Lampiran (C.E.
W)
PRICE VARIATION CLAUSE FOR
CIVIL ENGINEERING CONTRACT
ESTIMATION OF DIESEL CONSUMPTION
Note :
a) The Tenderer is required to fill in all plant and equipment (diesel engine type)
which shall be employed by him for the works together with the estimation of
consumption of each plant.
b) The quantities estimated by the tenderer shall be supported with documentary
evidence and are subject to verification and adjustment by the Engineer.
c) All plant and equipment shall be categorised as follows :
Category A - Earth moving plant and other equipment (diesel engine type) e.g.
Track-type tractors (bulldozers), motor graders, excavators, back-hoe/loaders,
self-propelled scrappers, off-highway trucks (dump trucks), earth compactors,
wheel loaders, track loaders, asphalt pavers, agricultural tractors, rollers,
compressors, mobile cranes etc.
Category B - Vehicles (diesel engine type) e.g. tippers (6 cu. Yd.,), 5-ton lorry
flat bottom etc.
Category C - Miscellaneous equipment e.g. water pumps, concrete mixers etc.
SUMMARY OF DIESEL CONSUMPTION
Category A - Earth moving plant & other equipment = litres
Category B - Vehicles = litres
Category C - Miscellaneous plant and equipment = litres
TOTAL ESTIMATED CONSUMPTION = litres
17
Attachment A
(C.E.W.)
ESTIMATED DIESEL CONSUMPTION FOR
CATEGORY A - EARTH MOVING PLANT AND OTHER EQUIPMENT
Capacity No. of Total Plant Average Total Estimated
Item Plant (in b.h.p.) Plant Hours to be Consumption Consumption
Employed (per plant hours) (in litres)
Total Carried to Summary:
(Use separate attachment if necessary)
18
Attachment B
(C.E.W.)
ESTIMATED DIESEL CONSUMPTION FOR
CATEGORY B - VEHICLES (DIESEL ENGINE TYPE)
Capacity No. of Total Average Total Estimated
Item Vehicle (in tons) Vehicles Vehicle- Consumption Consumption
Kilometer (per vehicle-km) (in litres)
Total Carried to Summary:
(Use separate attachment if necessary)
19
Attachment C
(C.E.W.)
ESTIMATED DIESEL CONSUMPTION FOR
CATEGORY C - MISCELLANEOUS PLANT AND EQUIPMENT
Capacity No. of Total Plant Average Total Estimated
Item Plant (in b.h.p.) Plant Hours to be Consumption Consumption
Employed (per plant hours) (in litres)
Total Carried to Summary:
(Use separate attachment if necessary)
20
JADUAL `A (C.E.W)
JADUAL BAGI MEMBUAT ANGGARAN KUANTITI DIESEL
CATEGORY PLANTS AVERAGE CONSUMPTION
A. Earth moving plant & other equipment 15 litres (3.5 Imp. Gallons)
(Diesel Engine Type) e.g. Track-type per 100 b.h.p. hour
tractor (bull-dozers), motor graders,
excavators, back-hoe/loaders, self-
propelled scrappers, off-highway trucks
(dump trucks), earth compactors, wheel
loaders, track loaders, asphalt pavers,
agriculture tractors, rollers, compressors,
mobile cranes.
B. Vehicle (Diesel Engine Type)
a) Tippers - 6 cu.yd. 4.2 km/litre (12 miles/imp. gallons)
b) Tippers - 8 cu.yd. 3.5 km/litre (10 miles/imp. gallons)
c) 5-Ton Lorry Flat Bottom 4.9 km/litre (14 miles/imp. gallons)
C. Miscellaneous Equipment, water pumps, 5 litres (1 imp. gallon)
concrete mix etc. per 10 b.h.p. hour.
Notes : a) The above schedules are for the purpose of estimation the quantities of diesel to
be used for the project at the time of tendering.
b) The actual quantities of diesel consumed shall be based on the documentary
evidence for the diesel consumption of each item of plant to be submitted by the
Contractor monthly.
JADUAL `B (C.E.W)
JADUAL BAGI MEMBUAT KUANTITI FUEL OIL
a) For the purpose of estimating the quantities of Fuel Oil at the time of tendering, the
following average consumption factor can be applied :-
9.0 litres (2 imp. Gallons) per
metric ton of bituminous materials
b) The actual quantity of Fuel Oil consumed shall be based on documentary evidence
submitted by the Contractor monthly.
21
JADUAL `C
JADUAL BAGI MENETAPKAN KUANTITI BITUMEN
(80/100 Gred Penusukan)
TABLE OF ESTIMATING QUANTITIES OF BITUMEN
(80/100 Penetration Grade)
Optimum Average Average Quantity Of Bitumen
Type Materials Max Bitumen Bitumen Compacted (tonne)
Content Content Density Per M.Ton Per Cu. M
(%) (%) (lb/cu.ft.) Of Materials Of Materials
1. Bituminous 1 Nominal 3.0-3.8 3.4 138 0.034 0.752
Macadam Base Size
Course aggregate
2. Dense Bituminous Nominal 4.4-5.4 4.9 138 0.49 0.1083
Macadam Wearing Size
Course aggregate
3. Asphaltic Concrete 1 Nominal 4.5-6.0 5.25 146 0.525 0.1228
Base Course Size
(Marshall mix) aggregate
4. Asphaltic Concrete 1 Nominal 5.0-6.5 5.75 146 0.575 0.1345
Size
aggregate
5. Asphaltic Concrete Nominal 5.5-7.0 6.25 146 0.625 0.1462
Wearing Course Size
aggregate
Note : a) The above schedule are for the purpose of estimating quantities of
Bitumen at the time of tendering.
b) The actual quantities of Bitumen incorporated into the Works shall be
based on the actual test result of the `Average Bitumen Content and
`Average Compacted Density.
c) Example: Nominal size Asphaltic Concrete with 60% Bitumen
Content and density of 146 Ib/cu. ft.
Quantity of Bitumen per a cubic of Mix laid
= 146 x 35.31467 x 0.06
2204
= 0.1404 M. Ton
22
