GASKETS and GASKET MATERIAL
QUICK REFERENCE GUIDE
7635 RO NSO N RO AD SAN DIEG O , CALIFO RNIA 92111 TEL: 858-278-3270 FAX: 858-278-2950
E-MAIL: sales@ sandiegoseal.com VISIT US AT: www.sandiegoseal.com
COMPRESSED NON-ASBESTOS MATERIAL
STYLE FIBER / Max.Temp. Application
BINDER /Pressure
SYNTHETIC 550F NON-ASBESTOS GASKET MATERIAL
InterFace SBR 1200 PSI Meets MIL-G-24696B
Solutions A HIGH PERFORMANCE, COMPRESSED MICROPORE
MATERIAL, PRODUCED WITH EXCLUSIVE
CMP-4001 HYDRO-FUSED PRODUCTION PROCESS. IT IS A UNIQUE
BINDER BLEND AND SYNTHETIC FIBER
MATRIX. IT HAS EXCELLENT SEALABILITY AND TORQUE
RETENTION PROPERTIES.
101 ARAMID / 750F For oils, greases, hydrocarbon solvents, some
(GREEN) NBR. 1600 PSI refrigerants, gases
30 ARAMID / 700F For freon type refrigerants, high alkalines, oils,
(BLUE) NBR 500 PSI ammonia, water & gases
32 ARAMID / 700F For steam, water & salt alcohols, weak acids &
(OFF-WHITE) SBR. 1200 PSI alkalines - also air and inert gases
PREMIUM PHENOLIC / 800F This unique high-performance compressed sheet is
8400 NBR 1500 PSI an excellent gasket material for use in steam, mild
(GOLD) caustics and acids in.
The phenolic fibers and minerals combined with high-
grade Nitrile NBR rubber gives it higher temperature
limits than aramid based materials and better
handling and cutting characteristics than carbon and
glass fiber products.
HIGH PERFORMANCE GASKETS and GASKET MATERIAL
Common or Max. Temp* Application
Trade Name
Max. pressure
Oxidizing Pure exfoliated graphite material handles extreme
FLEXIBLE -400F to +850F temperatures, resists nearly all non-oxidizing chemicals and
offers excellent compressibility and low creep relaxation.
GRAPHITE Non-Oxidizing AVAILABLE IN
-400F to HOMOGENEOUS MATERIAL
+4500F METALLIC INSERT
NON-METALLIC INSERT
3000 psi POLYMER LAMINATED
In Air: Corrugated metal core encapsulated by flexible graphite.
GRAPHITE with -330F to +850F Excellent for high temperature and corrosive chemicals.
Works well in less-than-perfect flanges and thermocycling
CORRUGATED In Steam applications.
METAL CORE -330F to
+1200F Only available in pre cut form: ring and full face, ovals and
heat exchanger gaskets
3000 psi
Style 110 900F Max Multi-service high strength carbon and NBR gasket sheet,
CARBON FIBER / -40F Min designed to handle the extremes of pressure and
temperature.
NBR binder 650F Continuous Excellent sealability during thermal cycling even in steam,
(Black) hot oil, hydrocarbons, gases, acids and alkalies.
2300 psi
Style 99 1000F Max Graphite fiber gasketing withstands extreme temperature
GRAPHITE FIBER -40F Min and pressure, provides good chemical resistance and is fire
safe.
/ NBR binder 650F Continuous
(Mahogany)
2000 psi
1800F Thermiculite will not oxidized, even at temperatures up to
THERMICULITE
1800F
CRITICAL SERVICE 2900 psi
SERIES Chemical compatibility exceeds graphite.
815 Tanged Sheet Available in sheet with reinforced tanged core and as a filler
material for spiral wound gaskets.
835 Spiral Wound
Filler
7635 RONSON ROAD SAN DIEGO, CALIFORNIA 92111 TEL: 858-278-3270 FAX: 858-278-2950
E-MAIL: [email protected] VISIT US AT: www.sandiegoseal.com
SPIRAL WOUND GASKETS Sizes Available
with RETAINING RING 24 IN STOCK
(FLEX GASKETS)
(26 and Above call for availability)
Available pressure classes
150#, 300#, 400#, 600#,
900#, and 1500#.
(2500# class call for availability)
Standard Material
Windings: 304, 316L, 347 Stainless steel
Filler: Graphite
OUTER RING OUTER and INNER RING
Outer ring: Carbon steel
(Available in a variety of other materials)
BOILER MANHOLE PLATE SPIRAL WOUND GASKETS BOILER HANDHOLE
CONFIGURATIONS CONFIGURATIONS
FOR BOILER CAP and MANHOLE COVER
ASSEMBLIES
ROUND ROUND
MATERIALS RECTANGULAR
OBROUND Standard materials are 304, 316L
and 347 Stainless Steel windings
with graphite filler.
Special materials to suit specific operating OBROUND
conditions are available.
OVAL
TO ORDER
A) Name of boiler or equipment OVAL
manufacturer
B) Gasket style
C) Dimensions of gasket
D) Gasket thickness DIAMOND and PEAR
E) Flange width of gasket SHAPES
F) Pressure service ALSO AVAILABLE
G) Gasket material preference
7635 RONSON ROAD SAN DIEGO, CALIFORNIA 92111 TEL: 858-278-3270 FAX: 858-278-2950
E-MAIL: [email protected] VISIT US AT: www.sandiegoseal.com
RUBBER MATERIAL
Common or Max. Temp* Application
Trade Name
(ASTM Reference)
250F Resistant to: Moderate Chemicals and acids,
NEOPRENE (CR) ozone, oils, fats, greases, many oils & solvents.
NITRILE OR 250F Resistant to: many hydrocarbons, fats, oils,
greases, hydraulic fluids, chemicals.
BUNA-N (NBR)
(also available in white buna-n for FDA
applications)
CLOTH 180F Resistant to: Air, hot water,saturated steam, low
INSERTED pressure steam and hydraulic services.
(C.I.)
SBR
NYLON 200F Resistant to: Moderate oil resistance is required
INSERTED SBR and where hot or cold water and gases are being
conveyed.
For applications requiring more fabric strength
than C.I.
CLOTH 200F Resistant to: Moderate oil resistance is required
INSERTED and where hot or cold water and gases are being
conveyed.
NEOPRENE
NEOPRENE 200F Resistant to: Moderate oil resistance is required
DIAPHRAGM and where hot or cold water and gases are being
(NYLON INSERTED) conveyed.
For applications requiring more fabric strength
than neoprene C.I.
7635 RONSON ROAD SAN DIEGO, CALIFORNIA 92111 TEL: 858-278-3270 FAX: 858-278-2950
E-MAIL: [email protected] VISIT US AT: www.sandiegoseal.com
RUBBER MATERIAL
EPDM (EPM) 300F Resistant to: Animal and vegetable oils, ozone,
(EPR) strong & oxidizing chemicals.
SILICONE (SI) 400F Resistant to: Moderate or oxidizing chemicals,
ozone, concentrated sodium hydroxide.
VITON 450F Resistant to: All aliphatic, aromatic and
halogenated hydrocarbons, acids, animal
vegetable oils.
RED RUBBER 250F Resistant to: Hot or cold water and steam not
exceeding 100 psi
PURE GUM 225F Resistant to: Most moderate chemicals wet or
dry, organic acids, alcohols, ketones, aldehydes.
RUBBER Neoprene Closed cell, open cell
SPONGE -70 - +200
Materials: Neoprene, Nitrile, EPDM, Silicone.
EPDM
-90 - +275 Available in: Stripping w/adhesive back, Rolls,
sheets, pads
Nitrile
(Buna-n)
-40 - +200
7635 RONSON ROAD SAN DIEGO, CALIFORNIA 92111 TEL: 858-278-3270 FAX: 858-278-2950
E-MAIL: [email protected] VISIT US AT: www.sandiegoseal.com
VARIOUS MATERIALS
CORK and 225F Attributes
RUBBER Tight tolerances
Heat, oil, fuel and solvent resistant
Cushioned resilience for mountings
High co-efficient of friction (skid-resistance)
Sound and vibration absorbing
Low and high bolting pressure
VEGETABLE 250F Resistant to: Fuels, heating oils, automotive
FIBER coolants, water and salt solutions
FELT 200F Typical uses
Vibration mounts precision channels, oil seals,
bumpers, gaskets, and
lubricator wicks.
Automotive, aircraft, machine components.
FLOOR MATTING
STYLES AVAILABLE
Military Grade Diamond Switchboard Matting
Federal Spec Corrugated Matting
Corrugated Matting
Conductive Matting
Vinyl
Safety Edge Diamond Plate
Smooth Switchboard Matting
CHUTE LINING TYPICAL APPLICATIONS
Available Hardnesses
40 and 60 shore A lining to protect surfaces in hoppers, bins,
silos, vibrators, conveyors, hydro cyclones,
slides and chutes.
7635 RONSON ROAD SAN DIEGO, CALIFORNIA 92111 TEL: 858-278-3270 FAX: 858-278-2950
E-MAIL: [email protected] VISIT US AT: www.sandiegoseal.com
PTFE MATERIAL
Common or Max. Temp* Application
Trade Name
(ASTM Reference)
VIRGIN PTFE Excellent chemical resistance (0-14 pH)
VIRGIN PTFE
SHEETS 500F High mechanical strength, electrical properties, low coefficient of
ROLLS
PRE CUT
1400 PSI friction and non-stick properties.
GASKETS
ENVELOPE MECHANICAL FDA Approved
GASKETS GRADE
RINGS 400F (Mechanical grade PTFE also available)
ROD, TUBE and
BAR STOCK 1000 PSI
O-RINGS
EXPANDED -450F to Excellent chemical resistance (0-14 pH)
PTFE +600F
Excellent resistance to creep and cold flow.
(GORE-TEX) 3000 PSI
JOINT SEALANT Very low stress-to-seal
GR SHEET
GASKET TAPE Easily conforms to irregular surfaces
UNIVERSAL PIPE
GASKET
DYNA-CORE FDA Approved
ONE UP PUMP
DIAPHRAM
GLASS FILLED 500F Excellent chemical resistance (0-14 Ph)
PTFE 1235 psi
Biaxially oriented hollow glass filled ptfe sheet.
(BLUE) This material has high tensile strength and exhibits superior creep
resistance.
FDA Approved
BARIUM 500F Excellent chemical resistance (0-14 Ph)
SULPHATE 1235 psi
Biaxially oriented barium sulphate filled ptfe sheet.
FILLED This material has high tensile strength and exhibits superior creep
PTFE resistance.
(OFF-WHITE)
FDA Approved
SILICA FILLED 500F Excellent chemical resistance (0-14 Ph)
PTFE 1235 psi
Biaxially oriented silica filled ptfe sheet.
(FAWN) This material has high tensile strength and exhibits superior creep
resistance.
FDA Approved.
7635 RONSON ROAD SAN DIEGO, CALIFORNIA 92111 TEL: 858-278-3270 FAX: 858-278-2950
E-MAIL: [email protected] VISIT US AT: www.sandiegoseal.com
JACKETED GASKET STYLES
METALS:
STAINLESS STEEL
Single Jacket COPPER
The most basic form of jacketed gasket, with SOFT IRON
coverage on one face and both edges. BRASS
MONEL
INCONEL
Single Jacket with Overlap (OTHER MATERIALS ON REQUEST)
Where full coverage is needed and flange is
narrow relative to gasket ID.
Double Jacket FILLERS:
Where full coverage is needed and flange is NON-ASBESTOS
wide relative to gasket ID. FLEXIBLE GRAPHITE
CERAMIC
PTFE
Double Jacket with Double Shell CORRUGATED METAL
Stronger and more rigid than double jacket
gasket.
Double Gasket Corrugated
Corrugations create a labyrinth seal across the
gasket face.
STANDARD SHAPES FOR
SOLID GASKET STYLES HEAT EXCHANGER GASKETS
Flat Solid
Cut from sheet metal, these gaskets can be of
unlimited size and shape. mating surfaces need
to be perfectly aligned and flat for metal
gaskets to provide good seals.
Profiled and Serrated
A solid gasket with surface grooves facilitating
a good seal with lower seating stresses. These
styles can be jacketed to protect the flange
surfaces.
Corrugated
Made from thin metal, these gaskets provide a
seal at low seating stress. They may be surface-
treated with ceramic, non-asbestos or flexible
graphite, or they may be used with a teflon
envelope.
7635 RONSON ROAD SAN DIEGO, CALIFORNIA 92111 TEL: 858-278-3270 FAX: 858-278-2950
E-MAIL: [email protected] VISIT US AT: www.sandiegoseal.com
