SECTION 6: Cable Ladder Covers
Flat Cover Tee Flat Cover Bend Flat Cover
> 6:2 > 6:3 > 6:3
Cross Flat Cover Risers Flat Cover Reducers Flat Cover
> 6:3 > 6:4 > 6:4
Peak Cover Tee Peak Cover Bend Peak Cover
CABLE LADDER
COVERS
> 6:5 > 6:6 > 6:6
Cross Peak Cover Risers Peak Cover Reducers Peak Cover
> 6:6 > 6:7 > 6:7
E.&O.E.
www.kounis.com.au Page 6:1
Cable Ladder Flat & Peak Covers
General Description
The Kounis Metal Industries Cable Ladder Cover range was developed to
suit all installations that require physical and ultraviolet protection from the
surrounding environment.
The finished product is constructed from a variety of material thicknesses
ranging from; Light Duty 0.6 mm, Medium Duty 1.2 mm and Heavy Duty
1.6 mm and finishes to suit any application or environment; Galvabond, Mild
Steel Hot Dip Galvanised, 316 Grade Stainless Steel and Aluminium. All
of which offer the following standard features and options:
3 m length
Option of hook bolt or snug t metal tek screw attachment
Option of Flat or 30 peak
Also available in 15 and 45 peak made to order
Option of ventilation louvers
A full range of tting covers at or peaked
Engineer certication to withstand cyclonic area importance level
2 wind terrain category 1 conditions (Covers are recommended
to be1.6 mm thick Hot Dip Galvanised and minimum installation
requirements apply see below table)
MINIMUM NUMBER OF HOOK BOLT ATTACHMENTS
COVER WIDTH W
PER STRAIGHT COVER
150 & 300 mm wide 6
450 & 600 mm wide 8
CABLE LADDER
COVERS
Cable Ladder Flat & Peak
General Description
Covers
E.&O.E.
Page 6:2 www.kounis.com.au
Cable Ladder Flat Covers
Flat Cover Hook Bolt Fixing
Hook Bolt Details
Material Stainless Steel C/W
Nylock Nut and Washer
Rail In
30.0
D
C 15.0
Code LADDER DIM C DIM D Rail Out
3CHB 3/50 125 25
4CHB 4/70 155 35
5CHB 5/112 170 35
Flat Cover Snug Fit Fixing
CABLE LADDER
COVERS
Rail In
Cable Ladder Flat Covers
Optional snug fit with self tapping screws
Flat cover lengths can be supplied with ventilation louvres to order.
When Ordering
Range Type Size Material Thickness Finish Rail Direction
2 FC 15 L G RI
2 = 2/30 FC = Flat Cover 15 = 150 mm L = 0.6 mm G = Galvabond RI = Rail In
3 = 3/50 FCV = Flat Cover Vented Louvers 30 = 300 mm M = 1.2 mm H = Hot Dip Galv RO = Rail Out
4 = 4/70 45 = 450 mm H = 1.6 mm S = 316 Stainless Steel
5 = 5/112 60 = 600 mm A = Aluminium
75 = 750 mm P = Painted
90 = 900 mm
Ordering example shown 2/30 Cable Ladder Flat Cover 150 mm Wide Light Duty Galvabond Rail In
E.&O.E.
www.kounis.com.au Page 6:3
Cable Ladder Flat Cover Fittings
Tee Cover
W3
NOTE: Equal or unequal Tees can be supplied.
When ordering state widths W1 x W2 x W3
W1 W2
Radius
Bend Cover Cross Cover
W4 W3
CABLE LADDER
COVERS
Radius
W1 W2
Radius
W
Tee, Bend & Cross
Flat Covers
NOTE: Equal or unequal crosses can be supplied. When ordering
state widths W1 x W2 x W3 x W4
When Ordering
Range Type Fitting Type Size Material Thickness Finish Rail Direction Radius
2 FC T 15 L G RI 3
2 = 2/30 FC = Flat Cover T = Tee 15 = 150 mm L = 0.6 mm G = Galvabond RI = Rail In 3 = 300 mm
3 = 3/50 B = Bend 30 = 300 mm M = 1.2 mm H = Hot Dip Galv RO = Rail Out 4 = 450 mm
4 = 4/70 C = Cross 45 = 450 mm H = 1.6 mm S = 316 Stainless 6 = 600 mm
5 = 5/112 60 = 600 mm Steel 9 = 900 mm
75 = 750 mm A = Aluminium
90 = 900 mm P = Painted
Ordering example shown 2/30 Flat Cover Tee 150 mm Wide Light Galvabond Rail In 300 mm radius
E.&O.E.
Page 6:4 www.kounis.com.au
Cable Ladder Flat Cover Fittings
External Riser Cover Internal Riser Cover
Radius
Radius
When Ordering
Range Type Fitting Type Size Material Thickness Finish Rail Direction Radius
2 FC RX 15 L G RO 3
2 = 2/30 FC = Flat RX = External Riser
15 = 150 mm L = 0.6 mm G = Galvabond RI = Rail In 3 = 300 mm
3 = 3/50 Cover RI = Internal Riser
30 = 300 mm M = 1.2 mm H = Hot Dip Galv RO = Rail Out 4 = 450 mm
4 = 4/70 45 = 450 mm H = 1.6 mm S = 316 Stainless 6 = 600 mm
5 = 5/112 60 = 600 mm Steel
75 = 750 mm A = Aluminium
90 = 900 mm P = Painted
Ordering example shown 2/30 Cable Ladder Flat External Riser Cover 150 mm Wide Light Duty Galvabond Rail Out 300 mm Radius
Straight Reducer Cover Offset Reducer Cover
W2
W2
CABLE LADDER
W1
W1
W2
LEFT HAND COVERS
Offset & Straight Reducers
External/Internal Risers,
Flat Covers
W1
NOTE: When ordering state widths W1 x W2 RIGHT HAND
When Ordering
Range Type Fitting Type Size Material Thickness Finish Rail Direction Radius
2 FC SR 3015 L G RO 3
2 = 2/30 FC = Flat SR = Straight 3015 = 300 to 150mm L = 0.6 mm G = Galvabond RI = Rail In
3 = 3/50 Cover Reducer 4530 = 450 to 300mm M = 1.2 mm H = Hot Dip Galv RO = Rail Out
4 = 4/70 FCV = LR = Left 6045 = 600 to 450mm H = 1.6 mm S = 316 Stainless
5 = 5/112 Flat Cover Reducer 7560 = 750 to 600mm Steel
Vented RR = Right 9075 = 900 to 750mm A = Aluminium
Louvers Reducer P = Painted
Ordering example shown 2/30 Cable Ladder Flat Straight Reducer Cover 300 to 150 mm Wide Light Duty Galvabond Rail Out 300 mm Radius
E.&O.E.
www.kounis.com.au Page 6:5
Cable Ladder Peaked Covers
Peaked Cover Hook Bolt Fixing
Hook Bolt Details
Material Stainless Steel C/W
Nylock Nut and Washer
30.0 Rail Out
D
C 15.0
Code LADDER DIM C DIM D
3CHB 3/50 125 25
4CHB 4/70 155 35
5CHB 5/112 170 35
Rail In
Peaked Cover Snug Fit Fixing
CABLE LADDER
COVERS
Rail In
Peak Covers
Optional snug fit with self tapping screws
When Ordering
Range Type Size Material Thickness Finish Rail Direction
2 PC 15 L G RO
2 = 2/30 PC = Peak Cover 15 = 150 mm L = 0.6 mm G = Galvabond RI = Rail In
3 = 3/50 PCV = Peak Cover Vented Louvers 30 = 300 mm M = 1.2 mm H = Hot Dip Galv RO = Rail Out
4 = 4/70 45 = 450 mm H = 1.6 mm S = 316 Stainless Steel
5 = 5/112 60 = 600 mm A = Aluminium
75 = 750 mm P = Painted
90 = 900 mm
Ordering example shown 2/30 Cable Ladder Peak Cover 150 mm Wide Light Duty Galvabond Rail Out
E.&O.E.
Page 6:6 www.kounis.com.au
Cable Ladder Peak Cover Fittings
Tee Cover
NOTE: Equal or unequal tees can be supplied.
W3
When ordering state widths W1 x W2 x W3
Radius
W1
W2
Bend Cover Cross Cover
W4 W3
Radius
CABLE LADDER
COVERS
W1 W2
Radius
W
100 100
Tee, Bend & Cross
NOTE: Equal or unequal crosses can be supplied. When ordering
Peak Covers
state widths W1 x W2 x W3 x W4
When Ordering
Range Type Fitting TypeSize Material Thickness Finish Rail Direction Radius
2 PC T 15 L G RI 3
2 = 2/30 PC = Peak Cover T = Tee 15 = 150 mm L = 0.6 mm G = Galvabond RI = Rail In 3 = 300 mm
3 = 3/50 B = Bend 30 = 300 mm M = 1.2 mm H = Hot Dip Galv RO = Rail Out 4 = 450 mm
4 = 4/70 C = Cross 45 = 450 mm H = 1.6 mm S = 316 Stainless 6 = 600 mm
5 = 5/112 60 = 600 mm Steel 9 = 900 mm
75 = 750 mm A = Aluminium
90 = 900 mm P = Painted
Ordering example shown 2/30 Cable Ladder Peak Tee Cover 150 mm Wide Light Duty Galvabond Rail In 300 mm Radius
E.&O.E.
www.kounis.com.au Page 6:7
Cable Ladder Peak Cover Fittings
External Riser Cover Internal Riser Cover
Radius
Radius
Peak Cover End Cap
When Ordering
Range Type Fitting Type Size Material Thickness Finish Rail Direction Radius
2 PC RX 15 L G RI 3
2 = 2/30 PC = Peak RX = External 15 = 150 mm L = 0.6 mm G = Galvabond RI = Rail In 3 = 300 mm
3 = 3/50 Cover Riser 30 = 300 mm M = 1.2 mm H = Hot Dip Galv RO = Rail Out 4 = 450 mm
4 = 4/70 RI = Internal 45 = 450 mm H = 1.6 mm S = 316 Stainless 6 = 600 mm
5 = 5/112 Riser 60 = 600 mm Steel
E = End Cap 75 = 750 mm A = Aluminium
90 = 900 mm P = Painted
Ordering example shown 2/30 Cable Ladder Peak External Riser Cover 150 mm Wide Light Duty Galvabond Rail In 300 mm radius
Offset Reducer Cover
W2
W2
CABLE LADDER
COVERS
W1
W1
LEFT HAND W2 RIGHT HAND
Offset & Straight Reducers
External/Internal Risers,
W1 STRAIGHT
Peak Covers
When Ordering
Range Type Fitting Type Size Material Thickness
Finish Rail Direction
2 PC SR 3015 L G RI
2 = 2/30 PC = Peak SR = Straight Reducer 3015 = 300 to 150 mm L = 0.6 mm G = Galvabond RI = Rail In
3 = 3/50 Cover LR = Left Reducer 4530 = 450 to 300 mm M = 1.2 mm H = Hot Dip Galv RO = Rail Out
4 = 4/70 RR = Right Reducer 6045 = 600 to 450 mm H = 1.6 mm S = 316 Stainless
5 = 5/112 7560 = 750 to 600 mm Steel
9075 = 900 to 750 mm A = Aluminium
P = Painted
Ordering example shown 2/30 Cable Ladder Peak Straight Reducer Cover 300 to 150 mm Wide Light Duty Galvabond
E.&O.E.
Page 6:8 www.kounis.com.au
