Introduction

Basic Logic Gates

Truth Tables
LOGIC GATES Logical Functions
Truth Tables
COMP370 Logical Expression
Introduction to Computer G hi l Form
Graphical F
Architecture

Most Difficult Reading Topics Logic

Logic gates and figuring out how to read Formal logic is a branch of
them
th mathematics
th ti that
th t deals
d l
Logical Circuit Equivalence with true and false values
NAND NOR and XOR truth tables instead of numbers.
Using the rules to create and read the In the mid-19th century, George Bool
logic gates using 0's and 1's developed many Logic ideas.
Transistor implementation Boolean logic deals with equations where
the operators are AND or OR instead of
Difference between positive logic and add and multiply.
negative logic

1
 Electric Logic Logic Gates & Symbols
Logical values can easily be expressed by
an electrical
l t i l circuit.
i it
True or 1 can be defined as voltage on a
wire while False or 0 can be defined as
no voltage. We will use positive logic.
Analog values can be anything while digital
only has discrete values, 0 or 1
Electrical devices called gates can Note that gates can have more than 2 inputs.
implement the logical

AND gate Inputs and Outputs

The AND gate is an electronic circuit that The inputs can be considered as logical
gives a true output (1) only if all its inputs (t
(true or false)
f l ) values.
l
are true. A dot () is used to show the AND
operation i.e. AB. Note that the dot is You can also think of the inputs as voltage
sometimes omitted i.e. AB (true) or ground (false).
The output of the gate will also be voltage
(true) or ground (false)
(false).

inputs output

2
 OR gate NOT gate
The OR gate is an electronic circuit that The NOT gate is an electronic circuit
gives a true output (1) if one or more of its that produces an inverted version of
inputs are true. A plus (+) is used to show the input at its output.
the OR operation. It is also known as an inverter.
If the input variable is A, the inverted
output is known as NOT A.
This is also shown as A', or with a
bar over the top
A A
0 1
1 0

NAND gate NAND gate Cont.

This is a NOT-AND gate which is equal
t an AND gate
to t followed
f ll d by
b a NOT
gate.
The outputs of all NAND gates are true
if any of the inputs are false.
The symbol is an AND gate with a
small circle on the output. The small
circle represents inversion.

3
 Logical Equivalence NAND as a NOT
A NAND gate gives the same results as an
AND gate feeding into a NOT gate. Below are two ways that a NAND gate
Circuits are logically equivalent if they can be
b configured
fi d to
t produce
d a NOT
produce the same truth table output. gate. They are logically equivalent.
It can also be done using NOR logic
gates in the same way.
A B AB NOT AB NAND AB
0 0 0 1 1
0 1 0 1 1 A A NAND AA A 1 NAND A
1 0 0 1 1 0 0 1 0 1 1
1 1 1 0 0 1 1 0 1 1 0

NOR gate NOR gate cont.

This is a NOT-OR gate which is equal to
an OR gate followed by a NOT gate.
gate
The outputs of all NOR gates are false if
any of the inputs are true.
The symbol is an OR gate with a small
circle on the output. The small circle
represents inversion.
inversion

4
 EXOR gate EXNOR gate
The 'Exclusive-OR' gate is a circuit which The 'Exclusive-NOR' gate circuit does
will
ill give
i a true
t output
t t if either,
ith butb t nott th opposite
the it tto the
th EOR gate.
t
both, of its two inputs are true. It will give a false output if either, but
An encircled plus sign ( ) is used to show not both, of its two inputs are true.
the EOR operation. The symbol is an EXOR gate with a
small circle on the output.
output
The small circle represents inversion.

Logic gate symbols

EXNOR gate cont.

5
 Truth Table Try it
Logic gates representation using the Draw the circuit diagrams like the
T th ttable
Truth bl ones below
b l t show
to h how
h a NOR gatet
can be made into a NOT gate.

NOR Inverter Three Input AND Gate

Wiring the NOR gate to become an Here is an example of a three input
i
inverter
t AND gate.t
Notice that the truth table for the
three input gate is similar to the truth
table for the two input gate.
It works on the same principle,
principle this
time all three inputs need to be true
(1) to get a true output.

6
Three Input AND Gate Cont. Four Input AND Gate
Here is an example of a four input
AND gate.
t
It also works on the same principle,
all four inputs need to be true (1) to
get a true output.
The same principles apply to 5,
5 6 6,..., n
input gates.

Four Input AND Gate cont. Two, Three, and Four OR gates

7
 Connecting Gates
The output of one logic gate can be used
as the
th input
i t to
t another
th logic
l i gate.
t
The output of one gate can be used as the
inputs to several other gates.