Scribd
Upload
112 views

BPQ Sample

This document is a brazer/brazing operator performance qualification record from the Manitoba government. It contains sections for the brazer's name and identification number, the brazing process and variables qualified for including materials, joint types, filler metals, and positions. Test results are listed for visual examination and mechanical tests on brazed coupons including peel and tension tests. The brazing was supervised and mechanical tests conducted by company representatives, with specimens evaluated by another company. Signatures are provided to certify the tests were performed according to ASME code requirements.

Uploaded by

sudeep_singh1
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
112 views

BPQ Sample

This document is a brazer/brazing operator performance qualification record from the Manitoba government. It contains sections for the brazer's name and identification number, the brazing process and variables qualified for including materials, joint types, filler metals, and positions. Test results are listed for visual examination and mechanical tests on brazed coupons including peel and tension tests. The brazing was supervised and mechanical tests conducted by company representatives, with specimens evaluated by another company. Signatures are provided to certify the tests were performed according to ASME code requirements.

Uploaded by

sudeep_singh1
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Labour and Immigration www.gov.mb.

ca/labour/safety/mechanic
Mechanical and Engineering 500 401 York Avenue
Winnipeg, MB R3C 0P8
PH: (204) 945-3373
Fax: (204) 948-2309
Brazer/Brazing Operator Performance Qualifications (BPQ)
(See QB-301, Section IX, ASME Boiler and Pressure Vessel Code)

Brazers/Operators Name: _____________________________ Identification No.______________________

Testing Conditions and Ranges Qualified

Identification of BPS followed during brazing of test coupon: _____________________________________________


Specification of First Test Coupon Base Metal: _______________________________________________________
Specification of Second Test Coupon Base Metal: _____________________________________________________

Brazing Variables (QW-361.2) Actual Values Range Qualified


Brazing Process(es): _______________ _______________
Type of Brazing (manual, semi-automatic, automatic): _______________ _______________
Base Metal P- or S- Number _____ to P- or S-Number _______________ _______________
Plate Pipe (enter diameter if pipe or tube): _______________ _______________
First Base Metal thickness (in.): _______________ _______________
Second Base Metal thickness (in.): _______________ _______________
Joint Type (Butt, Lap, Scarf, Socket, etc.) : _______________ _______________
If Lap or Socket, Overlap Length (in.): _______________ _______________
Joint Clearance (in.): _______________ _______________
Filler Metal (SFA) Specification(s) (info only): _______________ _______________
Filler Metal Classification(s) (info only): _______________ _______________
Filler Metal/F-Number: _______________ _______________
Filler Metal Product Form: _______________ _______________
First Brazing Position: _______________ _______________
Second Brazing Position: _______________ _______________

Testing and Results

Visual Examination of Completed Joint: ______________________________ Date of Test: ________________

Mechanical Test Peel (QB-462.3) Section (QB-462.4) Tension [QB-462.1(e)]

Position Result Position Result Position Result

Brazing Supervised by: _____________________________________ Company:___________________________


Mechanical Tests Conducted by: ______________________________ Company:___________________________
Specimens Evaluated by: ____________________________________ Company:___________________________
Lab Test No.: _____________________________________________

We certify that the statements in this record are correct and that the test coupons were prepared, brazed, and tested
in accordance with the requirements of Section IX of the ASME Boiler and Pressure Vessel Code.

Company Name: _______________________________________________________________________________

By: _____________________________________________________ Date: _______________________________

You might also like