Scribd
Upload
37 views

01 Basics

This document discusses polymer processing and the mechanical properties of materials. It covers two examples of polymer processing - dissolving a polymer and applying it as a thin film, and melting a polymer and shaping it. Three key ingredients for processing are then outlined: fluid mechanics, rheology, and processing equipment. The document goes on to define stress, strain, modulus, and viscosity for elastic solids, Newtonian liquids, polymer solids, and polymer liquids. It establishes the relationships between stress, strain, and other material properties for each state of matter.

Uploaded by

baominh007
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
37 views

01 Basics

This document discusses polymer processing and the mechanical properties of materials. It covers two examples of polymer processing - dissolving a polymer and applying it as a thin film, and melting a polymer and shaping it. Three key ingredients for processing are then outlined: fluid mechanics, rheology, and processing equipment. The document goes on to define stress, strain, modulus, and viscosity for elastic solids, Newtonian liquids, polymer solids, and polymer liquids. It establishes the relationships between stress, strain, and other material properties for each state of matter.

Uploaded by

baominh007
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

Polymer Processing

Example 1 Dissolve a polymer and apply it as a thin film on a substrate (coating)

Example 2 Melt a polymer and force it into a desired shape (molding)


Injection Molding

Both examples require three ingredients:

1. Fluid Mechanics - What rules govern fluid motion?

2. Rheology - Specific material properties.

3. Processing Equipment - Geometry, rate, pressure, etc.

1
Stress and Strain in Extension for Elastic
Solids

Stretch each from initial length `0 to final length `


F1 F2
= F A define stress e F/A (1)
A1 A2
Stretch same bar to different final lengths.

F `/`0 ` = ` `0 (2)
define extensional strain `/`0

Hookes Law for Elastic Solids:

e = Ge (3)
Ge is the extensional modulus

2
Stress and Strain in Shear for Hookean
(elastic) Solids

Force F applied over area A


F1 F2
= F A define shear stress s F/A (4)
A1 A2

`
F , define shear strain `/h (5)
h
Hookes Law in Shear:

s = Gs (6)
Gs is the shear modulus

Ge = 3Gs (7)
Modulus is a material property of a solid.

3
Mechanical Properties of Newtonian (viscous)
Liquids
Stress and strain are defined in the same ways for all materials.

Hookes Law does not hold for liquids.

Newtonian liquids have no shape memory.

Stress is not determined by strain.

Stress in a Newtonian liquid is proportional to the rate of strain.

Extension rate d/dt

Shear rate d/dt

Newtons Law for Viscous Liquids:

e = e s = s (8)
e = extensional viscosity

s = shear viscosity

Troutons Rule: e = 3s

Viscosity is a material property of a liquid.

4
Stress and Strain for a Polymer Solid

e ()
Apparent Modulus Ga ()

Generalization of the concept of a modulus to the regime of


non-linear response.

5
Stress and Strain for a Polymer Liquid

s ()
Apparent Viscosity a ()

Generalization of the concept of a viscosity to the regime of


non-linear response.

You might also like