLinx Classic Lite

RSLinx Classic Lite provides the minimum functionality required to support RSLogix and
RSNetWorx. This version is not commercially available, but is bundled with products that
require only direct access to the RSLinx Classic network drivers. This version does not
support OPC, DDE, or the published RSLinx Classic C Application Programming
Interface (API).
RSLinx Classic Lite is used for the following:
Ladder logic programming using RSLogix products.
Network and device configuration and diagnostics using RSNetWorx.
Configuring Ethernet modules/devices (for example, 1756-ENET, 1756-DHRIO, and
so on).
Upgrading firmware using ControlFlash.
Browsing networks and getting device information such as firmware revision.

RSLinx Classic Single Node

RSLinx Classic Single Node includes the required functionality to supply
communications services for all Rockwell Software products. OPC and DDE interfaces
are supported, but to only one device. It does not support applications developed for the
RSLinx Classic C Application Programming Interface (API) or direct drivers in HMI
applications. RSLinx Classic OEM or higher is required for these application types.
RSLinx Classic Single Node is used for the following:
Data acquisition using OPC or DDE to only one device. This includes clients such as
RSView32, FactoryTalk View SE, FactoryTalk View ME Station, Microsoft Office,
Visual Basic, and web pages.
Ladder logic programming using RSLogix products.
Network and device configuration and diagnostics using RSNetWorx.
Configuring Ethernet modules/devices (for example, 1756-ENET, 1756-DHRIO, and
so on).
Upgrading firmware using ControlFlash.
Browsing networks and getting device information such as firmware revision.

4

1 WELCOME TO RSLINX CLASSIC

RSLinx Classic OEM

1 Placeholder
RSLinx Classic OEM includes the required functionality to supply communications
services for all Rockwell Software products. OPC and DDE clients are supported for any
number of devices. It also supports applications developed for the RSLinx Classic C
Application Programming Interface (API).
RSLinx OEM version 2.2 and previous versions only supported AdvanceDDE. RSLinx
Version 2.3 and subsequent versions support all DDE types except FastDDE.
RSLinx Classic OEM is used for the following:
Data acquisition using OPC or DDE to any number of devices. This includes clients
such as RSView32, FactoryTalk View SE, FactoryTalk View ME Station, Microsoft
Office, Visual Basic, and web pages.
Ladder logic programming using RSLogix products.
Network and device configuration and diagnostics using RSNetWorx.
Configuring Ethernet modules/devices (for example, 1756-ENET, 1756-DHRIO, and
so on).
Upgrading firmware using ControlFlash.
Browsing networks and getting device information such as firmware revision.

RSLinx Classic Gateway

RSLinx Classic Gateway extends RSLinx Classic-based communications throughout the
enterprise by connecting clients over TCP/IP networks. Programming and configuration
products such as RSLogix and RSNetWorx use a local RSLinx Classic Lite or better with
a Remote Devices via Linx Gateway driver configured to communicate to the RSLinx
Classic Gateway. Remote HMIs and VB/VBA applications including Microsoft Office
can use remote OPC to communicate to RSLinx Classic Gateway for data collection. This
allows you to have multiple distributed computers performing data collection without
having RSLinx Classic installed on each machine!
In addition to the capabilities provided in the RSLinx Classic Professional version,
RSLinx Classic Gateway offers remote connectivity to:
Multiple RSView32, FactoryTalk View SE, and FactoryTalk View ME Station clients
accessing data through one RSLinx Classic Gateway (remote OPC).
Remote PC running RSLogix connecting to a plant network over a modem for online
program changes.
Remote Microsoft Office applications displaying plant floor data such as Excel.
A web page displaying plant floor data when the web server and RSLinx Classic are
on separate computers.

RSLINX CLASSIC GETTING RESULTS GUIDE

Quick start
This section outlines the main tasks you will need to perform to use the RSLinx Classic
software. The quick start information included in this section is intended to be a high-
level, conceptual overview. When you are ready to use RSLinx Classic software, follow
the detailed procedures found in the Quick Start, which is located in the RSLinx Classic
online help. To access the online Quick Start, click Help > Quick Start from within
RSLinx Classic. For information about specific controls on RSLinx Classic windows and
dialog boxes, right-click any control.

Step 1 Configure a driver

A driver is the software interface to the hardware device that will be used to communicate
between RSLinx Classic and your processor. To configure a driver in RSLinx Classic,
click Communications > Configure Drivers. The Configure Drivers dialog box appears,
which is used for adding, editing, or deleting drivers. Click a driver to configure from the
Available Driver Types list, click Add New, and complete the information required in the
driver configuration dialog box that displays. The driver configuration dialog box varies
depending on which driver you select.

After you
complete the
driver
configuration,
the driver
name will
appear in the
Configured
Drivers list.

6

1 WELCOME TO RSLINX CLASSIC

Step 2 Configure a topic

1 Placeholder
In RSLinx Classic, a project is a storage container for one or more topics, and a topic
represents a specific path to a processor. By grouping topics together in a project, you can
make multiple topics available at the same time. To create or edit a project in RSLinx
Classic, select File > Open Project (opens the Open Project window). To create or edit a
topic, select DDE/OPC > Topic Configuration (opens the DDE/OPC Topic
Configuration window). If you attempt to create a topic without creating a project,
RSLinx Classic creates default project for you.

Select an
existing topic
from the Topic
List, and click
the Data
Collection tab
to enter polling
and packet
information.

If you selected Configure New DDE/OPC Topic by right-clicking a station in RSWho, the
Topic Name field is pre-filled for you. RSLinx Classic starts with the name of the program
running in the processor, and if this topic exists, it adds a number to the end until it finds
one that does not exist. If there are any spaces, it converts them to underscores (_). You
can change the topic name RSLinx Classic selected for you.
From the Data Source tab, click the device with which you wish to set up communication.
To add a new topic to a project that already has at least one topic configured, click New.
To edit an existing topic, click the topic from the list. Use the Data Collection tab to
include more detailed information about specific topics.

RSLINX CLASSIC GETTING RESULTS GUIDE

Step 3 Copy a link to the clipboard

RSLinx Classic provides a mechanism for easily establishing a link from RSLinx Classic
to a compatible program. To use the Copy to Clipboard function, choose an RSLinx
Classic project that contains topics. Select Edit > Copy DDE/OPC Link, select the topic,
and then click OK.
The Copy function takes the information needed to create a link and places it on the
Windows clipboard. Some packages support the ability to paste links from the clipboard.
The Copy to Clipboard function can be used with these applications only.

Select the topic

you just added
in the
DDE/OPC
Topic
Configuration
dialog box, and
browse for the
address string
for your
request.

The Copy to Clipboard function only establishes hot links from RSLinx Classic, the DDE
server, to a Windows DDE client application. The Data Table Address, Block Size,
Columns per Row, and selected topic are maintained from the last time that you used this
function. Changing these values has no effect on the last established link.

8

1 WELCOME TO RSLINX CLASSIC

Step 4 Paste a link from the clipboard

1 Placeholder
Most Windows applications support a Paste Link operation, and this feature is generally
located in the Edit menu.
Go to your application program that supports the Paste Link function. For example, in
Microsoft Excel, click an open cell in a spreadsheet where you would like to place the
data, click Edit > Paste Special, click Paste Link, and click OK. The hot link is pasted
into the spreadsheet at the location you selected and begins to update. Note that if you
click Paste, instead of Paste Link, the item string will get copied.

RSLINX CLASSIC GETTING RESULTS GUIDE

Exploring RSLinx Classic

When you start RSLinx Classic, the Rockwell Software RSLinx Classic application
window appears. The application window contains a title bar, a menu bar, a tool bar, the
application workspace where opened child windows (RSWho, diagnostics, and so on) are
displayed, and a status bar.

Title bar
The title bar shows the RSLinx Classic icon, the name of the software product (for
example, Rockwell Software RSLinx Classic Gateway), the RSWho instance number
(RSWho - 1 opens by default when you open RSLinx Classic), and the Minimize,
Maximize, and Close button.

To view the Control Menu, click the RSLinx Classic icon on the title bar. The following
items appear on the Control Menu.

Item Description

Restore Restores the window to its former size after you enlarged it by using the
Maximize command or shrunk it by using the Minimize command.
Move Allows you to reposition the window on the desktop using the arrow keys on the
keyboard.
Size Allows you to resize the window by using the arrow keys on the keyboard.
Minimize Shrinks the window to an icon, which is located on the task bar. This performs
the same function as if you clicked the Minimize button on the title bar.
Maximize Enlarges the window to occupy the entire screen. This performs the same
function as if you clicked the Maximize button on the title bar.
Close Exits the RSLinx Classic application. This performs the same function as if you
clicked the Close button on the title bar.

10

1 WELCOME TO RSLINX CLASSIC

Menu bar

1 Placeholder
The RSLinx Classic menu bar contains the following menus:

Each menu contains options for performing the following tasks:

Menu Description

File Create and open RSLinx Classic projects.

Edit Copy DDE and OPC links to the clipboard.
View Set and change RSLinx Classic interface displays, open the Event
Viewer, and click the RSWho view.
Communications Configure drivers, topics, and other RSLinx Classic options, and view
driver, DDE, other client application diagnostics.
Station Perform actions on diagnostic counters and view the Data Monitor.
DDE/OPC Configure DDE/OPC topics and view event and diagnostic information.
Security Set security user and access rights.
Window Arrange RSLinx Classic windows.
Help View help options for RSLinx Classic and other Rockwell Software
products and services.

11


RSLINX CLASSIC GETTING RESULTS GUIDE

Toolbar
The toolbar contains shortcuts to several commonly used RSLinx Classic functions. Each
toolbar button is a graphical representation of a command that is also available from the
RSLinx Classic menu bar. The following items appear on the RSLinx Classic toolbar.

Icon Menu Selection Description

File > Open Project Displays the currently defined projects and allows you to
open a DDE/OPC project.

Communications > Opens an additional instance of RSWho (one instance is

RSWho opened by default each time you open RSLinx Classic).

Communications > Displays the currently configured RSLinx Classic

Configure Drivers software drivers and allows you to add additional drivers
for use with your hardware devices.

Communications > Driver Displays a list of currently configured drivers and

Diagnostics provides the option to view diagnostic information for
each driver.

Edit > Copy DDE/OPC Provides the ability to create a DDE/OPC link between
Link RSLinx Classic and a client application such as Microsoft
Excel.

DDE/OPC > Topic Allows you to create and modify a DDE/OPC topic, which
Configuration is a specific path to a processor.

Help > Whats This? Changes the cursor to an arrow and a question mark to
indicate you are in Whats This? help mode. Click any
screen item to display help text for that item and to exit
Whats This? help mode.

12

1 WELCOME TO RSLINX CLASSIC

Application workspace

1 Placeholder
The application workspace displays open child windows, such as the RSWho and RSLinx
Classic dialog boxes.

Status bar
The status bar at the bottom of the RSLinx Classic screen provides information about the
current status of your system.

The left area of the status bar is used to pass messages to the user. For example, when you
scroll through the items on the menus, a brief description of the function of that menu item
appears in this area of the status bar.
The right area of the status bar displays:
CAP if the Caps Lock key on your keyboard is toggled for all caps.
NUM if the Num Lock key on your keyboard is set to enable the numeric keypad on
your keyboard.
SCRL if the Scroll Lock key on your keyboard is set.
The current date from your computers system clock/calendar.
The current time from your computers system clock/calendar.

13


RSLINX CLASSIC GETTING RESULTS GUIDE

14
2 Installing and Starting RSLinx Classic

2 Placeholder
This chapter explains how to install and start RSLinx Classic software. This chapter
includes information on the following:
system requirements
installation procedure
updating an existing installation
starting procedure
troubleshooting installation
After installing the software, we recommend that you read the release notes located in the
online help. The release notes may contain more up-to-date information than was
available when this document was published. To view the release notes, start RSLinx
Classic, and then choose Help > Release Notes from the main menu.

Before you begin

Rockwell Software uses a software key to implement copy protection for Windows-based
software products. Every software product has a unique key. Although, you can install the
software on any number of computers, you are only licensed to run the software on one
computer at a time. After you install the RSLinx Classic software, the Setup program will
prompt you to activate your software. For more information about moving software keys,
copy protection, and software activation, refer to Appendix A in this guide.

System requirements
To effectively use RSLinx Classic, your personal computer must meet the following
minimum hardware and software requirements:

Hardware requirements
To install RSLinx Classic software, you will need the following hardware:
a Pentium 100MHz processor with at least 32 Megabytes (MB) of RAM. This version
of RSLinx Classic will not run on Alpha, MIPS, or Power PC processors.
at least 35 MB of available hard drive space; more hard disk space may be required for
specific application features.
a 16-color, SVGA display with 800 by 600 or greater resolution.
a mouse or other Windows-compatible pointing device.
an Ethernet card and/or Allen-Bradley communications device or cable.

15


RSLINX CLASSIC GETTING RESULTS GUIDE

Software requirements
To run RSLinx Classic, you must have Microsoft Internet Explorer 6.0 (or later), and one
of the following operating systems:
Microsoft Windows XP Professional, XP SP1, SP2, or SP3 (32-bit)
Microsoft Windows Server 2003,SP1, SP2, R2, or R2 SP2 (32-bit), or Microsoft
Windows Server 2003 R2 Standard SP2 (64-bit)
Microsoft Windows Server 2008, SP1, SP2, R2, or R2 SP2 (32-bit), or Microsoft
Windows Server 2008 Standard SP2, R2 SP1(64-bit)
Microsoft Windows Vista Business SP1, SP2 (32-bit) or Microsoft Windows Vista
Home Basic SP1, or SP2 (32-bit)
Microsoft Windows Vista Home Premium(N) SP1,SP2 (32-bit) or Microsoft
Windows Vista Home Premium(N) SP1,SP2 (64-bit)
Microsoft Window 7 Professional, SP1(32-bit) or Microsoft Windows 7 Professional,
SP1(64-bit)
Microsoft Window 7 Home Premium (32-bit) or Microsoft Window 7 Home Premium
(64-bit)
Installing RSLinx Classic software
You can install one or more Rockwell Software products to a single personal computer.

While installing RSLinx Classic software, you will have the opportunity to specify a directory. The
suggested and recommended default directory is x:\Program Files\Rockwell Software\RSLinx
where x is the letter of the drive to which you are installing RSLinx Classic.
In procedures that appear throughout this document, it is assumed that you used the default
name. If not, substitute the actual name you specified for the default name shown.

To install RSLinx Classic, you must logon to your computer as an Administrator.

To install RSLinx Classic software, perform the following steps:

1. Start your Windows operating system if it does not start automatically.
2. Insert the RSLinx Classic CD-ROM into the CD-ROM drive.

If autorun is: Then:

enabled The Setup program starts automatically and the RSLinx Classic opening screen
appears. Proceed to step 3.
disabled Perform the following steps:
1. Click Start, and then click Run. The Run dialog box appears.
2. In the Open control, type x:\setup, where x is the letter of the drive containing the
RSLinx Classic CD-ROM, and click OK. The RSLinx Classic opening screen appears.

16

2 INSTALLING AND STARTING RSLINX CLASSIC

3. Follow the instructions that appear on the screen.

2 Placeholder
On the RSLinx Classic installation dialog box Click Release Notes to ensure your
system meets the minimum requirements and to learn about new features included
with this version of RSLinx Classic. After you have read the Release Notes, click
Install RSLinx Classic.
On the Welcome dialog box Read the RSLinx Classic introductory information, and
then click Next.
On the Software License Agreement dialog box Read the entire Software License
Agreement. Enable I accept the terms in the license agreement and click Next to
accept and continue installation, or enable I do not accept the terms in the license
agreement and click Next to decline and exit the installation.
On the Customer Registration Information dialog box Type your user name, the
name of your organization, and the serial number of your RSLinx Classic software,
and then click Next.

You can find the serial number on the product box label or the CD-ROM case.

On the Standard Setup dialog box click the RSLinx Classic options you wish to
install. You have options such as selecting a destination directory other than the
default location, and selecting specific EDS files. Click Next.
On the Ready to Install the Program dialog box click Install to start the RSLinx
Classic installation process.
On the InstallShield Wizard Complete dialog box specify if you wish to install
activation and click Finish. (For information on activation, refer to Appendix A in
this guide). RSLinx Classic reverts to the Lite version if the proper activation is not
installed. You must restart your computer before using RSLinx Classic. The RSLinx
Classic installation is complete.
4. When you are finished installing the software, remove the RSLinx Classic CD-ROM
from the CD-ROM drive and the Master disk from the disk drive. Store them in a safe
place.

Updating an existing installation

Perform the following steps to update an existing RSLinx Classic installation:
1. Insert the RSLinx Classic CD-ROM into the CD-ROM drive and click Next on the
Welcome dialog box.
2. On the Program Maintenance dialog box, enable Remove to remove RSLinx Classic
from your computer.

17


RSLINX CLASSIC GETTING RESULTS GUIDE

3. Click Yes, and then Backup to backup your drivers and topics. Click Close to close
the Backup/Restore dialog box.
4. Click Yes to remove EDS files from your computer.
5. At the Remove the Program dialog box, click Remove to confirm the uninstall
procedure.
6. After the uninstall procedure is complete, click Finish.
7. Refer to the Installing RSLinx Classic Software section to install the updated
version of RSLinx Classic. To restore the drivers and topics you backed up in step 3,
click Start, and then click Programs > Rockwell Software > RSLinx > RSLinx
Classic Backup Restore Utility.

If activation was previously installed, it is not necessary to move the activation. If activation
was not previously installed, you must use the FactoryTak Activation Manager to get an
activation, or insert the Master disk into the 3.5-inch disk drive and follow the instructions that
appear on the screen. For more information on activation, refer to Appendix A in this guide.

Starting RSLinx Classic software

To start RSLinx Classic software, click Start, and then click Programs > Rockwell
Software > RSLinx > RSLinx Classic.

We assume that you used the default names for the directory and program group. If you did not
use the default names, substitute the actual names that you specified for the default names
shown.

Troubleshooting installation
If RSLinx Classic does not start or run properly, consider the following:
Does your computer have enough memory? Running RSLinx Classic requires a
minimum of 32 MB of RAM.
Does your computer have enough disk space? Running RSLinx Classic requires a
minimum of 35 MB of available hard disk space.
Do you have the correct activation for RSLinx Classic installed? If your RSLinx
Classic installation displays as RSLinx Classic Lite, RSLinx Classic Single Node, or
RSLinx Classic OEM, the proper activation files were not installed. See Activate
RSLinx Classic with FactoryTalk Activation on page 29 for information about
activation files.
Have you reinstalled an earlier Service Pack or removed a component, such as
DCOM, that RSLinx Classic requires?

18
3 RSWho

3 Placeholder
This chapter describes features of the RSWho network browser interface. RSWho allows
you to view all the active network connections from a single screen.

Using RSWho
RSWho is RSLinx Classics main window that displays networks and devices in a style
similar to Windows Explorer. A variety of integrated configuration and monitoring tools
are accessible from the right mouse button in RSWho. Some of the available tools are the
ControlLogix Gateway Configuration Tool for Controlnet, DeviceNet, Ethernet, 1756-
DHRIO, and 1756-DH485 modules, and a Data Monitor for monitoring live data out of
any ControlLogix, PLC-5, SLC, or MicroLogix family controllers.

The left pane of RSWho is the tree control, which shows networks and devices. The right
pane is the list control, which shows all members of a collection. A collection is a
network, or a device that is a bridge. Right-click in the list control and choose a view
option of Large Icons or Details.

A device that appears with a red X indicates that RSWho previously recognized this device, but
now it cannot. The red X indicates a communication status error, such as unplugging a
recognized device. These devices can be removed from the RSWho display by right-clicking the
device and clicking Remove.

19


RSLINX CLASSIC GETTING RESULTS GUIDE

RSWho browsing
The RSWho icon indicates a network. If this icon is animated, the network is being
browsed. Click a network or device to start browsing.
When the network or device is collapsed (indicated by the + sign), click + or double-click
the network or device icon next to the + to expand the view and begin browsing. When the
network or device is expanded (indicated by the sign), click or double-click the
network or device icon next to the to collapse the view.
If the Autobrowse checkbox is enabled, RSWho continuously browses the selected device
or network (regardless of whether or not the selection is expanded or collapsed). If
Autobrowse is cleared, the Refresh button is active. Clicking Refresh instructs RSWho to
perform one browse cycle of the selected device or network. Since Refresh only performs
one browse cycle, clicking Refresh multiple times may be necessary to discover
everything on the network.
Right-click a supported device to select Station Diagnostics, Configure DDE Topic, or
other supported services for that device.

20
4 OPC and DDE Connectivity

4 Placeholder
This chapter describes the features of:
OLE for Process Control (OPC)
Dynamic Data Exchange (DDE)

OLE for Process Control (OPC)

OPC, or OLE for Process Control, is a communication standard based on OLE technology
provided by Microsoft and developed and maintained by the OPC Foundation, a coalition
of industrial/manufacturing companies of which Rockwell Automation is a member. The
charter of this group is to provide an industrial standard exchange mechanism between
plant floor devices and client applications. RSLinx Classic is an OPC-compliant server
exposing the required interfaces for an OPC client application to access data consistent
with other OPC-compliant servers. The added benefit provided from RSLinx Classic is its
ability to provide several DDE formats in addition to OPC.
OLE for Process Control (OPC) is designed to allow client applications access to plant
floor data in a consistent manner. OPC provides many benefits:
Hardware manufacturers only have to make one set of software components for
customers to use in their applications.
Software developers do not have to rewrite drivers because of feature changes or
additions in a new hardware release.
Customers have more choices with which to develop world class integrated
manufacturing systems.
With OPC, system integration in a heterogeneous computing environment is simple.
Leveraging the OLE/COM environment is possible.
RSLinx Classic is an OPC-compliant server. For more information about OPC, visit the
OPC Foundation web site at www.opcfoundation.org. For more information on using
OPC with Rockwell Software products, visit our web site at
http://support.rockwellautomation.com.

Dynamic Data Exchange (DDE)

Dynamic Data Exchange (DDE) is a standard inter-application communication protocol
built into Microsoft Windows operating systems and supported by many applications that
run under Windows. DDE takes data from one application and gives it to another
application. It allows Windows programs that support DDE to exchange data between
themselves.

21


RSLINX CLASSIC GETTING RESULTS GUIDE

A DDE server is a program that has access to data and can provide that data to other
Windows programs.
A DDE client is a program that can obtain data from a server.
By specifying an application, topic, and item, a client application can exchange data with
a server application.
DDE works like a conversation between two people. The people represent the different
applications running under Windows, and the data they share is what they are talking
about. RSLinx Classic does not know the type of data it is receiving, it only knows that a
DDE link is providing the data.
For example, if you have a DDE link from RSLinx Classic to an Excel spreadsheet, Excel
does not know that you are sending a counter value into a spreadsheet. All Excel sees is
data.
For example, RSLinx Classic is the application name, PLC5TOPIC1 is an example topic
name, and C5:0.ACC is an example item, in this case a counter accumulator in an Allen-
Bradley PLC-5.

Not all applications that run under Microsoft Windows support DDE. Check with an applications
manufacturer before purchasing an application for use with RSLinx Classic.

For more information about DDE, refer to the DDE topic in the RSLinx Classic help file.

DDE/OPC client connectivity

RSLinx Classic provides connectivity for client applications using OPC or multiple DDE
data formats. The OPC and AdvanceDDE interfaces provide optimized read operations by
packing multiple requests from multiple clients in a single transaction. In configuring a
DDE Topic, you can specify whether or not you want DDE poke operations optimized.
Optimized pokes only work with PLC-5 and SLC processors.
The benefit of optimizing DDE poke operations is packing multiple updates in a single
write operation, thus reducing the overall number of packets required. Operations such as
downloading a recipe can take advantage of this feature.
Other DDE formats supported include FastDDE (for Wonderware clients), XL_Table and
CF_Text to support Microsoft Office products, and other generic DDE client applications.

22
5 Finding the Information You Need

5 Placeholder
Use this chapter to review the sources of additional information about RSLinx Classic
software. This chapter helps you to find what you need efficiently by describing how to:
Use the online help
Access online guides
Participate in Rockwell Software training courses
Contact Technical Support

Using the online help

RSLinx Classic online help provides general overview information, comprehensive step-
by-step procedures, and context-sensitive, dialog box control definitions for working with
all of the features in the software. To view online help while running RSLinx Classic:
choose RSLinx Classic Help from the Help menu on the RSLinx Classic main
window,
click Help on any RSLinx Classic dialog box or property page,
position the cursor over a control with which you want help and right-click, or
press F1.

23


RSLINX CLASSIC GETTING RESULTS GUIDE

Accessing help for a control or field

To display a definition for a control or a field, click the Whats This? icon in the upper
right corner of the dialog box, drag the cursor to the selected area, and then click to
display the definition. In this example, the Property control was selected.

24

5 FINDING THE INFORMATION YOU NEED

Finding step-by-step procedures

5 Placeholder
To view a list of tasks related to the current topic, move to the What do you want to do?
section at the bottom of the help window and select one of the listed tasks. The current
topic is replaced with a step-by-step procedure for completing the task.
For example, from the What is a driver? help topic, if you select Add a driver under the
What do you want to do? section, the procedure that describes how to add RSLinx Classic
drivers displays.

25


RSLINX CLASSIC GETTING RESULTS GUIDE

Finding definitions
Within the RSLinx Classic help, blue text highlighted with an underline indicates a link to
a pop-up definition or a link to a related topic. For example, in the Dynamic Data
Exchange help topic, application, topic, and item are pop-up definitions, and DDE link is
a link to a related topic.

Accessing online guides

You can gain immediate access to product documentation through the online guides
included with RSLinx Classic. The online guides include this Getting Results Guide, as
well as any reference guides, in an electronic book format. The online guides are included
in a portable document format (PDF) on your RSLinx Classic CD. These files must be
viewed using the Adobe Acrobat Reader software, which you can download for free from
the Adobe website at www.adobe.com.

26

5 FINDING THE INFORMATION YOU NEED

Training

5 Placeholder
One of the best ways to increase your proficiency at using Rockwell Software products is
to attend a Rockwell Software training program. Our training programs can help you
master the basics and show you how to unleash the full potential of our software.
We offer a wide range of training programs, from regularly scheduled classes conducted at
Rockwell Software facilities, to custom-tailored classes conducted at your enterprise. The
size of each class is kept small intentionally to maximize student engagement.
If you would like more information about our training programs, visit the Rockwell
Software site on the World Wide Web or contact the Rockwell Software Training
Coordinator. Our World Wide Web address and telephone numbers appear on the inside
front cover of this document.

Technical support
If you cannot find answers to your questions in the Getting Results with RSLinx Classic
guide, the online help, or the online guides, you can call Rockwell Software Technical
Support at the numbers listed on the inside front cover of this guide. The technical support
staff is available Monday through Friday from 8 A.M. to 5 P.M. Eastern Time, except
holidays. You can also access the Rockwell Software Online Support Library from the
web site listed on the inside front cover of this guide.

When you call

When you call, you should be at your computer and prepared to give the following
information:
product serial numbers
product version number
The product serial numbers and version number can be found in the software by
clicking Help > About RSLinx Classic.
version of Windows and any service packs that you are using
hardware you are using
exact wording of any errors or messages that appeared on your screen
description of what happened and what you were doing when the problem occurred
description of how you attempted to solve the problem

27


RSLINX CLASSIC GETTING RESULTS GUIDE

28
A Activation

A Placeholder
RSLinx Classic 2.59.00 (CPR 9 Service Release 5) and later only supports FactoryTalk
activation.
Notes: EvRSI activation is replaced by FactoryTalk Activation. If you are a current user using
EvRSI activation and want to upgrade to RSLinx Classic 2.59.00, please contact your local
Rockwell Automation Sales office or Rockwell Automation Technical Support for information on
migrating your activations to FactoryTalk Activation. For Rockwell Automation Technical Support
in the U.S. call 1 (440) 646-3434. Outside the U.S. see
http://www.rockwellautomation.com/locations/.

RSLinx Classic v2.59.00 (CPR 9 SR 5) and later displays a message indicates the
activation status when you place the cursor over the tray icon in the notification area. If
the activation status changes during runtime, the message shows the new status after you
restart RSLinx Classic.

Grace period
RSLinx Classic v2.59.00 (CPR 9 SR 5) and later supports a seven day activation grace
period when a valid activation is not found. During grace period:
When the software is started, a message is logged to the FactoryTalk Diagnostic log
every four hours until a valid activation is found.
RSLinx Classic can be started an unlimited number of times. If the grace period ends
and a valid activation has not been found, RSLinx Classic Lite is started.

If RSLinx Classic is unable to successfully obtain valid activations (for example, a network
failure occurs), the software will attempt to run in grace period for up to seven days.

Activate RSLinx Classic with FactoryTalk Activation

RSLinx Classic 2.59.00 (CPR 9 Service Release 5) with FactoryTalk Activation supports
node locked and concurrent activations. A node-locked activation allows one specific
computer or any computer use a specific hardware dongle to use Rockwell Software
products at the same time. There are two kinds of node-locked activations:
Local node-locked activations - activations that locked to a stand-alone computer to
allow unlimited software use on the computer.
Mobile node-locked activations - activations that locked to a hardware dongle to
allow unlimited software use on any computer that has the hardware dongle attached
A concurrent activation allows multiple computers across a network to use Rockwell
Software products at the same time. There are two kinds of concurrent activations:

29


RSLINX CLASSIC GETTING RESULTS GUIDE

floating activations - activations that float from an activation server to any

computer on a network that needs them.
borrowed activations - activations that are retrieved from a server for a specific
period of time before expiring and returning automatically to the pool of available
activations on the server.

You can only borrow RSLinx Classic v2.59.00 (CPR 9 SR 5) activations if you are running
RSLinx Classic as an application. If you are running RSLinx Classic as a service, you cannot
borrow activations.

How to activate RSLinx Classic

To activate your copy of RSLinx Classic, perform the following steps:
1. Click Install FactoryTalk Activation on the Optional Steps screen of the RSLinx
Classic Install program.
2. Once FactoryTalk Activation Manager is installed, click Start > Programs >
Rockwell Software > FactoryTalk Activation > FactoryTalk Activation Manager
to run the FactoryTalk Activation Manager. For more information on using the
FactoryTalk Activation Tool, click Learn More or Help in the FactoryTalk Activation
Manager window.
3. Click Get New Activations and follow the instructions in the FactoryTalk Activation
Manager.

Finding more information about FactoryTalk Activation

For help with FactoryTalk Activation at any point, you can click:
Help on the FactoryTalk Activation Manager window
View Activation Instructions on the Required Steps of the RSLinx Classic Install
program
the Help link on the Rockwell Software Activation website:
https://licensing.software.rockwell.com
If you cannot connect to the Internet, call Technical Support for help creating an
activation file from an e-mail or a fax.
Phone: 440-646-3434 in North America. Outside of North America, call your local
support organization.

30
B Secure RSLinx Classic with FactoryTalk

B Placeholder
Security
FactoryTalk Security is intended to improve the security of your automation system by
limiting access to those with a legitimate need. FactoryTalk Security authenticates user
identities and authorizes user requests to access a FactoryTalk-enabled system. These
security services are fully integrated into the FactoryTalk Directory and are included as
part of the FactoryTalk Services Platform that installs with many products.
For more information on how to use security services, please refer to FactoryTalk
Securitys Online help.

How do I set up security in RSLinx Classic?

RSLinx Classic v2.59.00 (CPR 9 SR 5), along with supporting RSSecurity, also supports
FactoryTalk Security. FactoryTalk Security is intended to improve the security of your
automation system by limiting access to those with a legitimate need. FactoryTalk
Security authenticates the identities of users and authorizes user requests to access a
FactoryTalk-enabled system against a set of defined user accounts and access privileges
held in the FactoryTalk Directory. For more information on FactoryTalk Security, read the
About FactoryTalk Security topic located in RSLinx Classics Online Help. The
following table explains the steps you would need to perform to implement one of the two
security mechanisms (FactoryTalk Security and RSSecurity) supported by RSLinx
Classic.

If you are Do this

a user who wants to: 1. Install RSSecurity Emulator from Start > Programs > Rockwell
Software > FactoryTalk Tools > RSSecurity Emulator Install.
use FactoryTalk Security,
and
has never configured
security using RSSecurity

31


RSLINX CLASSIC GETTING RESULTS GUIDE

If you are Do this

Note: During RSSecurity Emulator install, the FactoryTalk

Directory screen appears (see the following figure) where you will
be prompted to select the FactoryTalk Directory (Network or Local)
that RSSecurity Emulator should use. At this step, be sure to make a
note of the directory you choose -- you will require this information
when adding security policies to FactoryTalk Directory in step 4.

2. Install RSLinx Classic from RSLinx Classic Required Steps

Install screen.
3. While running RSLinx Classics installation wizard, the Security
Configuration Selection screen appears. On this screen, click the
Enable Security option.

32

B SECURE RSLINX CLASSIC WITH FACTORYTALK SECURITY

If you are Do this

B Placeholder
4. Click Next to finish RSLinx Classic install.
5. Open FactoryTalk Administration Console from Start >
Programs > Rockwell Software > FactoryTalk Administration
Console to add user accounts and set security settings to secure
RSLinx Classic.
Note:
For more information on how to add user accounts, read the Add
a user account topic in FactoryTalk Administration Console help,
located at Manage FactoryTalk-enabled systems > Log on and
configure security > Configure security > How To > Work with user
accounts > Add a user account.
For more information on how to secure RSLinx Classic's features,
read the Secure Product Features topic in FactoryTalk Security help,
located at Configure Security > How to > Set up product policies >
Secure product features.
For more information on what you can secure in RSLinx Classic,
read the What can I secure in RSLinx Classic topic in RSLinx Classic
Online help, located at How to > Secure RSLinx Classic with
FactoryTalk > What can I secure in RSLinx Classic.

6. Open RSLinx Classic from Start > Programs > Rockwell

Software > RSLinx > RSLinx Classic, and click Security > Set
Security User from the main menu. In the New User dialog box,
enter the username and password of the user you created in
FactoryTalk Administration Console in step 5, and click OK.
Note: Because access to features in RSLinx Classic is governed by
the permissions you set for a user in FactoryTalk Administration
Console, some features out of the 13 securable features in RSLinx
Classic may be inaccessible (for example, if the user you entered in
step 6 does not have the appropriate permission).
This completes the security setup for RSLinx Classic.

33


RSLINX CLASSIC GETTING RESULTS GUIDE

If you are Do this

a user who wants to: 1. Run the Security Config Explorer by clicking Start > Programs >
Rockwell Software > Security Server Network Edition > Security
use FactoryTalk Security, as
well as Config Explorer.
import an existing 2. Locate the RSSecurity Configuration (*.bak) file, and click File >
RSSecurity Configuration into Export to backup the *.bak file.
the FactoryTalk Directory
3. Close the Security Config Explorer.
4. Uninstall RSSecurity Server/Client (whichever is installed on this
machine) from Start > Settings > Control Panel > Add/Remove
Programs.
5. Install RSSecurity Emulator from Start > Programs > Rockwell
Software > FactoryTalk Tools > RSSecurity Emulator Install.
Note: During RSSecurity Emulator install, the FactoryTalk
Directory screen appears (see the following figure) where you will
be prompted to select the FactoryTalk Directory (Network or Local)
that RSSecurity Emulator should use. At this step, be sure to make a
note of the directory you choose you will require this information
when importing the .bak file into the FactoryTalk Directory in step 9.

34

B SECURE RSLINX CLASSIC WITH FACTORYTALK SECURITY

If you are Do this

B Placeholder
6. Install RSLinx Classic from RSLinx Classic Required Steps
Install screen.
7. While running RSLinx Classics installation wizard, you will see
the Security Configuration Selection screen. On this screen, click the
Enable Security option.

35


RSLINX CLASSIC GETTING RESULTS GUIDE

If you are Do this

8. Click Next to continue with the installation.

9. Import RSSecurity Server database by clicking Start >
Programs > Rockwell Software > FactoryTalk Tools > Import
RSSecurity Configuration.
Note: While running the Import RSSecurity Configuration utility, you
will see the FactoryTalk Security Import dialog box (see the
following figure). In the Destination listbox on this dialog box, be
sure to import the .bak file to the directory where you installed the
Emulator (see step 5). (Selecting the default option in the destination
field stores your file in the Network directory.)

10. Open RSLinx Classic, and click Security > Set Security User
from the main menu. In the New User dialog box, enter the
username (domain name\username) and password of the RSSecurity
user.
Note: If you do not remember the usernames of the users that existed
in your old RSSecurity setup, perform the following steps:
a. Run FactoryTalk Administration Console by clicking Start >
Programs > Rockwell Software > FactoryTalk Administration
Console.
b. In the Explorer pane, expand the FactoryTalk Local or Network
Directory tree, and then expand the Systems folder until the Users
folder is visible.
c. In the Users folder, the users who have domain associated with
their usernames (for example, na\Bob) are your RSSecurity users.
Note: Because access to features in RSLinx Classic is governed by
the permissions you set in the security server, some features out of the
13 securable features in RSLinx Classic may be inaccessible (for
example, if the user you entered in step 10 does not have the
appropriate permission).
This completes the security setup for RSLinx Classic.

36

B SECURE RSLINX CLASSIC WITH FACTORYTALK SECURITY

What can I secure in RSLinx Classic?

B Placeholder
The following table explains the features you can restrict access to in RSLinx Classic. For
example, you might restrict the ability to shut down the RSLinx Classic service to a small
group of users, to prevent parts of your automation system from going down at runtime.

If you selected Network Directory during the RSLinx Classic security setup procedure, you must
use FactoryTalk Security to secure the following list of features. For more information, please
contact your local Rockwell Automation distributor.

Securable feature Description

Clear DDE/OPC Event Log Displays information on any DDE/OPC error messages logged
while running RSLinx Classic with DDE/OPC compliant programs.
Configure CIP Options Administers how PCCC requests that use the CIP protocol are sent
over networks.
Configure Client Applications Maps configured and running RSLinx Classic drivers to legacy
INTERCHANGE C API, as well as displays the link identifier of
the virtual network maintained by RSLinx Classic for the use of
Client Applications in the virtual link unsolicited messaging model.
Configure ControlLogix Provides you with information about the modules in your
Gateway ControlLogix Gateway.

Configure DDE/OPC Topic Configures DDE/OPC topic.

Configure Drivers and Configures (add, edit, or delete) drivers and shortcuts that allow
Shortcuts RSLinx Classic to communicate with your PLC, as well as provide
quick access to specific networks.
Configure Gateway Allows you to enable the RSLinx Classic Gateway.
Configure Network Properties Allows you to configure network properties.
Edit DDE/OPC Project Allows you to edit your DDE/OPC project.
Edit Options Displays the options dialog box which contains the General and
DDE tabs.
Reset Station Diagnostic Clears the counters in the station diagnostic screens.
Counters
Shutdown Shuts down RSLinx Classic.
View NT Event Log Records important system occurrences such as RSLinx Classic
drivers successfully starting and stopping.

37


RSLINX CLASSIC GETTING RESULTS GUIDE

Considerations when using RSLinx Classic with FactoryTalk

Security
Keep the following in mind when using RSLinx Classic with FactoryTalk Security:

NETWORK/LOCAL DIRECTORY
The FactoryTalk Services Platform can install two completely separate and independent
FactoryTalk Directories: a Local Directory and a Network Directory. User accounts,
passwords, and security permissions to securable features are completely separate and
cannot be shared between the Network Directory and the Local Directory. Configuring
any of these items on one directory does not configure them on the other. Similarly,
changing the password to a user account in one directory does not change the password
the other directory, even if the account has the same name in both directories.
When configuring RSLinx Classic to work in one of the two directories, please keep the
following in mind :
RSLinx Classics security policies and RSSecurity Emulator must be installed in the
same directory (either Local or Network).
If you configured RSLinx Classic to work in the Network Directory, you must use
FactoryTalk Security to administer centralized security across the network.
If you configured RSLinx Classic to work in Local Directory and want to use
FactoryTalk Security, you can administer security only on a single computer.

38

B SECURE RSLINX CLASSIC WITH FACTORYTALK SECURITY

RESET NETWORK TREE

B Placeholder
When RSLinx Classic is reinstalled, all security settings that were previously configured
for networks and devices are lost. You must redefine these security settings in the
Networks and Devices tree, or in RSWho. For more information, read the Network and
Devices are not displayed correctly topic in FactoryTalk Securitys help, located at
Configure security > Troubleshooting security > Network and Devices are not
displayed correctly.

MISCELLANEOUS
Keep the following additional FactoryTalk Security considerations in mind:
If you did not check 'enable security' option during RSLinx Classic install, but want to
enable security now, you will need to uninstall and then reinstall RSLinx Classic.
Every time you are in RSLinx Classic, be sure to verify that the Username displayed
in the Current Security User text box of the Set Security dialog box (Security > Set
Security User) is correct. If it is incorrect, enter the new Username and Password,
and click OK.

39


RSLINX CLASSIC GETTING RESULTS GUIDE

40
Glossary

C Welcome
Activation file A hidden, read-only, system file that activates a Rockwell Software
product. The software will run only if your system can find the correct activation file.
Activation key Activation files contain a database of activation keys. Each key is
particular to a certain product and must be accessible on a local or remote drive for that
product to run.
Driver The software interface to the hardware device that will be used to
communicate between RSLinx Classic and your processor.
Dynamic Data Exchange (DDE) A form of inter-process communication. When two
or more programs that support DDE are running simultaneously, they can exchange
information and commands.
License Authorization to use a specified number of instances of software. A products
activation key contains a license for each copy of the software you have purchased.
Links The data path established for one or more channels between two or more
stations. DDE links can be hot, warm, or cold.
OPC Provides an industry-standard mechanism to communicate and exchange data
between clients and servers using OLE technology.
Packet The transmission unit exchanged at the network layer.
Poke DDEs version of a write.
Read To acquire data from somewhere (memory, an output, another station).
Topic Represents a specific path to a processor.
Write To load data into somewhere (memory, an output, another station).

41


RSLINX CLASSIC GETTING RESULTS GUIDE

42
Index

Index
A G
activation 29 Gateway version 5
FactoryTalk grace period 29
activate 30
application workspace 13 H
autorun 16
hard drive space 15
hardware requirements 15
C
classes 27 I
close 10
install
communications device 15
FactoryTalk Services Platform 31
configure a driver 6
RSLinx Classic 15
configure a topic 7
RSSecurity Emulator 31
context-sensitive help 12, 23
intended audience 1
control definitions 23
Control menu 10
copy a link 8 L
license 15
D Lite version 4
Local Directory 38
diagnostics 12
directory location 17
document conventions 2 M
documentation set 1 maximize 10
driver configuration 6 memory 18
Dyamnic Data Exchange 21 menu bar 11
minimize 10
E mouse 15
move 10, 37
electronic book format 2, 26
ethernet card 15
N
F Network Directory 37
FactoryTalk Activation 29
FactoryTalk Activation Manager O
help 30 OEM version 5
FactoryTalk Administration Console 33 OLE for Process Control 21
FactoryTalk Security user 31 online guides 26
feedback 2 online help 1, 15, 23

43


RSLINX CLASSIC GETTING RESULTS GUIDE

P Set Security dialog box 39

set up security 31
paste a link 9
serial number 17
pointing device 15
serial numbers 27
pop-up definition 26
Single Node version 4
product
size 10, 37
serial numbers 27
software license agreement 17
version number 27
software requirements 16
standard setup 17
Q starting RSNetWorx for DeviceNet 15, 18
Quick start 6 status bar 13
step-by-step procedures 23, 25
R support 27
support library 27
RAM 15, 18
SVGA graphics adapter 15
registration information 17
system requirements 15
related topic 26
release notes 15
removing T
programs from computer 18 tasks 25
requirements technical support 27
hardware 15 title bar 10
software 16 toolbar 12
restore 10, 31, 37 topic configuration 7
RSLinx Classic icon 10 training 27
RSLinx Classic types 3 troubleshooting
RSSecurity Emulator 31 installation 18
RSSecurity user 34 types of RSLinx Classic 3

S U
security 31 updating an existing installation 17
Add user accounts 33
considerations 38 V
enable security option 39
version numbers 27
FactoryTalk Administration Console 33
FactoryTalk Security user 31
FactoryTalk Services Platform 31 W
Local Directory 38 Whats This? help 24
Network Directory 37, 38 Windows
Network Tree 39 2003 16
RSSecurity Emulator 31, 38 7 16
RSSecurity user 34 Vista 16
securable features 37 XP 16

44