H.P.

TECHNICAL UNIVERSITY
HAMIRPUR (HP)

Syllabus
[Effective from the Session: 2015-16]
B. Tech. (1st & 2nd Semesters)
(Common for all B.Tech Branches)
 SEMESTER I (COMMON FOR ALL BRANCHES)

S. N. Category Paper Subject L T P/D Credits Evaluation Scheme (Marks)

Code
Internal Assesment ESE Subject
Total
CT IA Total

Theory:
1 BSM HS-101 English Communication Skills 2 - - 2 20 20 40 60 100
2 BSM MA-101 Engineering Math I 3 1 - 4 20 20 40 60 100
3 BSM PH-101/ Engineering Physics/ 3 1 - 4 20 20 40 60 100
CH -101 Engineering Chemistry
4 EF ME-101/ Engineering Mechanics/ 3 1 - 4 20 20 40 60 100
EE -101 Principles of Electrical Engg.
5 TA CS -101/ Introduction to Computer 3 1 - 4 20 20 40 60 100
EC -101 Fundamentals and
Programming in C++/
Fundamentals of Electronics
Engg.
6 TA ME-102/ Engineering Drawing & 1 - 3 3 20 40 60 40 100
ME -103 Graphics/
Workshop Technology
7 AC HS-102/ Environment & Ecology/ 3 - - - 20 20 40 60 100
HS- 103 Disaster Mangement
Labs: FW LP Total ESVE Sub.
Total
1 BSM/ HS -111/ Communication Lab - - 2 1 10 20 30 20 50
EF EE- 111 /Electrical Engg. Lab
2 BSM PH-111/ Applied Physics Lab/ - - 2 1 10 20 30 20 50
CH-111 Applied Chemisty Lab
3 EF CS -111/ Computer Programming - - 2 1 10 20 30 20 50
EC- 111 Lab/Electronics Engg. Lab
Total 18 4 09 24

Legend: L- Lecture ESE - End Semester Examination

T- Tutorial FW - Documentation/ File work and presentation
P- Practical LP - Lab performance
CT - Class Test ESVE - End Semester Exam./ viva-voce Exam.
IA - Internal Assessment

Note: Group A:
Brances: Civil Engg., Inf. Technology, Computer Science & Engg. and Electronics & Comm. Engg.
Subjects: HS-101, MA-101, PH-101, ME-101, CS-101, ME-102, HS-102, HS- 111, PH-111, CS-111

Group B:
Branches: Mech. Engg., Automobile, Textile, Electrical Engg and Electrical and Electronics Engg.
Subjects HS-101, MA-101, CH-101, EE-101, EC-101, ME-103, HS-103, EE- 111, CH-111, EC-111
 SEMESTER II (COMMON FOR ALL BRANCHES)

S. N. Category Paper Subject L T P/D Credits Evaluation Scheme (Marks)

Code Internal Assesment ESE Subject
Total
CT TA Total

Theory:
1 BSM HS -204 Business Communication 2 - - 2 20 20 40 60 100
2 BSM MA -202 Engineering Math II 3 1 - 4 20 20 40 60 100
3 BSM CH-101/ Engineering Chemistry/ 3 1 - 4 20 20 40 60 100
PH-101 Engineering Physics
4 EF EE -101/ Principles of Electrical Engg. 3 1 - 4 20 20 40 60 100
ME-101 /Engineering Mechanics

5 EF EC -101/ Fundamentals of Electronics 3 1 - 4 20 20 40 60 100

CS -101 Engg./ Introduction to
Computer Fundamentals and
Programming in C++
6 TA ME-103/ Workshop Technology/ 1 - 3 3 20 40 60 40 100
ME-102 Engineering Drawing &
Graphics
7 AC HS-103/ Disaster Mangement / 3 - - - 20 20 40 60 100
HS- 102 Environment & Ecology
Labs: FW LP Total ESVE Sub.
Total
1 EC/ EE- 111/ Electrical Engg. Lab/ - - 2 1 10 20 30 20 50
BSM HS -111/ Communication Lab
2 BSM CH-111/ Engineering Chemistry Lab/ - - 2 1 10 20 30 20 50
PH -111 Engineering Physics Lab
3 EF EC -111/ Electronics Engg. Lab/ Computer - - 2 1 10 20 30 20 50
CS- 111 Programming Lab
Totlal 18 4 09 24

Legend: L- Lecture ESE - End Semester Examination

T- Tutorial FW - Documentation/ File work and presentation
P- Practical LP - Lab performance
CT - Class Test ESVE - End Semester Exam./ viva-voce Exam.
IA - Internal Assessment

Note: Group A:
Brances: Civil Engg., Inf. Technology, Computer Science & Engg. and Electronics & Comm. Engg.
Subjects HS-204, MA-202, CH-101, EE-101, EC-101, ME-103, HS-103, EE- 111, CH-111, EC-111

Group B:
Branches: Mech. Engg., Automobile, Textile, Electrical Engg and Electrical and Electronics Engg.
Subjects: HS-204, MA-202, PH-101, ME-101, CS-101, ME-102, HS-102, HS- 111, PH-111, CS-111
SYLLABUS/ COURSE CONTENTS
 HS-101 ENGLISH COMMUNICATION SKILLS

L T P Credits Sessional: 40 Marks

2 0 0 2 Exam: 60 Marks
Total: 100 Marks
Duration of exam: 3 Hrs

Note: The paper setter will set two questions from each Section/Unit and one question (Q. No. 9)
covering all Sections/Units which is compulsory and of short answer type of one mark each. A
candidate is required to attempt 5 questions selecting one question from each section. All
questions carry equal marks.

Unit-I
Communication: Need for effective communication, process of communication, The Seven Cs of
Effective Communication - Completeness, Conciseness, Consideration, Concreteness,
Clarity, Courtesy, Correctness; Barriers to communication - miscommunication, physical noise;
Overcoming measures.

Unit-II
Essentials of Gramar: Sentence structure; Sentence formation, Use of appropriate diction, Tenses, articles
and prepositions; English Phonetics: International phonetic alphabets - Production of sounds,
Classification of consonant and vowel sounds.

Unit-III
Writing Skills: Letter writing - Formal, informal and demi-official letters; Business letters - quotations,
supply orders, complaints, sales, adjustment letters, etc.; Resume writing: Difference between bio-data,
CV and resume, Cover letter, Application for job.

Unit-IV
Soft skills: Classification of soft skills, soft skills for personality development & career growth;
Capturing audience, Tone, Behavior and telephone etiquette - Good practice when making and receiving
a call; Becoming a good leader and team-player, Personal SWOT analysis.

Text Books:
1. Herta A. Murphy, et al., Effective Business Communication, Tata Mc-Graw Hill: New Delhi
2. Krishna Mohan and Meenakshi Raman, Effective English Communication, TMH
3. B. K. Mitra, Personality and Soft Skills, Oxford press.

Reference Books:
1. R.W. Lesikar and John.D. Pettit, Business Communication: Theory and Application, All India
Traveller Bookseller.
2. Francis Soundaraj, Speaking and Writing for Effective Business Communication, Macmillan.
3. Ronald B. Adler and George Rodman, Understanding Human Communication, Oxford
University Press: New York.
 MA-101 ENGINEERING MATHEMATICS - I
L T P Credits Sessional: 40 Marks
3 1 0 4 Exam: 60 Marks
Total: 100 Marks
Duration of exam: 3 Hrs

Note: The paper setter will set two questions from each Section/Unit and one question (Q. No. 9)
covering all Sections/Units which is compulsory and of short answer type of one mark each. A
candidate is required to attempt 5 questions selecting one question from each section. All
questions carry equal marks.

UNIT I
Linear Algebra: Review of Matrices; Linearly dependent / independent of vectors; Rank and Matrix
Inverse; Linear Transformation & Matrix Representation; System of Linear Equations, Eigenvalues and
Eigenvectors; properties of Eigenvalues, Diagonalization of Matrices; Jordan Canonical Form, Cayley
Hamilton Theorem.

UNIT II
Complex Numbers: Roots of complex number, Real and imaginary parts of functions of a complex
variables - Exponential, Circular, Hyperbolic, Logrithmic and Inverse hyperbolic functions; Summation
of the series C+ iS; Limit and derivative of complex functions, Cauchy -Riemann equations, Analytic
functions, Entire functions and its applications.

UNIT III
Differential Calculus: Leibnitz theorem, Partial derivatives, Eulers theorem for homogenous function,
Total derivative, Change of variable; Taylors and Maclaurins series, Jacobian, Extrema of function of
two variables, Method of undetermined multipliers.

Multiple Integrals: Double and triple integrals and their applications, Change of order of integration,
Change of variables. Application of multiple integral to surface area and volume, Beta and Gamma
functions and their relationships.

UNIT IV
Vector Differentiation: Scalar and vector point functions, Gradient of a scaler field, Directional
derivative, Divergence and Curl of a vector field, Laplacian and second order operators.

Vector Integration: Line, surface and volume integrals; Vector integral theorems: Greens, Stokes and
Gauss divergence theorems (Without proof) and related problems.
Text Books:
1. Kreyszig E., Advanced Engineering Mathematics, Wiley ,9th edition.
2. B.S. Grewal,Higher Engineering Mathematics, Khanna Publishers

Reference Books:
1. Engineering Mathematics - H.K. Dass and Rama Verma, S. Chand Publications
2. Engineering Mathematics - N.P. Bali and Manish Goel, Laxmi Publications
3. Engineering Mathematics - D. Kandu, Neel Kamal Prakashan
4. Higher Engineering Mathematics - B.V. Ramana, Tata McGraw Hill Education Pvt. Ltd., New
Delhi
 PH-101 ENGINEERING PHYSICS

L T P Credits Sessional: 40 Marks

3 1 0 4 Exam: 60 Marks
Total: 100 Marks
Duration of exam: 3 Hrs

Note: The paper setter will set two questions from each Section/Unit and one question (Q. No. 9)
covering all Sections/Units which is compulsory and of short answer type of one mark each. A
candidate is required to attempt 5 questions selecting one question from each section. All
questions carry equal marks.

UNIT I
Theory of Relativity:- Inertial and non- inertial frames of reference, earth as an inertial frame of
reference, Michelson and Morley experiment, Postulates of special theory of relativity, Galilean and
Lorentz transformations, Time dilation and length contraction, Relativistic kinematics and mass-energy
equivalence.

Laser: Introduction, Characteristics of lasers, Spontaneous and stimulated emission of radiation

Einstein's coefficients, Population inversion, Ruby laser, Helium -Neon lasers, Applications of laser in
industry, Scientific and medical fields.

UNIT II
Oscillations: Simple harmonic motion (SHM), Differential equation of SHM, Energy of SHM,
Damped and Forced Oscillations, Relaxation Time, Quality Factor, Resonance, Sharpness of Resonance.

Fibre Optics: Fundamental ideas about optical fibre, Propagation mechanism, Acceptance angle and
acceptance cone, Numerical aperture, Propagation Mechanism and communication in fiber, Single and
Multi-Mode Fibers, Step index and Graded index fiber, Attenuation and losses, Applications of optical
fibres.

UNIT III
Quantum Mechanics: De Broglie waves, Phase and Group velocity concept, Uncertainty principle and
its application, Wave function, Postulates of quantum mechanics, Derivation of Schrodinger equation for
time independent and time dependent cases., Particle in one dimensional box, Potential well, Simple
harmonic oscillator (one dimensional and three dimensional).

X-rays: X-rays production, hard and soft x-rays, Continuous and characterstics x-rays, Bremsstrahlung
effect.

UNIT IV
Electromagnetic Waves: Maxwells equations, Wave equation, Plane electromagnetic waves,
Longitudinal and transverse waves, Superposition, Wave packets, Two and three dimensional waves,
Energy - momentum, Poyntings theorem, Electromagnetic boundary conditions
Superconductivity: Introduction and discovery of superconductivity, Meissner effect, Type-I and type-
IIP superconductors, Isotope effect, BCS theory (qualitative), High temperature superconductors,
Applications of superconductivity.

Text Books:
1. Applied Solid State Physics; Wiley India Pvt Ltd.
2. Quantum Mechanics: Theory and Applications- Ajoy Ghatak, Tata McGraw-Hill.
3. Engineering Physics; Satya Prakash and Vibhav saluja, Pragti Prakashan Meerut.
4. Modern Engineering Physics; A.S.Vasudeva, S. Chand & Co. Ltd.

Reference Books:
1. Optics- Ajoy Ghatak, Tata McGraw-Hill.
2. Optics- N. Subrahmanyam, Brij Lal, M.N. Avadhanulu, S. Chand & Co. Ltd.
3. Fiber optics and laser Principles and Applications- Anuradha De, New Age International.
4. Concepts of Modern Physics-Arthur Beiser, Tata McGraw-Hill.
5. Introduction to electrodynamics; David J Griffiths, Prentice Hall of India, New Delhi.
 ME - 101 ENGINEERING MECHANICS

L T P Credits Sessional: 40 Marks

3 1 0 4 Exam: 60 Marks
Total: 100 Marks
Duration of exam: 3 Hrs

Note: The paper setter will set two questions from each Section/Unit and one question (Q. No. 9)
covering all Sections/Units which is compulsory and of short answer type of one mark each. A
candidate is required to attempt 5 questions selecting one question from each section. All
questions carry equal marks.

UNIT- I
Introduction to engineering mechanics: Basic concepts, Laws of motion, Principle of Transmissibility
of forces; Resultants of force system: Parallogram law, Forces and components, Resultant of coplanar
concurrent forces, Components of forces in space; Moment of force - Principal of moment, Coplanar
applications, Couple, Resultant of any force system.

Equilibrium of Rigid Bodies: Free body diagram, Types of supports, Equations of equilibrium, Stable
equilibrium, Moments and couples, Moment of a force abount a point and about an axis, Equilibrium of
planer and spacial rigid body systems.

UNIT- II
Friction: Introduction, Theory of friction, Angle of friction, Laws of friction, Static and dynamic
friction, Motion of bodies: Angle of repose, Angle of friction, Cone of friction, Motion on inclined rough
surface, Lifting Machines: Wedge, Screw, Screw- Jack and Differential screw jack.

Centroid and Moment of Inertia: Centroid of plane, curve, area, volume and composite bodies,
Moment of inertia of plane area, Parallel Axes Theorem, Perpendicular axes theorems, Principal Moment
Inertia, Mass Moment of Inertia of Circular Ring, Disc, Cylinder, Sphere and Cone about their Axis of
Symmetry.

UNIT -III
Structural Analysis: Plane Truss, Space Truss, Difference between truss and frame, Types of truss-
Perect, Redundant, Deficient, Analysis of plane truss Method of sections, Method of joints, Graphical
method.

Beams: Types of beams, Statically determinate beams, Shear Force and Bending Moment in beams,
Shear Force and Bending Moment diagram, Relationship between Shear Force and Bending Moment.

UNIT -IV
Kinematics of Rigid body: Introduction, Plane Motion of Rigid Body - Rectilinear and curvilinear
translation, fixed axis rotation and general plane motion; Relative Velocity; Problems.
Kinetics of Rigid Body: Introduction, Force, Mass and Acceleration, Equations of motion, Work and
Energy, Impulse and Momentum, DAlemberts Principles and Dynamic Equilibrium; Problems.

Text Books:
1. Engineering Mechanics, K.L. Kumar, Tata McGraw Hill
2. Engineering Mechanics , Thimoshenko & Young , 4th ed, Tata McGraw Hil

Reference Books:
1. Engineering Mechanics : Statics and Dynamics, Shames and Rao, Pearson.
2. Vector Mechanics for Engineers: by Beer & Johnston, Tata McGrawHill
3. Statics and Dynamics : by Meriam, John Wiley & Sons.
4. Statics and Dynamics, by R.C Hibbler, Pearson
 CS -101 Computer Fundamentals and Programming in C++

L T P Credits Sessional: 40 Marks

3 1 0 4 Exam: 60 Marks
Total: 100 Marks
Duration of exam: 3 Hrs

Note: The paper setter will set two questions from each Section/Unit and one question (Q. No. 9)
covering all Sections/Units which is compulsory and of short answer type of one mark each. A
candidate is required to attempt 5 questions selecting one question from each section. All
questions carry equal marks.

UNIT I Computer Fundamentals

Evolution of computers; Basics of computer and its operation; Functional Components and their
interconnections, Concept of Booting. Classification of Computers.
Programming Languages: Machine Language, Assembly Language and High Level Language; Software
Concepts: Types of Software - System Software, Utility Software and Application Software; System
Software: Complier, Interpreter and Assembler; Need and Functions of Operating System.

UNIT II Number System, Codes and Memories

Binary, Octal, Decimal and Hexadecimal Number System and their Inter Conversion; BCD and ASCII
Codes; Processor Clock Speed (MHz, GHz), 16 bit, 32 bit and 64 bit processors.
Storage Units: Byte, Kilo Byte, Mega Byte, Giga Byte, Tera Byte, etc.; Memory Types: Cache; RAM,
ROM; Secondary Memory Internal and External storage.

UNIT III Introduction to C++

C++ character set, C++ Tokens (Identifiers, Keywords, Constants, Operators,), Structure of a C++
Program (include files, main function), Header files - iostream.h, iomanip.h, cout, cin; use of I/O operators
(<<and>>), Use of endl and setw (), Cascading of I/O operators, Error Messages; Use of editor, basic
commands of editor, compilation, linking and execution.

Concept of Data types; Built-in Data types: char, int, float and double; Constants: Integer Constants,
Character constants - \n, \t, \b), Floating Point Constants, String Constants; Access modifier: const;
Variables of built-in-data types, Declaration/Initialization of variables, Assignment statement, Type
modifier: signed, unsigned, long Operator and Expressions: Operators: Arithmetic operators (-,+,*,/,%),
Unary operator (-), Increment (++) and Decrement (--) Operators, Relation operator (>,>=,<=,=,!=),
Logical operators (!,&&,II), Conditional operator: <condition>?<if false>; Precedence of Operators;
Automatic type conversion in expressions, Type casting; C++ shorthands (+=,- =,*=,/=,%=) .

UNIT IV - Programming in C++

Conditional statements: if else, Nested if, switch..case..default, use of conditional operator, Nested
switch..case, break statement; Loops: while, do - while, for and Nested loops.

Defining a function; function prototype, Invoking/calling a function, passing arguments to function,

specifying argument data types, default argument, constant argument, call by value, call by reference,
returning values from a function, calling functions with arrays, scope rules of functions and variables local
and global variables.
Introduction to Array and its advantages; One Dimensional Array: Declaration/initialization of One-
dimensional array, inputting array elements, accessing array elements, manipulation of array elements
(sum of elements, product of elements, average of elements, linear search, finding maximum/minimum
value) Declaration / Initialization of a String, string manipulations (counting vowels/ consonants/ digits/
special characters, case conversion, reversing a string, reversing each word of a string); Two-dimensional
Array: Declaration/initialization of a two-dimensional array, inputting array elements accessing array
elements, manipulation of array elements (sum of row element, column elements, diagonal elements,
finding maximum / minimum values).

Defining a Structure (Keyword Structure), declaring structure variables, accessing structure elements,
passing structure to functions as value and reference argument/parameter, function returning structure
array of structure, passing an array of structure as an argument/ a parameter to a function.

TEXT BOOKS:
1. B. Gottfried, Schaum s Programming with C, Tata McGraw-Hill.
2. J. Hubbard, Schaum's Outline of Programming with C++ Tata McGraw-Hill.
3. E. Balaguruswamy, Programming in ANSI C, Tata McGraw-Hill.
4. Y. Kanetkar, Let us C, BPB Publications.
5. S. Lipschutz, Data Structures, Schaums Outlines Series, Tata McGraw-Hill.

REFERENCE BOOKS:
1. Brian W. Kernighan and Dennis M. Ritchie, The C Programming Language, Prentice Hall of India.
2. Ellis Horowitz, SatrajSahni and Susan Anderson-Freed, Fundamentals of Data Structures in C, W.
H. Freeman and Company.
3. Operating System Concepts, (6th Edition), by Abraham Silberschatz, Peter Baer Galvin, Greg Gagne.
 ME-102 ENGINEERING DRAWING & GRAPHICS

L T P Credits Sessional: 60 Marks

1 0 5 3 Exam: 40 Marks
Total: 100 Marks
Duration of exam: 3 Hrs

Note: The paper setter will set two questions from each Section/Unit and one question (Q. No. 9)
covering all Sections/Units which is compulsory and of short answer type of one mark each. A
candidate is required to attempt 5 questions selecting one question from each section. All
questions carry equal marks.

Unit-I
Introduction and Engineering Graphics: Drawing instuments, Introduction to IS code of drawing, Free
hand lettering (upper case & lowercase); Construction of conics sections by eccentricity method;
Construction of Cycloids, Involutes, Spirals and Helix; Scales: Plain, Diagonal and Vernier Scales;
Dimensioning.
Orthographic Projection of Lines and Planes: Projections of points in different quadrants; Projections
of straight lines inclined to one or both of the reference planes; True length and inclination of lines with
reference planes; Traces of lines.

Unit-II
Orthographic Projection of Solids: Projections of simple solids in simple positions, axis inclined to one
of the reference planes and axis inclined to both the reference planes-use change of position method OR
auxiliary projection method.
Sections of Solids: Sections of simple solids in simple vertical positions with section plane
perpendicular/inclined to one of the reference planes True shapes of sections.

Unit-III
Isometric Projections: Isometric projections and views of simple and truncated simple solids, sphere,
hemisphere and their combinations in simple position. Conversion of Pictorial views to Orthographic
views by free hand sketching.
Sections of Solids: Sections and sectional views of right angular solids - Prism, Cylinder, Pyramid and
Cone.

Unit-IV
Development of Surfaces: Development of surfaces of simple and cut regular solids - Prism, Pyramid,
Cylinder and Cone.
Intersection of surfaces: Intersection of prism in prism & cylinder in cylinder- axis bisecting at right
angles only.
Text Books
1. Engineering Drawing by N.D. Bhatt.
2. Engineering Graphics by P.S. Gill.
Reference Books:
1. Engineering Drawing and Computer Graphics -Shah, M.B. & B.C. Rana, Pearson Education,
2008
2. Engineering Drawing Practice for schools and colleges, Bureau of Indian Standards, New Delhi.
 HS-102 ENVIRONMENT & ECOLOGY

L T P Credits Sessional: 40 Marks

3 0 0 3 Exam: 60 Marks
Total: 100 Marks
Duration of exam: 3 Hrs

Note: The paper setter will set two questions from each Section/Unit and one question (Q. No. 9)
covering all Sections/Units which is compulsory and of short answer type of one mark each. A
candidate is required to attempt 5 questions selecting one question from each section. All
questions carry equal marks.

UNIT I
Introduction: Multidisciplinary nature of environmental studies, Scope and Importance; Natural
Resources -Renewable and non-renewable resources; Forest resources - Use and over-exploitation,
deforestation; Water resources - Use and over-utilization, floods, drought, conflicts over water; Mineral
resources - Use and exploitation; Food resources - World food problem, effects of modern agriculture;
Energy resources - Growing energy needs, renewable and non-renewable energy sources.

UNIT II
Ecosystems: Structure and function of an ecosystem ecological succession primary and secondary
succession - ecological pyramids pyramid of number, pyramid of energy and pyramid of biomass.

Biodiversity: Introduction - Genetic, species and ecosystem diversity, Value of biodiversity -

consumptive use, productive use, social, ethical and aesthetic values, Biodiversity at global, national and
local levels; Threats to biodiversity - habitat loss, endangered and endemic species of India.

UNIT III
Environmental Protection: National concern for environment: Important environmental protection acts
in India water, air (prevention and control of pollution) act, wild life conservation and forest act
functions of central and state pollution control boards - international effort key initiatives of Rio
declaration, Vienna convention, Kyoto protocol and Johannesburg summit.

UNIT IV
Chemical Toxicology: Toxic Elements in Water, Pesticides in Water, Impact of Toxic Chemicals on
Enzymes.

Waste Management: Waste water treatment (general) primary, secondary and tertiary stages; Solid
waste management: sources and effects of municipal waste, bio medical waste - process of waste
management.

Text Books:
1. Environmental Studies - J Krishnawamy, R J Ranjit Daniels, Wiley India.
2. Environmental Science - Bernard J. Nebel, Richard T. Right, Prentice Hall.
References Books:
1. Environment and Ecology - R K Khandal, Wiley India.
2. Environmental Science 8th edition ISV, Botkin and Keller, Wiley India.
3. Environmental Studies - Soli. J Arceivala, Shyam, R Asolekar, McGrawHill India, 2012.
4. Environmental Studies - D.L. Manjunath, Pearson Education India, 2007.
 CH -101 ENGINEERING CHEMISTRY

L T P Credits Sessional: 40 Marks

3 1 0 4 Exam: 60 Marks
Total: 100 Marks
Duration of exam: 3 Hrs

Note: The paper setter will set two questions from each Section/Unit and one question (Q. No. 9)
covering all Sections/Units which is compulsory and of short answer type of one mark each. A
candidate is required to attempt 5 questions selecting one question from each section. All
questions carry equal marks.

UNIT - I
Water Treatment: Introduction, Sources of water, Common Impurities in water, Hardness of water & its
determination by EDTA method, Alkalinity of water, BOD & COD; Hardness of water, Disadvantages of
hard water, sludge and scale formation in boilers and its prevention, Techniques of water softening
(Zeolite process and ion exchange process). Principles and processes used in domestic water purifiers.

Electrochemistry: Introduction to electrochemistry, Electrodes reference electrodes, Glass electrode

(pH determination), Nernst equationderivation and applications; Storage deviceslead-acid, Ni-Cd, Li-ion
batteries, Hydrogen-oxygen Fuel Cell and Solar Cell.

UNIT II
Corrosion: Introduction, types of corrosion (dry and wet corrosion), theory of corrosion, types of
electrochemical corrosion (galvanic, pitting, differential aeration and stress corrosion), Factors influencing
corrosion and Prevention of corrosion.

Spectroscopy: UV-Vis: Principle, instrumentation, Lambert-Beers Law, electronic transitions,

auxochrome, chromophore, effect of conjugation and solvent on transition of organic molecules,
applications.

IR: Principle, instrumentation, Fundamental vibrations, Hookes Law, effect of masses of atoms, bond
strength, nature of substituent and hydrogen bonding on IR frequency, applications.

XRD: Basic principle and applications

UNIT III
Fuels and Combustion: Introduction, classification of fuels ( Solid, Liquid and Gases), Analysis of Coal
(Proximate and Ultimate), Petroleum fuels, Cracking, Reforming, Octane no, Cetane no, Gaseous fuel
Water gas, producer gas.

Lubricants: Principle of Lubrication, Mechanism of Lubrication, Types and selection of lubricants,

Properties of Lubricants.
UNIT IV
Polymers: Introduction, Types of polymers, Thermoplastic and Thermosetting resins (Synthesis and
applications of Bakelite, epoxy resin, Urea formaldehyde, teflon, PMMA, PVC, Polyurethane), Natural
and synthetic rubbers, Fibres, Conducting & biodegradable polymers and their applications.

Nano Materials: Introduction, Prepration, Properties of nanomaterials, Graphene, Graphite, Fullerenes,

Carbonnanotubes, nanowires, nanocones, Application of nanomaterials.

Text Books:
1. Engineering Chemistry, Wiley India
2. Physical Chemistry - Gordon M. Barrow; McGraw Hill

References Books:
1. A Text Book of Engineering Chemistry, Shashi Chawala, 2013, Dhanpat Rai & Co.
2. Physical Chemistry-Peter Atkin, W.H. Freeeman Publishers.
 EE-101 PRINCIPLES OF ELECTRICAL ENGINEERING

L T P Credits Sessional: 40 Marks

3 1 0 4 Exam: 60 Marks
Total: 100 Marks
Duration of exam: 3 Hrs

Note: The paper setter will set two questions from each Section/Unit and one question (Q. No. 9)
covering all Sections/Units which is compulsory and of short answer type of one mark each. A
candidate is required to attempt 5 questions selecting one question from each section. All
questions carry equal marks.

UNIT I
Introduction: Sources of energy; General structure of electrical power systems, Power transmission and
distribution via overhead lines and underground cables, Steam, Hydel, and Nuclear power generation.

D C Circuits and Network Theorems: Circuit Concepts - Concepts of network, Active and passive
elements, Voltage and current sources, Concept of linearity and linear network, Unilateral and bilateral
elements - R, L and C as linear elements, Source transformation Kirchhoffs laws; Loop and nodal
methods of analysis; Delta-star and star-delta conversion; Network theorems - Superposition theorem,
Thevenins theorem, Nortons theorem and Maximum Power Transfer theorem.

UNIT II

Single Phase AC Circuits: Single phase EMF generation, average and effective values of sinusoids, j
operations, complex representation of impedances, phasor diagrams, power factor, power in complex
notation, solution of series and parallel circuits. Introduction to resonance in series RLC circuit,
Numerical problems; Introduction to domesting wiring.

Three Phase AC Circuits: Three-phase systems: Star and delta connections, three-phase three wire and
three-phase four-wire systems, analysis of balanced and unbalanced star and delta connected loads, power
in three-phase balanced circuits. Numerical problems.

UNIT III
Measuring Instruments: Types of instruments, Construction and working principles of PMMC and
Moving Iron type voltmeters & ammeters, Use of shunts and multipliers; dynamometer, wattmeter, AC
watthour meter.

Magnetic circuits: Amperes circuital law, B H curve, Hysteresis, Permeability and Reluctance,
Solution of magnetic circuits, Hysteresis and eddy current losses.

UNIT IV
Single Phase Transformer: Transformers: Construction and operation of single phase transformer, EMF
equation, ratings, phasor diagram on no load and full load, equivalent circuit, regulation and efficiency
calculations, open and short circuit tests, single phase auto-transformers.
Electric Machines: Working principle, Construction and applications of DC machines and AC machines,
Single phase induction motors - split phase, capacitor start and capacitor start & run motors; EMF and
Torque equations, Characteristics of DC generators and motors, Speed control of DC motors and DC
motor starters.

Text Books:
1. E. Hughes, Electrical Technology, Pearson Education, 2010.
2. I. J. Nagrath and D. P. Kothari, Basic Electrical Engineering TATA McGraw Hill Education, 2009.

References Books:
1. V. Del Toro, Electrical Engg Fundamentals, PHI Learning, 2009.
2. B. Dwivedi & A. TripathiFundamentals of Electrical Engineering Wiley India.
3. D. A. Bell, Electric Circuits, 7th Ed., Oxford Higher Education, 2009.
 EC-103 FUNDAMENTALS OF ELECTRONICS ENGINEERING

L T P Credits Sessional: 40 Marks

3 1 0 4 Exam: 60 Marks
Total: 100 Marks
Duration of exam: 3 Hrs

Note: The paper setter will set two questions from each Section/Unit and one question (Q. No. 9)
covering all Sections/Units which is compulsory and of short answer type of one mark each. A
candidate is required to attempt 5 questions selecting one question from each section. All
questions carry equal marks.

UNIT I
Semiconductors: Energy band concept of materials, difference between metal, insulator and
semiconductor, Intrinsic and extrinsic semiconductors (ntype & ptype), current conduction in
semiconductor, Photodiode, phototransistor, LED and sevensegment display.

Semiconductor Diodes: pn junction diode, Depletion layer, Energy diagrams of p-n junction and
depletion region, Biasing of dioade and V-I Charactristics; Rectifiers - halfwave, fullwave and bridge
rectifiers; Filters - L, C, LC and filters; Zener diode, V-I Characrristics and Zener diode as voltage
regulator.

UNIT II
Bipolar Junction Transistors (BJT): Transistor operation and current components in pnp and npn
transistors, input/output characteristics of CB and CE configurations, Biasing of transistors-fixed bias,
emitter bias, potential divider bias, comparison of biasing circuits; Transistor as an Amplifier;
Numerical problems as applicable.

Field Effect Transistors (FET): Basic construction, transistor action, concept of pinch off, maximum
drain saturation current, input and transfer characteristics, characteristic equation CG, CS and CD
configurations, fixed & self-biasing.

MOSFET: Depletion and enhancement type MOSFET- Construction, operation and characteristics.

UNIT III
Oscillators: Introduction, Criteria for oscillation, types of oscillators - Hartley, Calpitt, RC Phase shift
and Wein bridge oscillators.

Operational Amplifiers: Concept of ideal operational amplifiers, ideal operational amplifiers

parameters, inverting, non-inverting and unity gain amplifiers, adders and difference amplifiers.

UNIT IV
Number System and Logic Design: Number systems, Conversions and code, conversion of bases
(decimal, binary, octal and hexadecimal numbers), addition and subtraction, Boolean algebra, logic gates
(AND, OR, NAND, NOR, XOR, XNOR), concept of universal gate.
Electronic Instruments: Operation of CRO and its applications, Signal Generator, measurement of
voltage, phase and frequency using CRO.

Text Books:
1. Electronic Devices and Circuits D. A. Bell 5th Edition (Oxford)
2. Electronics Fundamentals & Applications D. Chattopadhyay and P. C. Rakshit 11th Edition (New
Age International)
3. Electronic Devices & Circuits R. L. Boylestad & L. Mashelsky 10th Edition (Pearson)
4. Digital Principles and Applications A. Malvino and Leach 7th Edition (TMH)

References Books:
1. Electronic Principles A. Malvino & D. J. Bates 7th Edition (TMH)
2. Integrated Electronics J. Millman, Halkias & Parikh 2nd Edition (TMH)
 ME-103: WORKSHOP TECHNOLOGY

L T P Credits Sessional: 60 Marks

1 0 5 4 Exam: 40 Marks
Total: 100 Marks
Duration of exam: 2 Hrs

Note: The paper setter will set 8 questions in all one question from each Unit and one question (Q. No.
8) covering all Units which is compulsory and of short answer type of one mark each. A
candidate is required to attempt 5 questions selecting one question from each section. All
questions carry equal (12) marks.

UNIT I
Introduction to Engineering Materials, and their classification; Steels, Cast Irons and their classification,
their properties & applications; Wrought iron; Alloy steels: stainless steel and tool steel.

Unit-II
Introduction to Metal Forming Processes, and Tools, Hot-working versus cold-working, Introduction to
Rolling, Wire & Tube-drawing/making and Extrusion, and their uses; Press-work, Die & Punch assembly,
applications of forming.

UNIT III
Basic Casting Processes, Casting equipment, Type and composition of Molding sands and their desirable
properties; Mould making with the use of a core, applications of casting.

UNIT IV
Non-Metallic Materials: Common types, Carpentry tools & uses of Wood, common types of Joints in
wood.

Unit-V
Machining, Machinining Tools, Basic principles of Lathe and operations performed on it. Basic
description of Shape, Planer, Drilling, Milling & Grinding.

UNIT VI
Introduction to Welding, classification of welding processes, Welding Tools, Introduction to Electric-Arc
welding, Resistance welding, Gas-welding, types of flames and their applications, Soldering & Brazing
processes and their uses.

UNIT VII
Fitting tools, fitting operations, sawing, filing, chipping, thread cutting (with taps and dies), marking and
marking tools.

Introduction to Manufacturing Systems, Fundamentals of Numerical Control (NC), Advantage of NC

systems, Classifications of NC, Comparison of NC and CNC.
Text Books:
1. Workshop Technology, Chapman, W. A. J. and Arnold, E., Vol. I & III, Viva Low priced
Student Edition.
2. Elements of Workshop Technology, Chaudhary, Hajra, Media Promoters & Publishers.
3. Manufacturing Processes, Kalpakjian and Schmid, Pearson

References Books:
1. Manufacturing Processes, H. N .Gupta, R. C. Gupta, ArunMital, New Age
2. Workshop Technology, Raghuwanshi, B. S. Vol. I & II, DhapatRai and Sons.
3. Manufacturing Process, BEGEMAN, M. I. and Amsted, B. H., John Wiley.

Suggested list of jobs, a student is required to make in the workshop - at least one job in each shop:

1. Introduction
Introduction to Need and importance of workshop, different materials to be utilized
Applications of Ferrous and Non-Ferrous metals alloys
2. Carpentry Shop:
Study of tools & operations and carpentry joints.
Prepare half-lap corner joint, mortise & tennon joints
Simple exercise on wood working lathe
3. Fitting Shop:
Study of tools & operations
Simple exercises involving fitting work -drilling, tapping or dieing
4. Black Smithy Shop:
Study of tools, operations, hot and cold working,
Simple exercises base on black smithy operations such as upsetting, drawing down, punching,
bending, fullering & swaging.
5. Welding Shop:
Study of equipments of Arc Welding and Gas welding (MIG/TIG)
Preparation of Simple butt and Lap welded joints.
Oxy-acetylene flame cutting and related job preparation
6. Sheet-metal Shop:
Introduction to Tools, Metals used in sheet metal work viz. Galvanised iron, Aluminium sheet, etc.
Fabrication of Funnel, tool-box, tray, electric panel box etc.
7. Machine Shop:
Study of Lathe, Drilling, Shaper, Planer and Milling Machines and commonly done operations on
these machines
Making a job on lathe involving plane turning, step turning, taper turning and threading operations
8. Foundry Shop:
Study of tools & operations, and pattern allowances
To prepare a Mould with the use of a core and cast it
 HS-103 DISASTER MANAGEMENT AND ENVIRONMENTAL SCIENCE

L T P Credits Sessional: 40 Marks

3 1 0 4 Exam: 60 Marks
Total: 100 Marks
Duration of exam: 3 Hrs

Note: The paper setter will set two questions from each Section/Unit and one question (Q. No. 9)
covering all Sections/Units which is compulsory and of short answer type of one mark each. A
candidate is required to attempt 5 questions selecting one question from each section. All
questions carry equal marks.

UNIT I
Introduction: Principles of Disaster Management. Natural Disasters such as Earthquake, Floods, Fire,
Landslides, Tornado, Cyclones, Tsunamis, Nuclear, Chemical, Terrorism, Extra Terrestrial and other
natural calamities. Hazards, Risks and Vulnerabilities. Assessment of Disaster Vulnerability of a location
and vulnerable groups, National policy on disaster Management.

UNIT II
Prevention, Preparedness and Mitigation measures for various Disasters, Post Disaster Relief & Logistics
Management, Emergency Support Functions and their coordination mechanism, Resource & Material
Management, Management of Relief Camp, Information systems & decision making tools, Voluntary
Agencies & Community Participation at various stages of disaster, management, Integration of Rural
Development Programmes with disaster reduction and mitigation activities.

UNIT III
Renewable and non-renewable resources, Role of individual in conservation of natural resources for
sustainable life styles. Use and over exploitation of Forest resources, Deforestation, Timber extraction,
Mining, Dams and their effects on forest and tribal people. Use and over exploitation of surface and
ground water resources, Floods, Drought, Conflicts over water, Dams- benefits and problems. Causes,
effects and control measures of Air pollution, Water pollution, Noise pollution and Nuclear hazards.

UNIT IV
Global Environmental crisis, Current global environment issues, Global Warming, Greenhouse Effect,
role of Carbon Dioxide and Methane, Ozone Problem, CFCs and Alternatives, Causes of Climate
Change Energy Use: Past, present and future, Role of Engineers.

TEXT BOOKS:
1. Disaster Management By G. K. Ghosh A. P. H. Publishing Corporation.
2. Environmental Studies, R Rajgopalan, Oxford University Press

REFERENCE BOOKS:
1. Disaster Management By B Narayan A. P. H. Publishing Corporation.
2. Environmental Studies, Basak, Pearson Publication.
 AS-201 BUISNESS COMMUNICATIONS
L T P Credits Sessional: 40 Marks
2 0 0 2 Exam: 60 Marks
Total: 100 Marks
Duration of exam: 3 Hrs

Note: The paper setter will set two questions from each Section/Unit and one question (Q. No. 9)
covering all Sections/Units which is compulsory and of short answer type of one mark each. A
candidate is required to attempt 5 questions selecting one question from each section. All
questions carry equal marks.

UNIT - I
Introduction to Business Communication: Importance ofcommunication in business,process and
models of communication, Types ofinformation- order, advise, suggestion, motivation, persuation,
warning and education.

UNIT- II
Business Communication: Letters, Cover Letter, Differences between bio-data, CV and Resume, Letter
for Job Application, Thank You Letter, Letter of Complaint, Memos, Memorandum drafting; E.
Communication: Email and Social Media.
Oral Communication: Types of oral communication, Barriers to oral communication, Mass
Communication Nature & Scope of Mass Communication, function of mass communication Media of
mass communication.

UNIT-III
Business Report Writing: Report Writing: Types, Structure of a report, Methods and Models of Report
Writing, Technical Proposal - Concept, Layout, and Examples of Technical Proposals.
Types of reports: Progress and Annual reports format and Analysis of sample reports from industry
Synopsis and thesis writing.

UNIT IV
Spoken and Presentation Skills: Impromptu speech tackling hesitation, shyness and nervousness in
speaking Public speaking; Academic and professional presentations Group discussions, Planning,
preparing and delivering a presentation, essentials of presentation - etiquette, clarity, lively delivery
speech rhythm, speech initiators body language voice, posture & gesture, eye contact, dress codes;
Interviewing, Nagociating a job offer.
Text Books:
1. Essentials of Business Communication by R. Pal and JS Korlahhi, Sultan Chand &amp; Sons,
New Delhi.
2 Basic Communication Skills for Technology by Andre J. Rutherford, Pearson Education Asia,
patparganj, New Delhi 92.
Reference Books:
1. Business Communication by Meenakshi Raman and Prakash Singh (Oxford)
2. Advanced Communication Skills, V. Prasad, Atma Ram Publications, New Delhi.
 MA - 202 ENGINEERING MATHEMATICS - II

L T P Credits Sessional: 40 Marks

3 1 0 4 Exam: 60 Marks
Total: 100 Marks
Duration of exam: 3 Hrs

Note: The paper setter will set two questions from each Section/Unit and one question (Q. No. 9)
covering all Sections/Units which is compulsory and of short answer type of one mark each. A
candidate is required to attempt 5 questions selecting one question from each section. All
questions carry equal marks.

UNIT I
Ordinary Differential Equations: Brief review of first order ordinary differential equations, Exact
differential equations, Equations reducible to exact equations; Solution of differential equations variable
separable.

Linear Differential Equations of first order and Higher degree: Equations of the first order and
higher degree, Linear differential equations with constant coefficients (nth order): general solution,
complementary function and particular integral; Method of variation of parameters, Equations reducible
to linear equations with constant co-efficients (Cauchys and Legendres linear equations), Applications
of differential equations to engineering problems.

UNIT II
Series Solution of Differential Equations: Series solution of second order differential equations with
variable coefficient (Power series method and Frobeneous method).

Special Functions: Bessel and Legendre equations and their series solutions, Properties of Bessel
function and Legendre polynomials.

UNIT III
Laplace Transforms: Laplace transforms of simple functions, Basic operational properties, Transforms
of derivatives and integrals, Initial and final value theorems; Inverse Laplace transforms Convolution
theorem; Periodic functions - Unit step function, Laplace transform of Periodic function; Applications of
Laplace transforms for solving linear ordinary differential equations up to second order with constant
coefficients only.

UNIT IV
Fourier Series: Periodic Functions, Fourier Series of period 2, Change of interval, Even and Odd
periodic functions, Expansion of odd and even periodic functions, Half range Sine and Cosine Series,
Typical wave-forms, Parsevals formula.
Partial Differential Equations: Harmonic analysis, Partial Differential Equations with constant
coefficients, Complimentary function and particular integral.

Text Books:
1 B.S. Grewal, Higher Engineering Mathematics, Khanna Publishers.
2. H.K. Dass and Rama Verma,Engineering Mathematics, S. Chand Publications.

Reference Books:
1. Engineering Mathematics - N.P. Bali and Manish Goel, Laxmi Publications
2. Higher Engineering Mathematics - B.V. Ramana, Tata McGraw Hill Education Pvt. Ltd., New
Delhi
 HS 111 COMMUNICATION LAB

L T P Credits Sessional: 30 Marks

0 0 2 1 Exam/Viva: 20 Marks
Total: 50 Marks

Practice sessions as per the topics in the syllabus for the course ENGLISH COMMUNICATION will
be conducted in the laboratory class. Following is the suggested list of excercises that must be performed
during the semester:

1. Phonetic transcription: Students will be trained to find out the correct pronunciation of words with
the help of a dictionary, to enable them to monitor and correct their own pronunciation.
i. transcription of words and short sentences in normal English orthography (writing) into their
IPA equivalents;
ii. transcription of words presented orally ;
iii. conversion of words presented through IPA symbols into normal orthography;
iv. syllable division and stress marking (in words presented in IPA form).

2. Listening: listening with a focus on pronunciation (ear-training), segmental sounds, stress, weak
forms, intonation; the students should be exposed, if possible, to the following varieties of English
during listening practice: Standard Indian, British and American.

3. Speaking: pronunciation practice (for accent neutralization), particularly of problem sounds, in

isolated words as well as sentences, practising word stress, rhythm in sentences, weak forms,
intonation; reading aloud of dialogues, poems, excerpts from plays, speeches etc. for practicein
pronunciation ;

5. Grammar and usage: The focus will be on the elimination of common errors. Some writing activities
(e.g. writing of short paragraphs on assigned topics) can be used to identify these errors.

6. Project Work: Students will be required to produce and submit by the end of Semester a 350-500
word project report on a topic of their choice. The project should involve data collection, analysis and
reporting.

Recommended books:
1. English Conversation Practice by Grant Taylor.
2. Business correspondence and Report Writing: by R. C. Sharma & Krishna Mohan.
3. Chrissie Wright (Ed.); Handbook of Practical Communication Skills; JAICO Books.
4. Veena Kumar, The Sounds of English, Makaav Educational Software, New Delhi.
 PH 111 ENGINEERING PHYSICS LAB

L T P Credits Sessional: 30 Marks

0 0 2 1 Exam/Viva: 20 Marks
Total: 50 Marks

Practicals as per the topics in the syllabus for the course will be conducted in the laboratory class.
Following is the suggested list of exercises out of which a minimum of 8-10 experiments must be
performed by a student during the semester:

List of Experiments:
1. To determine the wavelength of monochromatic light by Newtons Ring
2. To find the wavelength of light from a given source using Michelson,s interferometer.
3. To determine the wavelength of spectral lines using plane transmission grating.
4. To find the value of Plancks constant.
5. To verify Stefans law by electrical method
6. To determine the numerical aperture of an optical fibre.
7. To determine the attenuation & propagation losses in optical fibre.
8. To determine the height of a tower with a Sextant.
9. To determine the refractive index of a liquid by Newtons ring.
10. To determine the hall co-efficient.
11. To determine the band gap of an intrinsic semiconductor by four prove method.
12. To study the LASER beam characterstics like wavelength using diffraction grating aperture &
divergence.
13. To calculate the hysteresis loss by tracing a B-H curve for a given sample.
14. To compare the capacitances of two capacitors by Desauty Bridge.
15. To study the variation of magnetic field with distance by Stewart and Gees apparatus.
16. To find the value of e/m for electron by helical method.
 CS 111 COMPUTER PROGRAMMING LAB

L T P Credits Sessional: 30 Marks

0 0 2 1 Exam/Viva: 20 Marks
Total: 50 Marks

Practicals as per the topics in the syllabus for the course will be conducted in the lab class. Following is
the suggested list of suggestive exercises to be performed by a student during the semester:

Write following programs in C++:

1. Using basic statements like control statements, looping statements, various I/O statements and
various data structures.
2. Creating classes in C++ for understanding of basic OOPS features.
3. Representing concepts of data hiding, function overloading and operator overloading.
4. Using memory management features and various constructors and destructors.
5. Representing Inheritance, virtual classes and polymorphism.
6. Writing generic functions.
7. File handling programs.
8. Design and Implementation of some real life problems using Object Oriented techniques (Object
Model/Dynamic Model/Functional Model).
 EE 111 ELECTRICAL ENGG. LAB

L T P Credits Sessional: 30 Marks

0 0 2 1 Exam/Viva: 20 Marks
Total: 50 Marks

Experiments as per the topics in the syllabus for the course `Principles of Electrical Engg will be
conducted in the laboratory class. Following is the suggested list of experiments out of which 7-8
experiments must be performed during the semester:

List of Experiments:
1. Verification of Kirchhoffs law
2. Verification of Nortons theorem
3. Verification of Thevenins theorem
4. Verification of Series R-L-C circuit
5. Verification of Parallel R-L-C circuit
6. Measurement of Power and Power factor of three phase inductive load by two wattmeter method
7. To draw the magnetization characteristics of separately excited dc motor.
8. To perform the external load characteristics of dc shunt motor.
9. To perform O.C. and S.C. test of a single phase transformer
10. Wiring Exercises:
(a) Study of various wiring components (wires, switches, fuse, sockets, plugs, lamp holders,
lamps etc. their uses and ratings).
(b) Control of two lamps from two switches (looping system).
(c) Staircase wiring.
11. Step down transformer winding of less than 5VA.
 CH 111 ENGINEERNG CHEMISTRY LAB

L T P Credits Sessional: 30 Marks

0 0 2 1 Exam/Viva: 20 Marks
Total: 50 Marks

Practicals as per the topics in the syllabus for the course will be conducted in the laboratory class.
Following is the suggested list of excercises out of which a minmum of 8/10 experiments must be
performed by a student during the semester:

List of Experiments:
1. To determine surface tension of given liquid by drop number method using stalgmometer.
2. To determine % age of moisture, volatile matter, ash and fixed carbon in given
sample of coal by proximate analysis method.
3. To determine total alkalinity in a given sample of water using standard acid.
4. To determine the percentage of Chlorine in sample of CaOCl2 dissolved in one litre of
solution.
5. To determine total hardness of water using complexometric titration method.
6. To determine the surface tension of the two given unknown liquids by using Stalgmometer and
identify the given liquid.
7. To determine the coefficient of viscosity of the given unknown liquids by using Ostwalds
Viscometer and identify the given liquid.
8. To determine the coefficient of viscosity of the given lubricating oil using Red Wood Viscometer.
9. To determine total acid number value(total acid number TAN) of an oil sample.
10. To determine the flash point and fire point of given sample of oil using Pens key Martens
apparatus.
11. To determine the amount of Chlorine in given sample of water using N/20 sodium
Thiosulphate solution.
12 To determine the Beers Law and apply it to find the concentration of given unknown solution by
spectra-photometer.
 EC-111 ELECTRONICS ENGG. LAB

L T P Credits Sessional: 30 Marks

0 0 2 1 Exam/Viva: 20 Marks
Total: 50 Marks

Experiments as per the topics in the syllabus for the course Fundamentals of Electronics Engg will be
conducted in the laboratory class. Following is the suggested list of experiments out of which 7-8
experiments must be performed during the semester:

List of Experiments:
1. Familiarization with electronic components (Active & Passive)
2. Familiarization with electronic equipments (multimeters, CROs, power sypply and function
generators)
3. (a) Study of the characteristics of PN junction diode,
(b) Study of the characteristics of Zener diode
4. (a) Construction of halfwave rectifier and full wave rectifier circuits & study of their output
waveforms by CRO and calculation of efficiency and ripple factor.
(b) Construction of an unregulated DC power supply (using transformer, fullwave rectifier and
capacitor filter) and study of its output waveform by CRO.
5. Study of frequency response of any one oscillator.
6. Study of output characteristics of a Common Emitter Transistor.
7. Study of inverting and non inverting amplifiers using OpAmp.
8. Study of unity gain amplifier and Adder circuit using OpAmp and observe their outputs using CRO.
9. Study of truth tables of different logic gates (AND, OR, NAND, NOR, XOR, XNOR)