Super Class

HD 10/25-4 S Plus
Upright cold water high-pressure cleaner. Servopress for adjustment of pressure and water flow rate directly
on the trigger gun, pressure switch control, Easy-Press trigger gun with soft grip surface, pivoting stainless
steel spray lance, detergent tank, separate compartment for nozzles.

Standard accessories:
Spray gun Easy-press trigger
gun
Spray gun with Softgrip insert
High-pressure hose 10 m
Spray pipe 1050 mm
Triple nozzle (0 / 25 / 40)
Touchless
Dirt blaster
Anti-twist system
4-pole three-phase motor with
air and water cooling
Pressure switch-off
Large fine mesh water filter
Electronic motor protection
system with LED display
Oil sight glass
Servo Control
Brass water inlet fitting

Order number: 1.286-200.0

Technical data
Type of current Ph/V/Hz 3/400/50
Flow rate (l/h) 500-1000
Operating pressure (bar/MPa) 30-250/3-25
Max. pressure (bar/MPa) 275/27.5
Max. feed temperature (C) up to 60
Connection output (kW) 9.2
Weight (kg) 62
Dimensions (L x W x H) (mm) 560x500x1090
Detergent tank (l) 6
Details

Description
The three-phase HD 10/25-4 S Plus cold water high-pressure cleaner is user friendly and offers an
operating pressure of 250 bar at a maximum throughput rate of 1000 l/h.
Thanks to its upright construction, the HD 10/25-4 S Plus takes up less space than a conventional
machine and is much easier to manoeuvre, especially up and down steps and stairs. Its large diameter,
rubber-tyred wheels ensure maximum mobility even in difficult terrain. The push handle adjusts to the
most comfortable height for the user. Accessories that are not in use can be kept safely in a separate
nozzle compartment.
The easy-press trigger gun offers a high degree of user comfort since it requires less effort to hold and
operate and features a servopress controller for convenient adjustment of pressure and water flow rate.
The spray lance can be pivoted through 360 while operating at full pressure. Other features are the
pressure switch control, which turns off the pump as soon as the trigger is released and thus extends the
service life of the motor and pump, and the electronic monitoring system for the motor and pump unit. The
built-in detergent tank has a capacity of 6 litres.
The HD 10/25-4 S Plus has been designed for tough daily operating conditions. The chemical-resistant
brass cylinder head and ceramic pistons are combined with an efficient air-water cooling system to
guarantee a long service life.

Features & Benefits

Proven Krcher quality
4-pole water-cooled electric motor.
Robust brass cylinder head and ceramic pistons.
Reinforced, unbreakable plastic chassis.
Hose storage
Supported on both sides; for 20 m high-pressure hose.
For fast, convenient fitting and removal.
Hose guide passes under the unit; high stability.
For increased safety
Integrated electronics for unit monitoring.
Automatic switch-off in case of undervoltage or overvoltage.
Switches off in case of leaks or phase failure.
Outstanding mobility
Large rubber tyres for negotiating uneven surfaces, stairs and landings.
Proven sack trolley principle for easy, ergonomic transport.
Accessories

Adapter for variable pressure spray lance

Adapter for variable pressure lance
For items 4.760-230 and 4.760-362 for mounting accessories to lance, M 24/18 x
1.5
Order number 4.762-075.0
Adapters
Adapter M 22 Swivel
M22 x 1,5female and swivel connection. For extension of high-pressure hoses
with AVS connection or for usage of the telescopic lance with a high-pressure
hose with AVS connection.
Order number 4.424-004.0

Angled vario nozzle 0-90

Variable angle nozzle 090
Variable angle nozzle for spray angle adjustment from 0 to 90. For easy
adjustment to all kinds of soiling and surfaces.
Order number 4.763-039.0
Angular spray lance
Spray lance for toilets and rain gutters
Stainless steel lance WC and gutter with nozzle insert. Specially shaped for
effective and hygienic cleaning of gutters and toilets.
Order number 4.760-073.0
Automatic, self-winding hose reels
Automatic hose reel, coated
Automatic hose reel of durable plastic. Painted steel bracket. Suitable for 20 m
high-pressure hose.
Order number 2.639-919.0

Powder-coated swivel holder

Swivel holder for automatic hose reel wall mounting. For maximum action radius
and flexibility of high-pressure hose. Rotatable 120. Galvanised steel.
Order number 2.639-931.0

Automatic hose reel, stainless steel, includes swivel holder

Automatic stainless steel hose reel. With swivel holder. Suitable for 20 m high-
pressure hose.
Order number 6.391-421.0
Automatic, self-winding hose reels
Automatic hose reel, powder-coated steel / plastic
Automatic hose reel for 20 m high-pressure hose. The console is made from
powder-coated steel, the drum is made from plastic.
Order number 6.392-975.0

Automatic stainless steel / synthetic material hose drum

Automatic hose reel for 20 m high-pressure hose. The console consists of
stainless steel, the drum is made from plastic.
Order number 6.392-965.0

ABS automatic stainless steel hose drum

High-grade, automatic steel hose reel. Especially suitable for use in the food
industry. The material and finish provide for a corrossion-resistant, watertight
capsuled sprong drive. Connection for HP hoses with nipple.
Order number 2.641-866.0

ABS pivoting stainless steel wall bracket

Swivelling wall bracket made of high-grade steel (for 2.641-866). This makes
maximum flexibility and convenience possible when working with the HP hose.
Order number 2.641-867.0

Backflow check valve

Backflow preventer
To prevent detergent getting into the drinking water cycle in case of inlet at low-
pressure. - hot water resistant up to 80 C - tested according to IEC 60335-2-79 -
integrated leakage protection
Order number 2.641-374.0

Barrel and tank cleaning

Barrel cleaner BC 14/12
The BC 14/12 is an spray system for the efficient interior cleaning of containers
and barrels##, specially oak barrels with a volume of between 225 and 600 litres.
One cleaning cycle is completed within 36 seconds and every spot in the
container is covered by a water jet. After cleaning is finished the BC 14/12 can
easily and conveniently take up the dirty water. The transformer included with the
BC 14/12 makes it possible to use it worldwide (110 - 240 V, 50 - 60 Hz). The
nozzle kits included make possible use with high-pressure cleaners with a water
volume of 600 to 1400 l / h. Electrical components are protected in accordance
with IP 55.
Order number 2.641-740.0
Boron carbide nozzle
Boron carbide nozzle, for devices up to 1,000 l/h
In addition to nozzle packs. Very wear-resistant nozzle with boron carbide chuck
for continuous-duty operation.
Order number 6.415-084.0

Cleaning agent injector

Cleaning agent injector for high pressure (without nozzle)
Cleaning agent dosage at high pressure 3 - 5 %
Order number 3.637-170.0

Cleaning agent injector for high and low pressure (without nozzles)
Detergent injector for independent high and low pressure dosage. Maximum
dosage about 15%.
Order number 3.637-001.0
Connector
Nozzle screws / screw socket
Nozzle connector/screw connector for connecting high-pressure nozzles and
accessories to the high-pressure trigger gun (with nozzle connector). Connectors:
1x M 22 x 1.5 and 1x M 18 x 1.5.
Order number 4.402-022.0
Coupling
Connector
Brass double connector for connecting and extending high-pressure hoses. With
rubber protection. Connector: 2x M 22 x 1.5 m.
Order number 4.403-002.0

Crane lifting kit

Crane loading kit for HD super class
Effortless loading by crane.
Order number 2.640-438.0

Cup foam lance

Cup foam lance
Short, handy foam lance with adjustable spray angle with 1 litre detergent tank.
Ideal for cleaning cars due to its compact design.
Order number 6.394-668.0
Cup foam lance
1-litre cleaning agent container for foam lance
Order number 6.414-954.0

Device-specific nozzle kit with order no. 3.637-170.0

Device-specific nozzle kit with order no. 3.637-170, 7501,000 l/h
For HD/HDS 750 - 1000 l/h. Consists of nozzle insert + HP power nozzle + union
Order number 4.769-047.0

Device-specific nozzle kits for FR

Nozzle kit for surface cleaners
Nozzle kit includes power nozzles and unions. For Krcher surface cleaners (850
to 1100 l/h).
Order number 2.640-442.0

Device-specific nozzle kits for FRV

Nozzle kit 050 for FRV 30
Order number 2.642-433.0

Dirt blaster with changeover to fan jet

Dirt blaster with changeover to fan jet
Dirt blaster with rotating pencil jet offers 10 times better cleaning performance.
Changeover to high-pressure fan jet Further data: Max. 300 bar, 30 MPa, 85C.
Order number 4.763-957.0
Dirt blaster with changeover to low pressure cleaning agent intake
PCH / rotary nozzle 055/060, cleaning agent changeover
Dirt blaster rotating pencil jet 10x cleaning power. Ceramic nozzle and bearing
ring for long service life. Changeover to detergent intake (low pressure) max. 300
bar/30 MPa, 85 C
Order number 4.763-949.0
Dirt blaster, large
Dirt blaster not switchable
The dirt blaster with rotating pencil jet offers 10 times better cleaning
performance. Ceramic nozzle and bearing ring for a long service life. Further
data: Max. 300 bar, 30 MPa, 85C.
Order number 4.763-253.0
Double lance
Double lance 960 mm
960 mm double lance for variable pressure adjustment on handle at full water flow
rate. Suitable for agricultural use ( e.g. stable cleaning).
Order number 6.394-665.0

Easy Foam Set

Easy Foam Set with RM injector
HP foam system for use with. HD/HDS units for cleaning and disinfecting. Foam
nozzle for connection to lance and HP chemical injector with precision 0-5%
metering valve. The machine specific nozzle kit has to be ordered separately.
Order number 2.640-691.0

Easy Press high-pressure trigger gun with holding force reduction (Krcher patent)
Easy Press HP trigger gun with soft grip
Easy press high-pressure trigger gun with softgrip. For high-pressure hoses DN 6
and DN 8 with 11 mm swivel diameter.
Order number 4.775-463.0

Flexible spray lance

Flexible lance 1050 mm
1050 mm flexible lance with variable bend from 20 to 140, ideal for cleaning
difficult to reach areas, e.g. gutters.
Order number 6.394-654.0

Foam nozzle mounting kit

Foam nozzle attachment kit
Foaming agent kit. The foam nozzle is ideal for use in sanitary areas and the food
industry and wherever long application times are necessary.
Order number 2.637-926.0
Food industry version
High-pressure hose, 10 m, DN 8, AVS trigger gun connection, food,
grey
Food industry version, AVS connection in the trigger gun. grey NW 8/155 C/250
bar
Order number 6.390-704.0

High-pressure hose, 20 m, ID 8, AVS trigger gun connector, suitable

for food industry, grey
20 m high-pressure hose (DN 8) with patented (rotating) AVS trigger gun
connector. Non-discolouring outer layer for use in the food industry. NW
8/155C/250 bar.
Order number 6.390-705.0
Food industry version with unions on both sides
High-pressure hose, 10 m, DN 8, suitable for the food industry,
extension piece
10 m high-pressure hose (DN 8) with patented (rotating) AVS trigger gun
connector. Non-discolouring outer layer for use in the food industry. M 22 x 1.5
with anti-kink sleeve.
Order number 6.389-479.0

High-pressure hose, 20 m, ID 8, suitable for food industry, extension

piece
20 m high-pressure hose (DN 8) with swivel coupling. Non-discolouring outer
layer for use in the food industry. Connectors at both ends, M 22 x 1.5, with kink
protection. NW 8/155C/250 bar.
Order number 6.389-581.0
FR 30 Me surface cleaner
Hard surface cleaner FR 30 Me
Hot water resistant stainless steel surface cleaner with double ceramic bearings,
non-marking swivel castors and suction hose connection. Ideal for indoor
cleaning, e.g. food industry.
Order number 2.640-355.0

FRV 30 Me surface cleaner

FRV 30 Me
Order number 2.642-911.0

FRV 30 Me extension hose

Order number 4.441-040.0

Geka coupling
Geka connector with hose barb, R 3/4"
with hose liner
Order number 6.388-455.0
Geka coupling
Geka connector with inner thread, R 1"
with female thread
Order number 6.388-458.0

Grey wheel kit

Non-marking grey wheel attachment kit
Grey wheels that do not leave streaks for cleaning in the sanitary or food
industries or swimming pools.
Order number 2.641-493.0
Gutter cleaner
Gutter cleaning lance
The lance is suited for cleaning of gutter systems. Because of the shape of the
lance and the special nozzle the gutter can be cleaned without removing the
cover plates.
Order number 2.642-305.0
Hard surface cleaner FR 50
Hard surface cleaner FR 50
Hot water resistant stainless steel surface cleaner with 500 mm working width.
Ideal for large areas.With double ceramic bearings, push handle, non-marking
swivel castors and detergent dosing system.
Order number 2.640-679.0

Hard surface cleaner FRV 30

FRV 30 surface cleaner
Order number 2.642-999.0

Rubber lip for FRV 30

For smooth floors indoors. The squeegee increases the suction performance of
the FRV 30 and minimises the amount of water remaining. This means the floor is
dry in just a few minutes.
Order number 2.642-910.0

Extension hose 5 m
5m extension hose for FRV 30. Connection sleeve included.
Order number 4.440-939.0
Hard surface cleaner FRV 30
ABS hose fastening
Order number 2.642-528.0

ABS dirt trap

Order number 2.642-532.0

HKF 50 spray head, brass

HKF 50 spray head, brass
Depth of immersion 850 mm. Interior cleaning head for barrels and containers
with bungholes of 50 mm and more. Can be directly connected to the high-
pressure cleaner. Electric motor drive. Operation is possible both vertically and
horizontally
Order number 3.631-039.0

Inaktiv
HIgh-pressure hose Longlife 400, 10 m DN 8, AVS trigger gun
connection
Order number 6.389-856.0

Spray lance, 2,050 mm, swivelling, ergonomical

Spray lance, 2,050 mm, swivelling, ergonomical
Order number 4.760-366.0

Rotary coupling
Order number 4.401-076.0

High-pressure hose Longlife 400, 10 m, DN 8, extension

Order number 6.390-026.0
Inno Foam Kit
Inno Foam Set with detergent injector
High-pressure foam system with double lance (foam nozzle and high-pressure jet
for rinsing). For use with mobile and stationary high-pressure and HDS pressure
cleaners for cleaning or disinfection.
Order number 2.640-151.0

iSolar brushes and water softening

iSolar 400
Water-driven disc brushes with a working width of 400 mm for cleaning smaller
and medium-sized photovoltaic systems. Also perfect for use on elevated
systems.
Order number 6.368-456.0

iSolar 800
Water-powered brush head (800 mm) with two contra-rotating disc brushes for
cleaning photovoltaic systems. With flexible angle joint for uniform cleaning.
Order number 6.368-454.0

iSolar anti-drop device

Certified personal security system for rooftop work. Contents: Travelling fall
arrestor with shock absorber and 15 m kernmantle rope, harness, anchoring sling
and sheet steel case.
Order number 6.988-152.0

WS 50
Order number 6.368-463.0

WS 100
Order number 6.368-464.0
iSolar brushes and water softening
WS Regenerator
Order number 6.368-465.0

Longlife 400
High-pressure hose Longlife 400, 20 m, DN 8, AVS trigger gun
connector
20 m high-pressure hose Longlife 400 (DN 8) with patented (rotating) AVS trigger
gun connector and manual coupling. Two layer high-strength steel wire
reinforced.
Order number 6.390-208.0

Longlife 400 high-pressure hose, 10 m, DN 8,

Order number 6.391-351.0

Longlife 400 with unions on both sides

High-pressure hose 1.5 m, ID 8, including connectors
1.5 m high-pressure hose (DN 8, M 22 x 1.5) with kink protection and connectors
at both ends. For connecting to hose reels with appropriate connector (M 22 x
1.5).
Order number 6.390-178.0

High-pressure hose Longlife 400, 10 m, ID 8, including rotary

coupling
10 m high-pressure hose Longlife 400 (DN 8) with rotary coupling, two layer high-
strength steel wire reinforced. Connectors at both ends. M 22 x 1.5, with kink
protection.
Order number 6.388-083.0

High-pressure hose Longlife 400, 20 m, ID 8, extension

with rotary coupling, 2 x M 22 x 1.5
Order number 6.390-027.0

Longlife 400 high-pressure hose, 10 m, DN 8, extension piece

Order number 6.391-354.0
Longlife 400 with unions on both sides
High-pressure hose Longlife 400, 15 m, ID 8, including rotary
coupling
With rotary coupling, 2 x M 22 x 1.5
Order number 6.389-709.0

High-pressure hose Longlife 400, 30 m, ID 8, including rotary

coupling
With rotary coupling, 2 x M 22 x 1.5
Order number 6.390-294.0

Longlife food design

HIgh-pressure hose Longlife 400, 10 m, ID 8, AVS trigger gun
connection
Longlife HP hose for use in the food industry. Auendecke## animal-grease-
resistant, non-colour-bleeding material. With patented AVS connection in the
pistol (pivot mounted)
Order number 6.391-885.0

HIgh-pressure hose Longlife 400, 20 m, ID 8, AVS trigger gun

connection
Longlife HP hose for use in the food industry. Auendecke## animal-grease-
resistant, non-colour-bleeding material. With patented AVS connection in the
pistol (pivot mounted)
Order number 6.391-886.0
Longlife food design with screw connections at both ends
High pressure hose food ID 8, 10 m
Longlife HP hose for use in the food industry. Auendecke## animal-grease-
resistant, non-colour-bleeding material. With rotary coupling, 2 x M 22 x 1,5
Order number 6.391-864.0

High-pressure hose food industry 400 bar, 20 m, ID 8, including

rotary coupling
Longlife HP hose for use in the food industry. Auendecke## animal-grease-
resistant, non-colour-bleeding material. With rotary coupling, 2 x M 22 x 1,5
Order number 6.391-887.0

Manual hose reel attachment kit

Hose reel kit for HD super class
ABS hose reel for mounting on the machine. For safe and tidy stowage of high-
pressure hoses (with connecting hose to machines HP outlet) Can be rotated
under pressure, with M 22 x 1.5 connection.
Order number 2.640-439.0
Nozzle insert with order no. 3.637-001.0
Nozzle insert with order no. 3.637-001, high pressure for devices up
to 1,100 l/h
Nozzle insert for detergent injector 3.637-001 for high-pressure detergent
application. For high-pressure cleaners with a water flow rate up to 1100 l/h.
Order number 4.769-003.0

Nozzle insert with order no. 3.637-001, low pressure for devices up to
1,100 l/h
For low pressure with machines up to 1.100 l/h
Order number 4.769-001.0
Nozzle kit for spray head HKF 50 (3.631-009.0 / 3.631-039.0)
Nozzle 045 for 2-nozzle operation HKF 50
Nozzle for dual-nozzle operation
Order number 6.415-446.0

Nozzle 090 for 1-nozzle operation HKF 50

Nozzle for single-nozzle operation
Order number 6.415-447.0

Cone for plugging into bungholes

Cone for plugging into bungholes
Order number 4.132-002.0

Double grip for precise control of spray head

Double handle. Precise control of the spray head
Order number 2.863-036.0

Screw plug for using a spray head with one nozzle

Screw plug for using a spray head with one nozzle
Order number 5.411-061.0

Nozzle kits for Inno/Easy Foam Set

Nozzle kit 090 for Inno / Easy Set 7001,000 l/h
Nozzle kit contains Krcher power nozzles and nozzle inserts. For Inno/Easy-
Foam set 700-1000 l/h. For optimal foam system performance.
Order number 2.640-688.0
Nozzle kits for wet jet unit
Nozzle kit for wet jet unit 050
Nozzle kit with wet blasting nozzle and nozzle insert (type specific). For optimal
Krcher wet blasting attachment performance. Only in combination with wet
blasting attachment 4.762-010/-022.
Order number 2.637-902.0

Nozzle union
Nozzle connector
For protecting and connecting Krcher power nozzles to spray lances (M 18 x 1.5
IG).
Order number 5.401-210.0

Pipe cleaning hose, ID 6

Pipe cleaning hose, ID 6, 20 m
20 m flexible high-pressure hose (DN 6) for cleaning pipes up to 220 bar
(threaded connection for R 1/8 nozzle).
Order number 6.390-030.0

Pipe cleaning nozzle

Pipe cleaning dirt blaster D 25 / 060
The forward-tilted rotating pencil jet removes the most stubborn dirt. The three
backwards-tilted jets ensure the necessary forward movement, as well as
convenient handling.
Order number 6.415-945.0

Pipe cleaning dirt blaster D 30 / 060

The forward-tilted rotating pencil jet removes the most stubborn dirt. The three
backwards-tilted jets ensure the necessary forward movement, as well as
convenient handling.
Order number 6.415-947.0

Pipe cleaning dirt blaster D 35 / 060

The forward-tilted rotating pencil jet removes the most stubborn dirt. The three
backwards-tilted jets ensure the necessary forward movement, as well as
convenient handling.
Order number 6.415-949.0
Pipe cleaning nozzle
Pipe cleaning nozzle 100
Pipe cleaning nozzle with 24 mm diameter. With 4 nozzles tilted back at a 30
angle.
Order number 5.763-088.0

Pipe cleaning nozzle 120

Pipe cleaning nozzle with 24 mm diameter. With 8 nozzles tilted back at a 30
angle.
Order number 5.763-089.0

Pipe cleaning nozzle

16 mm pipe cleaning nozzle with internal thread. Various jet directions for
environmentally-friendly cleaning of blocked drains and pipes.
Order number 5.763-019.0

Pipe cleaning nozzle

16 mm pipe cleaning nozzle with internal thread. Various jet directions for
environmentally-friendly cleaning of blocked drains and pipes.
Order number 5.763-020.0

Pipe cleaning nozzle

30 mm pipe cleaning nozzle with internal thread. Various jet directions for
environmentally-friendly cleaning of blocked drains and pipes.
Order number 5.763-021.0

Rotating pipe cleaning nozzle

Rotating pipe cleaning nozzle with internal thread and four rotating jets for
environmentally-friendly cleaning of blocked drains and pipes.
Order number 6.415-440.0
Power nozzle spray angle 25
25 power nozzle for applying cleaning agent
Order number 2.884-521.0
Push-on washing brush
Push-on washing brush
Push-on wash brush for universal use. Simply push on to lance. Connector: M 18
x 1.6.
Order number 4.762-016.0
Quick connect
Quick coupling
For quick change of different spray lances and accessories. Optimum adaption to
Krcher accessories, especially for connection between trigger gun and spray
lance. With M22 x 1,5 female.
Order number 6.401-458.0

Male coupling
Hardened stainless steel nipple for quick coupling 6.401-458. With M22 x 1,5
male.
Order number 6.401-459.0
Rollover nozzle holder
Rollover nozzle holder
Rollover nozzle holder for contactless changeover from pencil jet to fan jet as well
as low-pressure detergent injection via knurled nut. Without nozzle insert.
(Additional type-specific power nozzle).
Order number 4.764-012.0
Rotary coupling
Rotary coupling
Krcher rotary coupling prevents twisting and kinking of high-pressure hoses for
ease of use. Connector M 22 x 1.5 m. With grip protection.
Order number 4.401-091.0
Rotating spray lances
1050 mm spray pipe, rotatable
1050 mm stainless steel lance (manual coupling) with ergonomic handle for ease
of use and protection. Rotatable 360 under pressure.
Order number 4.760-660.0

600 mm spray pipe, rotatable

600 mm stainless steel lance (manual coupling) with ergonomic handle for ease
of use and protection. Rotatable 360 under pressure.
Order number 4.760-664.0

850 mm spray pipe, rotatable

850 mm stainless steel lance (manual coupling) with ergonomic handle for ease
of use and protection. Rotatable 360 under pressure.
Order number 4.760-663.0
Rotating spray lances
1550 mm spray pipe, rotatable
1550 mm stainless steel lance (manual coupling) with ergonomic handle for ease
of use and protection. Rotatable 360 under pressure.
Order number 4.760-661.0

2050 mm spray pipe, rotatable

2050 mm stainless steel lance (manual coupling) with ergonomic handle for ease
of use and protection. Rotatable 360 under pressure.
Order number 4.760-662.0

Rotating washing brush

Rotating washing brush for > 800 l/h devices
Order number 4.762-559.0

Rotating washing brush for > 800 l/h devices

Order number 4.762-562.0

Servo control
Servo control
Order number 4.775-470.0

Solar cleaning telescopic lances

iSolar TL 7 H (without hose)
Telescopic rod made from a carbon/fibreglass mixture for maximum rigidity with
minimum weight. With 7.2 m max. reach and practical quick-release couplings for
easy extension and retraction.
Order number 4.107-054.0
Solar cleaning telescopic lances
iSolar TL 10 H (without hose)
Telescopic rod made from a carbon/fibreglass mixture for maximum rigidity with
minimum weight. With 10 m max. reach and practical quick-release couplings for
easy extension and retraction.
Order number 4.107-053.0

iSolar TL 10 C (without hose)

Order number 4.107-055.0

iSolar TL 14 C (without hose)

Full carbon telescopic rod for maximum rigidity with minimal weight. With 14 m
max. reach and practical quick-release couplings for easy extension and
retraction.
Order number 4.107-052.0

iSolar HP hose 7
High-quality, flexible HP hose (with rubber covering) for the iSolar TL 7. The outer
layer has especially good sliding properties when extending and retracting the
telescopic rod.
Order number 6.392-978.0

iSolar HP hose 10
High-quality, flexible HP hose (with rubber covering) for the iSolar TL 10. The
outer layer has especially good sliding properties when extending and retracting
the telescopic rod.
Order number 6.392-977.0

iSolar HP hose 14
High-quality, flexible HP hose (with rubber covering) for the iSolar TL 14. The
outer layer has especially good sliding properties when extending and retracting
the telescopic rod.
Order number 6.392-976.0
Spacer (including nozzle union)
Spacer (includes nozzle screws)
Guarantees constant safety clearance, e.g. for tyres and bodywork. Helps prevent
damage to sensitive surfaces. Mounts directly to lance.
Order number 5.394-294.0

Special hoses
High-pressure hose 1.5 m, ID 8, including connectors, outlet bend
Order number 6.388-886.0

Spray lance
250 mm lance, non-rotatable
250 mm stainless steel lance. With manual coupling. Non-rotatable.
Order number 4.760-667.0

Spray lances
Vibrasoft lance
The spring-loaded 360 loop handle significantly reduces the vibrations on the
spray lance, reducing the physical burden on the user, e.g. when working with the
dirt blaster.
Order number 6.415-951.0

Standard
High-pressure hose, 10 m, ID 8, AVS trigger gun connector
10 m high-pressure hose (M 22 x 1.5) with kink protection. With patented rotating
AVS trigger gun connector and manual coupling. Further data: DN 8/155C/315
bar.
Order number 6.390-025.0

High-pressure hose, 15 m, ID 8, AVS trigger gun connector

15 m high-pressure hose (M 22 x 1.5) with kink protection. With patented rotating
AVS trigger gun connector and manual coupling. Further data: DN 8/155C/315
bar.
Order number 6.390-185.0

High-pressure hose, 20 m, ID 8, AVS trigger gun connector

20 m high-pressure hose (M 22 x 1.5) with kink protection. With patented rotating
AVS trigger gun connector and manual coupling. Further data: DN 8/155C/315
bar.
Order number 6.390-171.0
Standard with unions on both sides
High-pressure hose, 15 m, ID 8, 315 bar, including rotary coupling
Order number 6.390-010.0

High-pressure hose, 20 m, ID 8, 315 bar, extension piece

Order number 6.390-031.0

High-pressure hose, 15 m, ID 10, 220 bar, extension piece

Order number 6.390-023.0

High-pressure hose, 10 m, ID 8, 315 bar, extension piece

Order number 6.391-342.0

High-pressure hose, 30 m, ID 8, including rotary coupling

Order number 6.390-293.0

Suction filter
Suction filter with check valve
Brass suction filter suitable for ponds, storage tanks, etc. With check valve.
Order number 4.730-012.0

Water suction filter

Order number 6.414-956.0
Telescopic spray lance
Telescopic spray pipe
Order number 6.394-690.0

Strap for telescopic spray pipe

Convenient strap for relief when working with the telescopic spray lance
(6.394-690). The burden is optimally distributed on the body and longer periods of
use are possible.
Order number 6.373-987.0

Trigger guns
High-end HP trigger gun
Order number 4.775-823.0

Triple nozzle, touchless changeover

Triple nozzle, touchless changeover
Triple nozzle with high-pressure pencil jet (25) and low-pressure fan jet (40).
Fast and easy jet changeover by turning the nozzle.
Order number 4.767-065.0
Triple nozzles
Triple nozzle 050
Triple nozzle with manual nozzle changeover. Convenient spray adjustment. For
high-pressure cleaners with injector; low-pressure fan jet for detergent removal
and application. Connector M 18x1.5.
Order number 4.767-154.0

Undercarriage spray lance

Underbody lance
Stainless steel lance for effective and easy underbody and wheel arch cleaning.
Without high-pressure nozzle.
Order number 4.760-245.0
Variable pressure spray lance
Variable pressure spray lance
670 mm variable pressure lance with integrated pressure gauge. Variable
pressure adjustment on the handle. Nozzle connector: M 24 x 1.5. Low pressure
detergent application.
Order number 4.760-362.0

Variable pressure lance

1040 mm pressure adjustable lance with integrated pressure gauge. Variable
pressure adjustment on the handle. Nozzle connector: M 24 x 1.5. Low pressure
detergent application.
Order number 4.760-230.0
Water fine filter
Water fine filter, with adapter
Fine-mesh water filter, 125 m, max. temperature 50C. Protects the high-
pressure cleaner from dirt particles contained in the water. Water flow rate up to
1200 l/h. Connection 3/4", with adapter, 1".
Order number 4.730-102.0

Water fine filter, 100 m, R 1"

Fine-mesh water filter, 100 m, max. temperature 60C. Connects to high-
pressure cleaner. Protects the high-pressure cleaner from dirt particles contained
in the water. Water flow rate up to 1200 l/h. Connector 1".
Order number 2.638-270.0

Water supply hose

Water supply hose
NW 19 R1" / R 3/4", up to 85 C, for pick-up
Order number 4.440-207.0

Water supply hose

NW 19 R1" / R1", up to 85 C
Order number 4.440-270.0

Wet blasting attachment (without nozzle)

Wet blasting attachment with flow control (without nozzles)
Paint, rust and scale removal made easy: Krcher wet blasting attachment with
flow control for adding blasting abrasive to the high-pressure jet.
Order number 4.762-010.0

Wet blasting attachment without flow control (nozzles not included)

Paint, rust and scale removal made easy: Krcher wet blasting attachment with
flow control for adding blasting abrasive to the high-pressure jet. Without flow
control.
Order number 4.762-022.0
Y distributor
Y distributor
Order number 4.405-048.0