Steps in Using Diskpart
Steps in Using Diskpart
1. Insert your USB flash drive to your running computer. As the first step, we
need to run Command Prompt as administrator. To do this, we need to find
cmd by typing 'cmd' in the search box on Windows Start Menu. After
search result for 'cmd' appears, right click on it and select "Run as
administrator".
2. Type 'diskpart' on Command Prompt (without quotes) and hit Enter. Wait
for a while until the DISKPART program run.
3. Type 'list disk' to view active disks on your computer and hit Enter. There
would be seen that the active disks shown as Disk 0 for hard drive
and Disk 1 for your USB flashdrive with its total capacity.
4. Type 'select disk 1' to determine that disk 1 would be processed in the
next step then hit Enter.
5. Type 'clean' and hit Enter to remove all of data in the drive.
6. Type 'create partition primary' and hit Enter. Creating a primary partition
and further recognized by Windows as 'partition 1'.
7. Type 'select partition 1' an hit Enter. Choosing the 'partition 1' for setting
up it as an active partition.
9. Type 'format fs=ntfs quick' and hit Enter. Formatting current partition as
NTFS file system quickly.
10. Type 'exit' and hit Enter. Leaving DISKPART program but don't close the
Command Prompt instead. We would still need it for next process.
2. Type 'cd boot' and hit Enter. Active directory changed to F:\boot>.
3. Type 'bootsect /nt60 d:' and hit Enter. Creating boot sector on D: drive
(USB flash drive).
4. Type 'exit' and hit Enter to close the Command Prompt. Until this step we
have made a bootable USB drive sucessfully, and the flash drive is ready to
be used as a boot media.