7/9/2017 Dimensions and dimensional tolerances of Long Radius Elbows 45 and 90 Degrees and 3D Elbows, NPS 1/2 to NPS
1/2 to NPS 48, ASME B16.9
home sitemap about jobs abbrev fun question conversion advertising copyright contact
DOCS MATL SOCY PIPES FLG FTTG VALVES BOLTS GASKETS EQPT SPECIALS STEEL DIN
STEAM CIVIL OTHS
01 Stainless Water Bottles 03 Steel Pipe
02 All Stainless 04 Steel Manufacturing
Dimensions Butt Weld Elbows 45-90 LR & 3D
according to ASME B16.9
90 45 90 45
O.D. Long Rad Long Rad 3D 3D
NPS
D Center to End Center to End Center to End Center to End
A B A B
http://www.wermac.org/fittings/dim_elbows_a.html 1/5
7/9/2017 Dimensions and dimensional tolerances of Long Radius Elbows 45 and 90 Degrees and 3D Elbows, NPS 1/2 to NPS 48, ASME B16.9
1/2 21.3 38 16 ... ...
3/4 26.7 38 19 57 24
1 33.4 38 22 76 31
1 42.2 48 25 95 39
1 48.3 57 29 114 47
2 60.3 76 35 152 63
2 73 95 44 190 79
3 88.9 114 51 229 95
3 101.6 133 57 267 111
4 114.3 152 64 305 127
5 141.3 190 79 381 157
6 168.3 229 95 457 189
8 219.1 305 127 610 252
10 273 381 159 762 316
12 323.8 457 190 914 378
14 355.6 533 222 1067 441
16 406.4 610 254 1219 505
90 45 90 45
O.D. Long Rad Long Rad 3D 3D
NPS
D Center to End Center to End Center to End Center to End
A B A B
http://www.wermac.org/fittings/dim_elbows_a.html 2/5
7/9/2017 Dimensions and dimensional tolerances of Long Radius Elbows 45 and 90 Degrees and 3D Elbows, NPS 1/2 to NPS 48, ASME B16.9
18 457 686 286 1372 568
20 508 762 318 1524 632
22 559 838 343 1676 694
24 610 914 381 1829 757
26 660 991 406 1981 821
28 711 1067 438 2134 883
30 762 1143 470 2286 964
32 813 1219 502 2438 1010
34 864 1295 533 2591 1073
36 914 1372 565 2743 1135
38 965 1448 600 2896 1200
40 1016 1524 632 3048 1264
42 1067 1600 660 3200 1326
44 1118 1676 695 3353 1389
46 1168 1753 727 3505 1453
48 1219 1829 759 3658 1516
90 45 90 45
O.D. Long Rad Long Rad 3D 3D
NPS
D Center to End Center to End Center to End Center to End
A B A B
Dimensions are in millimeters unless otherwise indicated. Wall thickness (t) must be specified by
customer.
DIMENSIONAL TOLERANCES OF BUTT WELD ELBOWS - 45 AND 90 - LR AND 3D -
ASME B16.9 -
Nominal Pipe Size 1/2 to 2 3 to 3 4 5 to 8
Outside Diameter + 1.6 1.6 1.6 + 2.4
at Bevel (D) - 0.8 - 1.6
Inside Diameter at End 0.8 1.6 1.6 1.6
Center to End LR (A/B) 2 2 2 2
Center to End 3D (A/B) 3 3 3 3
Nominal Pipe Size 10 to 18 20 to 24 26 to 30 32 to 48
Outside Diameter +4 + 6.4 + 6.4 + 6.4
http://www.wermac.org/fittings/dim_elbows_a.html 3/5
7/9/2017 Dimensions and dimensional tolerances of Long Radius Elbows 45 and 90 Degrees and 3D Elbows, NPS 1/2 to NPS 48, ASME B16.9
at Bevel (D) - 3.2 - 4.8 - 4.8 - 4.8
Inside Diameter at End 3.2 4.8 + 6.4 + 6.4
- 4.8 - 4.8
Center to End LR (A/B) 2 2 3 5
Center to End 3D (A/B) 3 3 6 6
Wall Thickness (t) Not less than 87.5% of Nominal Wall Thickness
Dimensional tolerances are in millimeters unless otherwise indicated and are equal except as
noted.
Note:
MSS SP-43 only covers stainless steel buttweld fittings made for
use with Schedule 5S and 10S pipe and Stub Ends suitable for
use with Schedule 40S pipe, as defined in ASME B36.19. The
dimensions and dimensional tolerances defined in MSS SP-43 are
substantially the same as those in ASME B16.9 specifications
from NPS 1/2 - NPS 24. Except with regard to the outside
diameter at the bevel.
VARIOUS PIPING RELATED ARTICLES (ranked on last addition)
Williams Geismar Olefins Pressure Testing Nord Stream 2
Reboiler Rupture Catastrophic Failure From Russia to Europe
First car
powered by formic acid
SHOW M E M ORE
Werner Slken 2008 - 2017. All rights reserved.
http://www.wermac.org/fittings/dim_elbows_a.html 4/5
