Scribd
Upload
1K views

ARSP Setup

This document provides instructions for setting up ARSP operation on a device. It involves 4 steps: 1) Connecting to the internet, 2) Configuring the LAN settings, 3) Port forwarding on the router, and 4) Configuring ARSP settings on the device. Key steps include checking the network connection, setting the device's IP address, port numbers, and DNS settings, opening ports on the router, and enabling ARSP to allow remote access using the device's serial number.

Uploaded by

sabrijamous
Copyright
© © All Rights Reserved
Available Formats
Download as PPS, PDF, TXT or read online on Scribd
1K views

ARSP Setup

This document provides instructions for setting up ARSP operation on a device. It involves 4 steps: 1) Connecting to the internet, 2) Configuring the LAN settings, 3) Port forwarding on the router, and 4) Configuring ARSP settings on the device. Key steps include checking the network connection, setting the device's IP address, port numbers, and DNS settings, opening ports on the router, and enabling ARSP to allow remote access using the device's serial number.

Uploaded by

sabrijamous
Copyright
© © All Rights Reserved
Available Formats
Download as PPS, PDF, TXT or read online on Scribd
You are on page 1/ 12

ARSP Operation Instruction

Step 1,Connect into internet

Step 2,LAN

Step 3,Port forward

Step 4,ARSP setup


Step 1,Connect into interne
t
Connect internet cable

Check netcard light if


one is light and the ot
her is flashing

Another way to check ne


twork,in your PC, go to
Start->Run->cmd, then p
ing ip address,for exam
ple 192.168.1.10,see pi
c at the right
Step 2,LAN setup
(1) IP address,set it as ref
erence of your router,but di
fferent with other DVR

(2) Set primary DNS and seco


ndary DNS,you can find it in
your PC if the dvr is in the
same LAN as DVR(Start->Run->
cmd->ipconfig/all)

(3) TCP port and HTTP port,y


ou can set it as any value

Note: default setting as p


icture at the right
Setup, LAN setup
After network configuration,then use IE to visit the device
if it's set successfully,see below picture:
Step 3, Port forward

Open your router,go into Port forward,see below Picture


Step 3, Port Forward
Add new option for tcp,http and mobile port of DVR
Step 3, Port Forward
Input the dvr external ip address in IE,see below picture
Step 4, ARSP setup

1,Go to MainMenu->
System->NetServic
e->ARSP

2,Select "Enable"

3, Server IP: xmse


cu.com

4, Port, User name


and password are d
efault
Step 4, ARSP setup

When DNS is set over,go to M


ainMenu->Info->Version to fin
d SerialNo

Each device has only 1 serial


number, so with with serial nu
mber, you can go to visit your
device by another way

Also you can find Serial Numb


er in MainMenu->System->Ne
twork(the same as MAC addr
ess)
Step 4, ARSP setup
After set ARSP,open http://xmsecu.com:8080/ with the serial number( eg. 000
b3d00943a),then choose "log in by device",see below picture
Step 4, ARSP setup
Now you can find your device as below picture
Step 4, ARSP setup
This is the remote monitor screen of your device,just through by serial number

You might also like