SOLAR PLUS ENERGY STORAGE

C O M PA R I N G S Y S T E M O P T I O N S

Chip Palombini
[email protected] dynapower.com
ENERGY STORAGE FOR MAXIMIZING PRODUCTION
AND REVENUE FROM PV POWER PLANTS SYSTEMS
OVERVIEW

NORTH AMERICA currently has over 20 GW of installed utility-scale PV generation. With 2016
seeing the largest amount of PV installed to date with over 14 GW brought online. The majority
of this installed utility-scale PV base could expand production hours and increase revenues
with the addition of energy storage.

Here we will examine the coupling of energy storage with PV by comparing three principle methods:
AC-coupled, DC-coupled, and Hybrid solar-plus-storage inverters. We will also consider all
possible revenue streams of solar plus storage and their availability based on available systems
for coupling storage.

Green Mountain Power

2 MW Solar Plus Storage
 So lar P lus St ora ge
REVENUE STREAMS

The addition of energy storage to an existing or new utility-scale PV installation allows

system owners and operators the opportunity to capture additional revenues through:

CAPACITY FIRMING
Turn Solar Energy into a Dispatchable Asset 12

For certain time periods during the day the availability of storage gives the system operator the ability to bid firm 10
Area
capacity into merchant markets. That is storage makes PV generation a dispatchable revenue generating asset. ener

OUTPUT POWER
8 DC-t
Depending on the available local energy market, this may translate to higher kWh rates for firm capacity during
6
dispatchable periods.
4

ENERGY TIME SHIFTING ENERGY SELLING *

6 AM

Utilize Generated PV Energy $

When Its Value is Highest SURPLUS

ENERGY
Reduced level of
energy purchase
Energy Consumption Level of Solar assisted by storage
Energy Storage allows bulk energy shifting of solar Energy Created battery

generation to take advantage of higher PPA rates in NIGHT TIME

EARLY
DAYTIME EVENING
NIGHT
MORNING TIME

peak periods, or to allow utilities to address daily peak

demand that falls outside periods of solar generation. B AT T E R Y
Figure 1 S TORAG E

H o u r s Ava i l a b le fo r D i s c h a rg e

*The battery does not discharge any energy while selling the surplus solar energy.

dynapower.com
CLIPPING RECAPTURE
Maximize Value of PV Generated Energy
Given common inverter loading ratios of 1.25:1 up
to 1.5:1 on utility-scale PV (PVDC rating : PVAC rating),
there is opportunity for the recapture of clipped
1.4MW
energy through the addition of energy storage. Clipped Energy Harvest

Using a simplified system for illustrative purposes,

1.0MW
consider a 14MWDC PV array behind a total inverter
capacity of 10MWAC. Depending on your location and
POWER

type of racking, the total clipped energy can be over

1,000,000 kWh per year.

With storage attached to the array, the batteries can

be charged with excess PV output when the PV inverter
hits its peak rating and would otherwise begin clipping. Figure 2: Clipping recapture opportunity on systems with high DC : AC ratios

This stored energy can then be fed into the grid at the
appropriate time. Without energy storage these kWhs
are lost and revenues stunted. 6 AM NOON 6 PM
TIME OF DAY

SAMPLE 20 MW PV INSTALLATION Annual Lost Production:

Inverter Loading Ratio = 1.45 1,923,256 kWh
275,000
249,548
231,174 231,046
225,000
203,916
Clipped PV Production kWh/Month

176,789 183,129
175,000
160,919

121,861 117,948
125,000

90,625
83,252
73,047
75,000

25,000

JAN FEB MAR APR MAY JUN JUL AUG SEPT OCT NOV DEC

Figure 3: Graph of clipped energy over a year.

dynapower.com
 CURTAILMENT & OUTAGE RECAPTURE
Continuous Uptime and Revenue Generation
When storage is on the DC bus behind the PV inverter, the The same uptime capabilities apply when a large utility-
energy storage system can operate and maintain the DC scale array is curtailed by the ISO or utility. Curtailment
bus voltage when the PV inverter is off-line for scheduled is sometimes seen in areas of high solar penetration
or unplanned outages. When the PV inverter is offline the such as California when there is overall excess
energy from the array can still flow to the batteries via the production on the grid. With a DC-coupled energy storage
DC-DC converter ensuring energy can be harvested for system, energy production can continue with energy being
later use. stored and available for discharge when curtailment

LOW VOLTAGE HARVESTING

Make Money On The Edges
PV inverters typically require a minimum threshold DC
bus voltage to operate. On a 1,500VDC nominal system,
12
this wake up voltage may be around 500VDC. As a result
of this minimum voltage threshold, available generated 10
Areas of harvestable
energy only with a
OUTPUT POWER

energy in the morning and evening when voltage on the 8 DC-to-DC converter
CLOUD
COVER

array is below the PV inverter wake up threshold is 6

not captured. Adding energy storage through a 4
DC-to-DC converter allows for the capture of this
2
generated energy from the margins.

6 AM 8 AM 10 AM 12 PM 2 PM 4 PM 6 PM
This phenomenonENERGY
also takes place when there is
SELLING

cloud coverage. In both $

cases this lost energy could
Figure 4
be captured by a DC-coupled
SURPLUS
energy storage system.
ENERGY
Reduced level of
energy purchase
Energy Consumption Level of Solar assisted by storage
battery
Energy Created

RA MP RATE CONTROL
EARLY NIGHT
NIGHT TIME DAYTIME EVENING
MORNING TIME

Modulate Power for Continuous Grid Connection

B ATTE RY
STORAG E

Ramp rate control is often required by utilities and ISOs

H o u r s Avai lab le for Di s ch arg e
A storage system coupled with PV can monitor PV
for PV and wind systems to mitigate the impact of a inverter output and inject or consume power to ensure
sudden injection of power onto the grid or a sudden the net output remains within the ramp requirements
loss of generation due to the intermittent nature of allowing for continuous energy injection into the grid.
both generation sources. Additionally, with this ramp rate control benefit, energy
otherwise lost when a PV inverter would self-regulate
A ramp rate of 1MW/minute, for example, has been during a ramp up (by manipulating the I-V curve to
required by HECO in Hawaii to limit rate at which a curtail power output) can now be stored for later use.
large array can come up to power or trail off in the
event of cloud cover.

dynapower.com
SOLAR PLUS
STORAGE
SYSTEMS
AC-COUPLED / DC-to-DC / HYBRID
Installation: Sprigg Electric 250KW MPS-250 coupled with Tesla batteries San Jose, CA

AC-Coupled Solar Plus Storage

In AC-coupled systems there are two inverters, one for
the battery and another for the solar PV system. With this =
Grid
system configuration the power to grid can be maximized ~
ESS Inverter
by discharging both the battery and PV at maximum
power. This configuration does pose integration challenges =
for microgrid operations. Dynapower offers AC-coupled ~
PV Inverter
solar plus storage at both behind the meter and utility
Figure 5: AC-Coupled Solar Plus Storage System
scale levels.

For more details on the AC-coupled design and concept, please

refer to Dynapowers AC-Coupled Solar Plus Storage white paper.

dynapower.com
Installation: Over Yonder Cay (The Exumas, Bahamas)

DC-Coupled Power System

Primarily of interest to grid-tied solar projects the DC-
coupled solution is a relatively new approach for adding ESS Converter
storage to existing, and new construction solar projects. =
=
Distinct advantages here include reduced cost and
potentially higher efficiency than the other options.
= Grid
~
For the tropical island of Over Yonder Cay, Dynapower
PV Inverter
provided a DC-to-DC converter which integrates battery
Figure 7: DC-Coupled Power System for Solar Plus Storage
energy storage and solar PV into the islands microgrid.

For more details on the DC-Coupled Power System for

Solar Plus Storage design and concept, please refer to
Dynapowers DC-Coupled Power System for Solar Plus
Storage white paper.

dynapower.com
Installation: PSG&E/Hopewell High School New Jersey

Hybrid Solar Plus Storage (HSPS)

With increased interest of combining solar and energy Dynapowers proprietary backup power capabilities
storage, Dynapower has created a line of hybrid Solar in the event of a grid disturbance.
Plus Storage inverters which have two DC inputs;
one with maximum power point tracking for PV, and For more details on the Hybrid Solar Plus Storage design
and concept, please refer
= to Dynapowers Hybrid Solar Plus
the second is bidirectional and intended for use with
Storage white paper. ~ Grid
battery energy storage. This type of system is ideal for
Hybrid
microgrids as integration is no long required between Inverter=
two separate inverters.
~ Grid
At Hopewell Valley Central High School, Dynapower Hybrid
teamed up with PSE&G to deliver a 1 MW project using Inverter
two of Dynapower containerized solar plus storage
systems. This project generates solar energy which

is self-consumed by the school and also features Figure 6: Hybrid Solar Plus Storage Inverter

dynapower.com
AC/DC/HYBRID
SYSTEM COMPARISON

DC-COUPLED AC-COUPLED HYBRID

CAPACITY FIRMING

ENE RGY TIME SHIFTING

CLIPPING RECA PTURE $

CURTAILMENT RECA PTURE $
LOW VO LTAGE HA RVES T $
RAMP RATE CONTROL $

PV TO GRID EFFICIENCY HIGH MEDIUM ME D I U M

PV TO BATTERY EFFICIENCY HIGH LOW ME D I U M

BATTE RY TO GRID EFFICIENCY MEDIUM MEDIUM ME D I U M

EASE OF MICROGRID INTEGRATION MEDIUM MEDIUM HIGH

EASE OF RE TROFIT OF EX ISTING PV HIGH HIGH LOW

COST MEDIUM LOW HIGH

Dynapower has successfully delivered all three system architectures for our customers in both grid-tied and
microgrid applications. When evaluating which of the system architectures is optimal, the options must be
compared across a variety of metrics including cost, efficiency, reliability, and flexibility. With over a decade
of experience in solar plus energy storage and over 350 MWs of inverters/converters deployed worldwide,
Dyanpower can asssit you in selecting the optimal system for your existing or new PV array.

For further information please contact:

[email protected]
Chip Palombini
Sales Manager Energy Storage

dynapower.com