Scribd
Upload
28 views

Monitoring System Resources Using SAR (System Activity Report)

Monitoring System Resources Using SAR (System Activity Report)

Uploaded by

Linux Techlab
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
28 views

Monitoring System Resources Using SAR (System Activity Report)

Monitoring System Resources Using SAR (System Activity Report)

Uploaded by

Linux Techlab
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Object1

LinuxTechLab.com

Monitoring system resources


using SAR (System Activity
Report)

Originally published on

LinuxTechLab.com
Once the servers have created & have been deployed to development or production etc,
main task of system admin is to make sure that servers keep running by continuously
monitoring its resource usage like memory utilization, CPU utilization etc with the help
of various utilities. One such utility that is used for monitoring RHEL/CentOS servers is,
SAR.

SAR or System Activity Report is used for monitoring of the resources of a Linus
server. It can be used to generate reports relating to performance of a system i.e CPU
reports, Memory reports, Disk reports etc. It saves reports in the form of log files on the
system.

In this tutorial, we are going to discuss usage of SAR with the help of some examples but
first we will install SAR on our system.

Installation
To install SAR utility on the system, SYSSTAT package is required. To install sysstat , run
$ yum install sysstat

Now start & enable the sysstat service to start using SAR,
$ systemctl start sysstat
$ systemctl enable sysstat

Once the service is active, logs for the current day will be created in /var/log/sa folder
in the file sa15, where 15 is the current date. Files for the older dates will be archived .
We can also change the number of days for which we keep our files by changing the
HISTORY parameter in the sysstat configuration file i.e. /etc/sysconfig/sysstat.

Syntax for SAR utility


Syntax for using sar is ,
$ sar option interval(in seconds) number of records
An example would be
$ sar 2 5
Here , sar will give report generated 2 seconds apart with total 5 records.
Examples of SAR

Generating CPU report of the CPUs


The sar command to generate CPU report for the CPUs on the system is,
$ sar -u 2 5

Generating Memory report


Option used with sar for generating the memory report is -r,
$ sar -r 2 5

Generating Block device statistics


Option to create block device report is -d & its used with -p to make the report into a
pretty readable format,
$ sar -d -p 2 5

Generating SWAP report


Option to create SWAp memory report for the system is -S,
$ sar S 2 5

Generation i/O activity of the system


To check the I/O activity of the whole system, option used with sar is -b
$ sar -b 2 5

To view network statistics


To check the network stats of the system, option in -n but it used with a keyword or we
can use ALL in place of a particular keyword to view all the network stats.
$ sar n Keyword (or ALL)
Keywords can be, DEV For network interface statistics,
EDEV Display network device failure statistics
IP For IPv4 network traffic
EIP For IPv4 network errors
ICMP For ICMPv4 network traffic
EICMP For ICMPv4 network errors
TCP For TCPv4 network traffic
ETCP For TCPv4 network errors
UDP For UDPv4 network traffic
NFS For NFS client activities
NFSD For NFS server activities
SOCK For sockets in use for IPv4
SOCK6, IP6, EIP6, ICMP6, UDP6 are for IPv6
Note: When using ALL as a parameter, reports generated can be very long.

Saving output of sar to a file


We can also save the output of any sar command to a file using the options -o,
$ sar r 2 4 o
/home/log
Where, /home/log is the location of file.

These were some the examples that are used with sar command. For queries/questions,
please use the comment box below.

If you think we have helped you or just want to support us, please consider these :-
Connect to us: Facebook | Twitter | Google Plus

LinuxTechLab.com

You might also like