PIPING (MIN.

) DIMENSION (1/2" TO 24" BUTT WELD)

INPUT SIZE = 3
A = 88.9 L = 114.0 A = 51.0 XXX ,SCH.160, = 65.0
J = 88.1 S = 76.0 J = 47.3 86 89.0 54.0 SCH. 40, 80 = 50.0

A= 44.5
J= 44.1

PIPE 90 ELBOW 45 ELBOW TEE REDUCER CAP MIN. SHORT PIPE

A= 165.0 A= 123.1
175.0 172.0 200.0 J= 161.3 J= 114.2
L 228.0 BRANCH M
X 3 86 A= 174.12
X 2 1/2 83 J= 161.49
X 2 76
X 1 1/2 73
X - -
X - - A= 72.1
X - - J= 66.9

203.0
A= 102.0
J= 94.6 A= 116.7
LAP JOINT 90 ELBOW REDUCER 90 ELBOW RED. + TEE + 90ELBOW + 45ELBOW J= 114.1

D E F G H J K
75.0
N
75.0

C B

BOSS 1B BOSS 1B
SO SHORT PIPE W.N. SO SHORT PIPE W.N. 90 ELBOW SO SHORT PIPE ST. TEE W.N. ST. TEE MAX MAX
90 ELBOW
S.O. SHORT PIPE W.N. SHORT PIPE

RAT I N G J. I. S. A. N. S. I.
10K 20K 30K 125/150 300 600 300 600 900 1500 2500
MARK
RF RF RF FF RF RF RJ RJ RJ RJ RJ
A 185.0 200.0 210.0 191.0 210.0 210.0 210.0 210.0 241.0 267.0 305.0
B 18.0 22.0 28.0 24.0 29.00 38.4 37.0 40.0 46.5 56.0 76.6
C 18.0 34.0 44.0 30.0 43.00 52.4 - - - - -
D 68.0 84.0 94.0 80.0 93.00 102.0 - - - - -
E - - 73.0 69.8 79.40 88.9 87.4 90.5 109.6 125.6 177.8
F 182.0 198.0 208.0 194.0 207.00 217.0 - - - - -
G - - 187.0 184.0 194.00 203.0 202.0 205.0 224.0 240.0 292.0
H 154.0 170.0 180.0 166.0 179.00 188.0 - - - - -
J - - 159.0 156.0 165.00 175.0 173.0 176.0 195.0 211.0 264.0
K 95.0 110.0 120.0 105.0 120.00 130.0 - - - - -
N - - 150.0 145.0 155.00 165.0 165.0 165.0 185.0 200.0 255.0
LONG - - - J150,A152 J150,A152 - J157.92,A159.92 - - - -
L
SHORT - - - J65 J65 - J79.92 - - - -
DIA. OF BOLTS M16 M20 M20 5/8 3/4 3/4 3/4 3/4 7/8 1 1/8 1 1/4
NO. OF BOLTS 8 8 8 4 8 8 8 8 8 8 8
RING NO.
FLG. CLEARANCE

W W W W NOTE:
1. DIMENSIONS "A1","B1" AND "B2" ARE ACCORDANCE WITH
ANSI B16. 10-1973
2. DIMENSIONS "B2","L" AND "W" SHALL BE USED ONLY FOR
REFERENCE.
3. DIMENSIONS "A2" IS THE SUM OF "A1" SHOWN HEREIN
AND "X" SPECIFIED IN TABLE OF ANSI B16 10-1973.
L

4. DIMENSION "B2" OF CLASS 1500 AND 2500 IS IN

ACCORDANCE WITH MANUFACTORER'S STANDARD.

LEGED:
A1 = FOR RAISED FACE
A1 B1 A1 B1 A2 = FOR RING-JOINT
A2 B2 A2 B2 B1 = FOR BOLTED BONNET
B2 = FOR PRESSURE SEAL BONNET

GATE VALVE GLOBE VALVE

FLANGE END VALVE BUTTWELDING END VALVE FLANGE END VALVE BUTTWELDING END VALVE

GATE VALVE
CLASS 150# CLASS 300# CLASS 600# CLASS 900# CLASS 1500# CLASS 2500#
A1 B1 L W A1 B1 L W A1/B1 A2 L W A1/B1 A2 B2 (4) A1/B1 A2 B2 A1/B1 A2 B2 (4)
203 283 498 250 283 299 543 250 356 359 654 254 381 384 305 470 473 305
GLOBE VALVE
A1/B1 A2 L W A1 B1 L W A1/B1 A2 L W A1/B1 A1/B1 B2 A1/B1 A2 B2 A1/B1 A2 B2
241 254 411 250 318 334 438 250 356 359 597 305 381 384 305 470 473 470

NOTE:
1. DIMENSIONS "A1","B1" AND "B2" ARE ACCORDANCE WITH
LEGED: ANSI B16. 10-1973
L

A1 = FOR RAISED FACE 2. DIMENSIONS "B2" AND "L" SHALL BE USED ONLY FOR
A2 = FOR RING-JOINT REFERENCE.
B1 = FOR BOLTED BONNET 3. DIMENSIONS "A2" IS THE SUM OF "A1" SHOWN HEREIN
A1 B1 B2 = FOR PRESSURE SEAL BONNET AND "X" SPECIFIED IN TABLE OF ANSI B16 10-1973.
A2 B2 4. DIMENSION "B2" OF CLASS 1500 AND 2500 IN
ACCORDANCE WITH MANUFACTORER'S STANDARD.

CHECH VALVE
FLANGE END VALVE BUTTWELDING END VALVE

CHECK V A L V E
CLASS 150# CLASS 300# CLASS 600# CLASS 900# CLASS 1500# CLASS 2500#
A1/B1 A2 L A1/B1 A2 L A1/B1 A2 L A1/B1 A2 B2 A1/B1 A2 B2 A1/B1 A2 B2
241 254 170 318 333 190 356 359 230 381 384 305 470 473 305 570 584 368