Content

1. Introduction to Hypermesh

2. Tool Bar and Menu Bar

3. Open and save the file

4. FEA (Finite Element Analysis)

5. Strategic Planning

6. The Art of Modeling

7. Analysis Types

8. Basic interaction with HyperMesh

9. Shell meshing

10. Preparing models for analysis

11. Preparing geometry for meshing

12. Creating hexa and penta mesh

13. Tetra meshing

14. Assemblies: welding and swapping parts

15. Topology& Topography

16. Size and shape optimization concepts

17. Pre-processing using HyperMesh

18. Linear static and normal mode anlysis

19. Results visualization with HyperMesh

20. Topology optimization

21. Manufacturing constraints

22. Combined Topology and Topography optimization

23. Geometric Data Generation

24. Shape Generation HyperMesh

 25. 2D and 3D shape optimization

26. 1D and 2D size optimization

27. Model clean up

28. Meshing

29. Static analysis

30. Thermal analysis

31. Optimization

1 .Introduction to Hypermesh
2 .Tool Bar and Menu Bar
3. Open and save the file
4. FEA (Finite Element Analysis)
5. Strategic Planning
Planning the Solution

Creating a Solution Checklist

Boundary Conditions and Load Cases

Linear Assumption

6. The Art of Modeling

Consistent Units

Understanding Element Behavior

Element Selection

Mesh Density and Solution Convergence

Compatibility and Mechanisms

Rigid Elements
 Fasteners

7. Analysis Types
Static Analysis

Stress Results

Dynamics

Buckling

Presentation of Results

8. Basic interaction with HyperMesh

9. Shell meshing
Automeshing meshing on surface geometry

Checking and editing mesh

Batch meshing

10. Preparing models for analysis

Creating boundary conditions

Formatting for solvers

11. Preparing geometry for meshing

Repairing surface topology

Midsurfaces

Defeaturing models

Refining surface topology

12. Creating hexa and penta mesh

Creating & editing solid geometry

Creating hex mesh with the solid map panel

13. Tetra meshing
14. Assemblies: welding and swapping parts
15. Topology& Topography
16. Size and shape optimization concepts
17. Pre-processing using HyperMesh
18. Linear static and normal mode analysis
19. Results visualization with HyperMesh
20. Topology optimization
21. Manufacturing constraints
22. Combined Topology and Topography optimization
23. Geometric Data Generation
24. Shape Generation HyperMesh
25. 2D and 3D shape optimization
26. 1D and 2D size optimization
27. Model clean up
28. Meshing
29. Static analysis
30. Thermal analysis
31. Optimization
HyperMesh/HyperView Introduction - Altair Hyperworks US Content

Pre-Processing for Finite Element Analysis

Includes an Introduction to HyperView

This is an introductory course for using HyperMesh to create and set up finite element
models for analysis. A combination of lectures and exercises will familiarize students to the
HyperMesh environment, process, and suite of tools needed to start using HyperMesh in their
work. This course is combined with the HyperView Introduction course on the final day
as a training package.

Course Format

3 day (4 days in Troy, MI)

Instructor led

Presentation and hands-on exercises, one student to a computer

Prerequisites

A basic knowledge of finite element analysis (recommended).

Topics

Basic interaction with HyperMesh

o User interface

o Opening/saving files

o Working with panels

o Model organization

o Display control

Shell meshing

o Automeshing meshing on surface geometry

 o Checking and editing mesh

o Batch meshing

Preparing models for analysis

o Creating boundary conditions

o Formatting for solvers

Preparing geometry for meshing

o Repairing surface topology

o Midsurfaces

o Defeaturing models

o Refining surface topology

Creating hexa and penta mesh

o Creating & editing solid geometry

o Creating hex mesh with the solid map panel

Tetra meshing

o Method 1 standard tetramesh

o Method 2 volume tetramesh

o Method 3 quick tetramesh

Assemblies: welding and swapping parts

o Spot connectors

o Area conectors

o Bolt connectors

o Part replacement

Optistruct

Topics

Topology topography, size and shape optimization concepts

 Pre-processing for OptiStruct using HyperMesh

Linear static and natural frequency analysis with OptiStruct prior to optimization

Results visualization with HyperMesh and Altair HyperView

Topology optimization with manufacturing constraints

Combined topology and topography optimization

Geometric data generation of new design concept using OSSmooth which is part of
OptiStruct

Shape generation using HyperMorph which is a part of HyperMesh

2D and 3D shape optimization

1D and 2D size optimization

Professional Training Centres are Private Training Centres for Altair HyperWorks. All
trainings conducted at professional training centres use legal Altair Software. The programs
and curriculums are custom made by the individual institutes based on their areas of
expertise. These centres undertake both onsite and offsite training programs for working
professionals.

The popularity and market demand for Altair HyperWorks CAE / CFD solutions has
resulted in increase in the number of Private Training Centres.

To ensure quality of training on updated Altair HyperWorks products, please check with us to
verify if the training centre is using legal licenses of Altair products by emailing us
at [email protected]

Altair India invites interested entrepreneurs to start HyperWorks based CAE / CFD Training
Centres.

The following is a list of the current HyperWorks Professional Training Centres:

ATOMMECH AANCAE Technologies

#4170/8. 3rd Main Road, 9th Cross No. 82, 1st Floor, Church Road
B Block, Subraamanyanagar Near Hebbal outer Ring Road
Bangalore - 560 021 Veerannapalya, AC Post Bangalore 560 045
W: www.atommech.com Ph: +91 7829117776
E: [email protected]
W: www.aantechnologies.in
Valid: Mar 05, 2016 - Mar, 04, 2017 E: [email protected]
Valid: Apr 18, 2016 - Apr 17, 2017

Copes Tech India Pvt. Ltd CADCAMGURU

#8, 2nd Floor, Chingari Complex Training Centres at Karve Road

Maruthi Nagar RMV 2nd Stage Hadapsar & Chinchwad Florina Apartments
Hebbal BEL Ring Road Bangalore 560 094 Erandwane, Opp. SNDT College, Pune
Tel: 080-23413032 | +91 9980021032 Tel: 020 - 25469637/25433529/78756 40359

W: www.copes-tech.com W: cadcamguru.com
E: [email protected] E: [email protected]
Valid: June 05, 2017 - June 04, 2018 Valid: Jan 01, 2017 - Dec 31, 2017

CADmaxx Solutions CAE Centre

# 2953/E, 3rd Floor, Opp Maruthi Mandir No 17B/8B Grace Garden

Vijaynagar Service Road, Vijaynagar 5th Lane Royapuram Chennai - 600013
Bangalore 560 040 KA
Cell: 9884366606
W: cadmaxx.com W: www.caecentre.com
E: [email protected] Valid: Jan 09, 2017 - Jan 08, 2018
Valid: Dec 29, 2016 - Dec 28, 2017

Eleno Engineering Learning Centre Finite to Infinite

1412/c, Kasba Peth, Nishant Apartment 686 Budhwar Peth, III Floor
Opposite Shaniwarwada Pune 411 011 Shivganga Chambers Near Prabhat Talkies
Tel: 020-24579553 / +91 9881732144 Pune 411002
Tel: 020 2445 4981
W: eleno-elc.com
E: [email protected] W: finitetoinfinite.com E: [email protected]
Valid: Apr 15, 2016 - Apr 17, 2017 Valid: Jan 01, 2017 - Dec, 31 2017

Helix Integrated Learning LLP IICAE

Office No. 6, 1st Floor, Plot No. 44 Indore Institute of Computer Aided Engg
Lokmanya House, Near Kothrud Police Station 4th Floor Madhur View Opp Bridge
Paud Road, Pune 411 038 Stone Showroom Tower Square,
Mobile: 9766539307 INDORE Ph: +91 78693 45669

W: www.helixil.in E: [email protected] Web: iicae.in | E: [email protected]

Valid: Jan 01, 2017 - Dec 31, 2017
Valid: Sep 01, 2016 - Aug 31, 2017
IKSC Knowledge Bridge Pvt. Ltd Lavender Technologies & Solutions

PADMAPANI 22, Yashashree Society 1865, 2nd Flr, Shubam Complex, Trichy road
1st Floor Old MIT Road Near Door Darshan Kendra Ramanathapuram, Coimbatore - 45
Paud Road, Kothrud, Pune 411 038 Tel: +91 9659372610 | 0422-6577339

W: kbridge.in W: lavendertech.in
E: [email protected] E: [email protected]
Valid: Nov 10, 2016 - Nov 09, 2017 Valid: Jan 01, 2017 - Dec 31, 2017

Mach Engineers Nova-Global Technosoft Pvt Ltd

79/57A, Ground Floor, 7th Cross Street #16, 80ft road, KHB Colony
Anna Nagar, Peelamedu Coimbatore 641 004 Basaweshwara Nagar
Tel: 0422 4223816 | +91 97909 05816 Bangalore 560079
M: +91-9379154654
W: www.machengineers.com
E: [email protected] W: www.nova-global.in
E:
Valid: Oct 07, 2016 - Oct 06, 2018 Valid: July 13, 2017 - July 12, 2018

P3 Consulting Engineering Pvt. Ltd STREBEN Engineering Solutions

Xylem, 5A, 5th Floor B#1, Lakshmi Plaza Ramamurthynagar Main Road
#4 & 4A, Dyavasandra Industrial Area Phase-I Opp. UCO Bank Bangalore 560016
Whitefield Road Bangalore 560 048 Mobile: +91 9035068894
[email protected]
W: www.p3-group.com W: www.strebenes.com
E: [email protected]
Valid: Oct 21, 2016 - Oct 20, 2017
Valid: Sep 01, 2016 - Aug 31, 2017

Vernalis Academy Zuti Engineering Solutions

11A, Shakthi Nagar Mount Poonamallee Road 203 Pavani Annexe Road No. 2
Porur Chennai, 600 116 Banjara Hills Hyderabad - 500 034
Tel: +91 44 3020 6800 Telangana.

W : vernalisacademy.com Tel: +91 40 2354 6019 | F: +91 40 2354 7901

E: [email protected]
Valid: Jan 01, 2017 - Dec 31, 2017 W: zuti.com | E: [email protected]
Valid: Jan 01, 2017 - Dec 31, 2017