Scribd
Upload
113 views

Template Foundation Borepile

This document is a pile design report for a project in Wattang Sawitto. It provides details of the pile capacity calculations including the diameter and depth of the pile, concrete strength, modulus of elasticity, average end bearing capacity, total side friction, safety factors, allowable bearing and lateral capacities, and allowable tension capacity. The ultimate and allowable pile capacities are calculated based on the end bearing capacity, side friction capacity, and self-weight of the pile.

Uploaded by

Muhammad Amar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
113 views

Template Foundation Borepile

This document is a pile design report for a project in Wattang Sawitto. It provides details of the pile capacity calculations including the diameter and depth of the pile, concrete strength, modulus of elasticity, average end bearing capacity, total side friction, safety factors, allowable bearing and lateral capacities, and allowable tension capacity. The ultimate and allowable pile capacities are calculated based on the end bearing capacity, side friction capacity, and self-weight of the pile.

Uploaded by

Muhammad Amar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

PILE DESIGN REPORT

Project : PILE Design Site Name : Wattang Sawitto


Client : PT. INTI BANGUN SEJAHTERA Site ID : ZMKS_0061
Deep Footing Design Based on ACI 318-05
3.2 CHECK OF BEARING

3.2.1 PILE CAPACITY

DIAMETER OF PILE Dp = 40 cm
DEPTH OF PILE Lp = 10.5 m
CONCRETE STRENGTH OF PILE f c' p = 18.675 Mpa
MODULUS ELASTICITY OF PILE Ep = 20311 Mpa

Qu
Qh
Ha
Dp
Ks-S1 qall-gross
Lp Qs

4d Ks-S2
qc average
4d qall-p

Qp

ULTIMIT PILE CAPACITY (Qu) = Qs + Qs - W


ULTIMIT END BEARING CAPACITY (Qp) = Ap.qc av
ULTIMIT SIDE FRICTION CAPACITY (Qs) = TF . Pp
ALLOWABLE PILE CAPACITY (Qall-p) = (Qs/SF1) + (Qs/SF2)
ALLOW. TENSION CAPACITY OF PILE (Tu) = (TF . Pp)/5 + W
ALLOW. BEARING CAPACITY OF PILECAP = qc/15
ALLOWABLE HORIZONTAL CAPACITY (Ha) = ((k.D)/b) . a

Qc AVERAGE qc av 106.261 kg/cm2


TOTAL FRCITION TF 1180.000 kg/cm
SAFETY FACTOR FOR END BEARING SF1 3.000 -
SAFETY FACTOR FOR SIDE FRCITION SF2 5.000 -
SECTION AREA OF PILE Ap 1256.637 cm2
PERIMETER OF PILE Pp 125.664 cm
ULTIMIT END BEARING CAPACITY Qp 133530.888 kg
ULTIMIT SIDE FRICTION CAPACITY Qs 148283.173 kg
SELF WEIGHT OF PILE W 3166.725 kg
ALLOWABLE BEARING PILE CAPACITY Qall-p 71000.205 kg
5540.745 kN/m2
SUBGRADE MODULUS OF PILE Ks -S2 664889.458 kN/m3
ALLOWABLE LATERAL CAPACITY Ha 37.440 kN
ALLOW. TENSION CAPACITY OF PILE Tu 291.135 kN

You might also like