Scribd
Upload
26 views

Session Function and Extracted Via The: Procedures

The document discusses the Polyline tool which allows users to trace lines on images. It can be accessed when opening 8-bit or 16-bit image files. The tool is selected and users can then enter parameters before clicking to start tracing a line on the image. Users trace the line by following it with the cursor while holding the left mouse button and end the line by right clicking to close and validate the tracing.

Uploaded by

maxidico
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
26 views

Session Function and Extracted Via The: Procedures

The document discusses the Polyline tool which allows users to trace lines on images. It can be accessed when opening 8-bit or 16-bit image files. The tool is selected and users can then enter parameters before clicking to start tracing a line on the image. Users trace the line by following it with the cursor while holding the left mouse button and end the line by right clicking to close and validate the tracing.

Uploaded by

maxidico
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

6.

THE POLYLINE TOOL

You can access the Polyline tool by opening :


- a 8 bit file (Disc Options / Open 8 bit File);
- a 16 bit file (Contour Treatment / Open Memory Session);
- a 8 bit file and a 16 bit file at the same time (Contour Treatment / Open Memory Session);
- a 8 bit file and a 16 bit file at the same time loaded via the Contour Treatment / Open Disk
Session function and extracted via the tool.

THE POLYLINE TOOL


This tool allows the user to trace lines.

Procedures

1/ Open a 8 bit file (.ic1 or .img) (Disc Options / Open 8 bit File) or a 16 bit file (.ic2 or .geo)
(Contour Treatment / Open Memory Session) or both at the same time via the Contour
Treatment / Open Memory Session function or by selecting the Contour Treatment / Open
Disk Session function and then by extracting a zone via the tool (See the Scissors tool).

2/ Select the tool by clicking (8 left button) directly over its icon
3/ The following parameter configuration box opens :

Enter the Flag value, the Line thickness and the speed of the automatic click (Autoclick).
See the Flag Tool section for more details about the other parameters.
4/ Validate and close the box via the OK button.
5/ Select the tool by clicking (8 left button) directly over its icon. The pointer takes a L
form.
6/ Set the cursor on the beginning of the line to trace and click left. Follow the line with the
cursor (8 left button). When finished a particular section, click (8 right button) in order to
close the drawing and valid the operation.
The line is traced.

ICS Map Server5.x - The Tools - Section 4 page 12

You might also like