Scribd
Upload
139 views

Lab Sheet For IESL Students Lab 3

This document discusses how geographical factors affect individual wind turbine performance at the Pawandhnavi wind farm site. It introduces equations to calculate wind speed at a given height based on surface roughness. The methodology involves visiting turbine locations, gathering surrounding information, observing standard power curves, and developing site-specific performance curves for selected turbines. The discussion compares the site-specific curves to analyze geographical factors affecting deviations, and identifies the best locations to replace existing turbines with GE 1.5 XLE turbines, justifying selections and calculating monthly energy production.

Uploaded by

TharakaKaushalya
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
139 views

Lab Sheet For IESL Students Lab 3

This document discusses how geographical factors affect individual wind turbine performance at the Pawandhnavi wind farm site. It introduces equations to calculate wind speed at a given height based on surface roughness. The methodology involves visiting turbine locations, gathering surrounding information, observing standard power curves, and developing site-specific performance curves for selected turbines. The discussion compares the site-specific curves to analyze geographical factors affecting deviations, and identifies the best locations to replace existing turbines with GE 1.5 XLE turbines, justifying selections and calculating monthly energy production.

Uploaded by

TharakaKaushalya
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

Understand the geographical factor affecting the individual turbine performance in the

Pawandhnavi site Lab - 3

Objectives : familiarise the environmental factors affecting the wind turbine performance at a
site .

Introduction

At a height of above the 1 kilometre the wind is barely affected by the surface of the earth. In
lower atmospheric layers the wind speed is affected by the friction against the earth's surface.
The more significant the roughness of the ground surface, the more the wind will be slowing
down. Tall trees in woods and forests and large buildings in the cities slow the wind
considerably. Concrete runways in airports and road surfaces will marginally slow the wind .
Water surfaces are smoother than concrete runways, and will have lesser effect on the wind.
Notations
V ref= Wind speed at refence height
zref = reference height
z= height
Zo=serface roughness factor
Vz= wind speed at required height

Theory

Following equations may be used to calculate the velocity at required height.


ln

() =
ln

Methodology:

1. Visit the turbine locations.


2. Gather the surrounding information of wind turbine area ( refer the attachment 1 and
attachemnt2)
3. Observe and understand the standard power curve for the G 58 wind turbine
4. Develop the site reference performance curves for the selected wind turbine ( No
1,3,7,12)

Discussion

1. Discuss the changes in the site specific wind turbine curves for each turbine and critically
analyse the geographical factors which you observe during the site visit that affect the
deviation of the selected wind turbines.
2. The management of Pawandhnavi decided to change the gamesa G 58 turbines with GE
1.5 xle turbine. Instead of 12 , 7 , 1.5MW GE turbine will be fixed. You are required to
identify the best places to fix ( critically justifying your selection) those turbine from
existing loactions and annual average energy production of each month by the plant with
GE turbines. ( students are required to assume the surface roughness of the area, to
calculate the wind velocity use the locations wind data of each month at height of 65 m)

GE 1.5 xle wind turbine data.


Attachments

You might also like