Scribd
Upload
174 views

Grey Code and Binary Code

Grey code and binary code are two types of digital codes used in absolute shaft encoders. Grey code has the characteristic that only one bit changes between codes, while binary code can have multiple bit changes. The table shows examples of binary and grey codes from 0 to 15, where the grey code ensures only a single bit change. Absolute shaft encoder resolution can be calculated using the number of bits and the equation shown, with more bits providing higher resolution.

Uploaded by

mica
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
174 views

Grey Code and Binary Code

Grey code and binary code are two types of digital codes used in absolute shaft encoders. Grey code has the characteristic that only one bit changes between codes, while binary code can have multiple bit changes. The table shows examples of binary and grey codes from 0 to 15, where the grey code ensures only a single bit change. Absolute shaft encoder resolution can be calculated using the number of bits and the equation shown, with more bits providing higher resolution.

Uploaded by

mica
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Grey Code and Binary Code

From the previous articles, you may have noticed the use of the grey code instead of
the binary code in absolute shaft encoders. This is another type of digital code. It has
the important characteristic that only one bit changes between one code and the next.
Binary code, on the other hand, can have a large number of changes between one code
and the next. See the table below for examples binary code and grey code for the codes
from 0 to 15 for a four bit code. As can be clearly seen in the binary code, when moving
from the number 7 to 8, all four bits change. However, at any change in the grey code
between one number and the next, only one bit changes.

Number Binary Grey


Code Code
0 0000 0000
1 0001 0001
2 0010 0011
3 0011 0010
4 0100 0110
5 0101 0111
6 0110 0101
7 0111 0100
8 1000 1100
9 1001 1101
10 1010 1111
11 1011 1110
12 1100 1010
13 1101 1011
14 1110 1001
15 1111 1000

Study the following rules for developing the grey code.

1. Start with a word that contains all zeros.


2. Go to the least significant bit and toggle it (i.e., change it from 0 to 1 or from 1 to
0).
3. If the resulting code has not been used before (i.e., is unique), then keep the
resulting code and proceed to the next.
4. Otherwise, if the code is not unique, then undo the change and move to the next
significant bit and toggle it.
5. Repeat the steps above until all codes have been generated.

The resolution of the absolute shaft encoder can be calculated as shown in the equation
shown below:

Saylor URL: www.saylor.org/me302/ Subunit 4.1

The Saylor Foundation Saylor.org


Page 1 of 2
360
, where:
2n

n is the number of bits used in the absolute shaft encoder, and


is the resolution of the shaft encoder in degrees.

For example, an absolute shaft encoder with 14 bits has an angular resolution of around
0.022 degrees.

Saylor URL: www.saylor.org/me302/ Subunit 4.1

The Saylor Foundation Saylor.org


Page 2 of 2

You might also like