OPTICAL SYSTEMS LASERS & MATERIAL PROCESSING INDUSTRIAL METROLOGY TRAFFIC SOLUTIONS DEFENSE & CIVIL SYSTEMS
HOMMEL-MOVOMATIC DP200Bus
Digital gauge head for locating axial position
Precision is our business.
HOMMEL-MOVOMATIC DP200Bus
Reliable and precise axial location of workpiece shoulders
Gauging range without readjustment The DP200Bus gauge head has been designed by
2000 m Hommel-Movomatic to locate the axial position
of a wide range of uninterrupted or interrupted
For interrupted or uninterrupted workpieces as an integrated part of a production
surfaces line (pre-process, in-process) or for downstream
quality control (post-process). It has been developed
Central position, measurement for users who demand the best in terms of efficient
on the left or on the right without metrology, ruggedness and ease of use. The DP200Bus
mechanical adjustment axial positioning head enables manufacturers to cut
production times while improving the quality of their
Quick adjustment, easy setting machined products and the consistency of their results
by eliminating dimensional variations.
Break away gauge arm
for crash prevention
Integrated electronics and data
transmission using Digital Bus
Main characteristics 1. Quick
adjustment, easy setting
It is user friendly and quick setup using one single hex key.
20 105
4.5
47
25
90
100/120
/5
62/82
M4
12x
2. Break
away gauge arm for crash prevention
Effective on impact from any direction.
3 No damage to workpiece, gauge head or its arm.
202
34
47.98
40
Dimensions in mm
3. Excellent metrological performances
The DP200Bus is capable of detecting the axial position
26
of uninterrupted or interrupted surface shoulders with a
measurement range of 2000 m. The 6 repeatability
error under standard conditions is less than 0.3 m.
18
Dimensions in mm
4. Integrated electronics and
data transmission using Digital Bus
One single transmission cable utilizing a standard
connector for all measurement functions, including:
electronic data acquisition and engagement/
disengagement of gauge arm.
Programmable parameters for optimizing measurements
(can be saved in the gauge head).
Connection of two or more gauge heads in parallel,
using only one input connector on the control electronics.
5. Compatibility with a range of electronic gauging and control systems
The DP200Bus gauge head is compatible with each of the following gauging and control electronics.
ESZ400
Digital Bus Basic system
Main module with
Profibus and a
maximum of 2 digital
gauge heads.
Profibus
24 VDC
ESZ400
Digital Bus Extended system
Main module with
Profibus, a maximum
of 16 digital gauge
heads, input/output
modules and input
modules for analogue
sensor channels.
Max. 32 analogue inputs
Max. 256 outputs
Max. 256 inputs
85 to 265 VAC
Profibus
24 VDC
ESi400
Digital Bus Maximum 8 digital
PC-based gauge heads with
operator panel HMI interface.
Ethernet/Serial RS232
Profibus
I/O
CNC/PLC
ES400
Digital Bus Maximum of 8 digital
gauge heads.
ES124
Digital Bus Maximum of 2 digital
gauge heads.
Mechanical and metrological characteristics
Gauging range without readjustment 2000 m
6 repeatability error under standard conditions < 0.3 m
Thermal drift for steel (coefficient of linear expansion 11x10-6/K) < 0.1 m/K
Gauging force on tip contact:
- Over half-range of 1000 m 1.5 N 10%
- Over full range of 2000 m 1.5 N 20%
Vibration absorption Viscous type
Two mechanical stops Adjustable (over entire range)
Gauge arm mechanical adjustment system Quick-acting
Crash-safety feature Break away gauge arm on impact with no
mechanical damage
Gauge arm electrical engagement / disengagement and Motorized
reversing feature - Central position, measurement on the left
or on the right
Ingress protection IP65
Electrical/electronic features
Number of sensors 1
Type of sensor Inductive LVDT
Functions of onboard circuitry - Sensor power supply
- Analogue/Digital A/D conversion
- Transmission of gauging value
- Activation of gauge arms engagement /
disengagement and reversal status feedback
- Command transfer
- Programmable parameters
- SECTO memories
Transmission mode of the gauging signal Digital serial Bus
Number of connecting cables One single cable for:
- Gauge head power supply
- Transmission of measurement data
- Command transfer/configuration
Type of cable connection By standard watertight connector
Cable type Heavy duty PUR
Our global presence.
Germany Spain Mexico
France Czech Republic China
Switzerland United States South Korea
India
Group companies, affiliates and
representation worldwide
www.hommel-etamic.com
10037833 - May 2009
Subject to change without notice
