Scribd
Upload
148 views

Coordinate System Transformation

This document defines rectangular, cylindrical, and spherical coordinate systems and describes transformations between them. It provides the unit vector definitions for each system and the dot products used to transform a vector between rectangular to cylindrical and rectangular to spherical coordinates. An example transforms a given vector and point between the three coordinate systems.

Uploaded by

Vievie Le Bluewberrietruffles
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
148 views

Coordinate System Transformation

This document defines rectangular, cylindrical, and spherical coordinate systems and describes transformations between them. It provides the unit vector definitions for each system and the dot products used to transform a vector between rectangular to cylindrical and rectangular to spherical coordinates. An example transforms a given vector and point between the three coordinate systems.

Uploaded by

Vievie Le Bluewberrietruffles
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 18

Coordinate and Unit Vector Definitions

Rectangular Coordinates (x,y,z)

Cylindrical Coordinates (D,N,z)

Spherical Coordinates (r,2,N)


Vector Definitions and Coordinate Transformations

Vector Definitions

Vector Magnitudes

Rectangular to Cylindrical Coordinate Transformation

(Ax, Ay, Az ) Y (AD, AN, Az )


The transformation of rectangular to cylindrical coordinates requires
that we find the components of the rectangular coordinate vector A in the
direction of the cylindrical coordinate unit vectors (using the dot product).
The required dot products are

where the az unit vector is identical in both orthogonal coordinate systems


such that

The four remaining unit vector dot products are determined according to
the geometry relationships between the two coordinate systems.

The resulting cylindrical coordinate vector is


In matrix form, the rectangular to cylindrical transformation is

Cylindrical to Rectangular Coordinate Transformation

(AD, AN, Az ) Y (Ax, Ay, Az )


The transformation from cylindrical to rectangular coordinates can
be determined as the inverse of the rectangular to cylindrical
transformation.

The cylindrical coordinate variables in the transformation matrix must be


expressed in terms of rectangular coordinates.
The resulting transformation is

The cylindrical to rectangular transformation can be written as

Rectangular to Spherical Coordinate Transformation

(Ax, Ay, Az ) Y (Ar, A2, AN )


The dot products necessary to determine the transformation from
rectangular coordinates to spherical coordinates are
The geometry relationships between the rectangular and spherical unit
vectors are illustrated below.

The dot products are then

and the rectangular to spherical transformation may be written as


Spherical to Rectangular Coordinate Transformation

(Ar, A2, AN ) Y (Ax, Ay, Az )


The spherical to rectangular coordinate transformation is the inverse
of the rectangular to spherical coordinate transformation so that

The spherical coordinate variables in terms of the rectangular coordinate


variables are
The complete spherical to rectangular coordinate transformation is
Coordinate Transformation Procedure

(1) Transform the component scalars into the new coordinate


system.
(2) Insert the component scalars into the coordinate transformation
matrix and evaluate.

Steps (1) and (2) can be performed in either order.

Example (Coordinate Transformations)

Given the rectangular coordinate vector

(a.) transform the vector A into cylindrical and spherical


coordinates.
(b.) transform the rectangular coordinate point P (1,3,5) into
cylindrical and spherical coordinates.
(c.) evaluate the vector A at P in rectangular, cylindrical and
spherical coordinates.

(a.)
(b.) P (1, 3, 5) Y x = 1, y = 3, z = 5

P (1, 3, 5) Y P (3.16, 71.6o, 5) Y P (5.92, 32.3o, 71.6 o)


(c.)
Separation Distances

Given a vector r1 locating the point P1 and a vector r2 locating the


point P2, the distance d between the points is found by determining the
magnitude of the vector pointing from P1 to P2, or vice versa.
Volumes, Surfaces and Lines in Rectangular,
Cylindrical and Spherical Coordinates

We may define particular three-dimensional volumes in rectangular,


cylindrical and spherical coordinates by specifying ranges for each of the
three coordinate variables.

Rectangular volume (225 box)

(1 # x # 3)
(2 # y # 4)
(0 # z # 5)

Cylindrical volume (cylinder of length = 5, diameter = 2)

(0 # D #1)
(0 # N # 2B)
(0 # z # 5)
Spherical volume (sphere of diameter = 4)

(0 # r # 2)
(0 # 2 # B)
(0 # N # 2B)

Specific lines and surfaces can be generated in a given coordinate


system according to which coordinate variable(s) is(are) held constant. A
surface results when one of the coordinate variables is held constant while
a line results when two of the coordinate variables are held constant.

Surface on the Rectangular volume (front face of the box)

x=3 (x ! constant)
(2 # y # 4)
(0 # z # 5)

Surface on the Cylindrical volume (upper surface of the cylinder)

(0 # D #1)
(0 # N # 2B)
z=5 (z ! constant)
Surface on the Spherical volume (outer surface of the sphere)

r=2 (r ! constant)
(0 # 2 # B)
(0 # N # 2B)

Line on the Rectangular volume (upper edge of the front face)

x=3 (x ! constant)
(2 # y # 4)
z=5 (z ! constant)

Line on the Cylindrical volume (outer edge of the upper surface)

D =1 (D ! constant)
(0 # N # 2B)
z=5 (z ! constant)

Line on the Spherical volume (equator of the sphere)

r=2 (r ! constant)
2 = B/2 (2 ! constant)
(0 # N # 2B)

You might also like