Scribd
Upload
29 views

S/N Description of MIE Requirement Remark 1 Type-1 Combined Slitting and Cut-To Length Line Quantity 01 Set

This document outlines the requirements for a Type-1 combined slitting and cut-to-length line. The line must be capable of slitting and cutting carbon and low alloy steel plates between 6-20mm thick and 2500mm wide. It must be able to process coils from 150-2500mm wide, 508-762mm inner diameter, and up to 40 metric tons. The vendor will specify detailed specifications, control systems, drive systems, and proposed layouts that meet these requirements.

Uploaded by

solquiha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
29 views

S/N Description of MIE Requirement Remark 1 Type-1 Combined Slitting and Cut-To Length Line Quantity 01 Set

This document outlines the requirements for a Type-1 combined slitting and cut-to-length line. The line must be capable of slitting and cutting carbon and low alloy steel plates between 6-20mm thick and 2500mm wide. It must be able to process coils from 150-2500mm wide, 508-762mm inner diameter, and up to 40 metric tons. The vendor will specify detailed specifications, control systems, drive systems, and proposed layouts that meet these requirements.

Uploaded by

solquiha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

S/N Description of MIE Requirement Remark

Type-1 Combined slitting and cut- to length line quantity =01 set
1
A) Purpose

Slitting and cut to length of carbon steels and low alloy steels Plates/materials

B) Technical Requirement

i) Basic Equipment: -
Should be capable to slit and cut to length coiled and blank plates of thickness from
6mm up to 20 mm and 2500mm width.

a) Material Specification Galvanized or black steel with 360N/mm^2


b) Thickness6 to 20mm
c) Coil width .150mm to 2500mm
d) Coil inner diameter 508 to 762
e) Max coil weight.40t
f) Heavy duty construction

More detail specifications and arrangement and proposed layout to be specified by


the Vendor
ii) Control system
control system with Detail features to be specified by the vendor with mentioning
model, make, complete details: -

a) Control unit with necessary features


b) Operator panel:
Operator control panel should display all control features of the system &
should have all push buttons, signal lamps, gauges, Knobs etc. for easy &
comfortable operation.
All details of operator Panel to be provided.

iii) Drive system

To be specified by the Vendor

Page 5 of 12

You might also like