Scribd
Upload
2K views1 page

EUI Unit Injector Adjustment

The document provides instructions for adjusting the valves and injectors on a Series 60 Detroit diesel engine with a DDEC II-IV engine control system. It notes that the valve lash and indications of needing adjustment should be verified first. It asks what tools are required for the engine type and explains that when setting up the injector, the injector pintle height is being adjusted. It also asks the reader to identify the slave and master pistons of the compression brake and states that the compression brake should only be adjusted during a valve adjustment procedure. A warning is given to never adjust the valves and injector of the same cylinder at the same time to avoid engine damage.

Uploaded by

Pedro Aparicio
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
2K views1 page

EUI Unit Injector Adjustment

The document provides instructions for adjusting the valves and injectors on a Series 60 Detroit diesel engine with a DDEC II-IV engine control system. It notes that the valve lash and indications of needing adjustment should be verified first. It asks what tools are required for the engine type and explains that when setting up the injector, the injector pintle height is being adjusted. It also asks the reader to identify the slave and master pistons of the compression brake and states that the compression brake should only be adjusted during a valve adjustment procedure. A warning is given to never adjust the valves and injector of the same cylinder at the same time to avoid engine damage.

Uploaded by

Pedro Aparicio
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

EUI Unit Injector Adjustment

Series 60 Detoit (DDEC II IV)

Name _______________________

Date ________________________

1. Verify the valve lash adjustment. Specifications: Intake_________ Exhaust__________

2, What are the indications that an engine requires a valve adjustment?

Adjust the valves & injectors.

What height of tools is required for this engine? ____________________________________

Essentially, on any unit injector what is being adjusted when setting-up the injector?
_______________________________________________________________________

Identify the slave piston and master piston of compression brake.

During the course of a valve set procedure, when is the compression brake adjusted?
___________________________________________________________________________

Never set the valves and injector of the same cylinder at the same time in a
Detroit 50 or 60 series. Doing this will result in engine damage.

You might also like