Scribd
Upload
305 views4 pages

LM565 & LM566

The LM565 and LM565C are phase locked loop integrated circuits containing a stable and linear voltage controlled oscillator (VCO) for low distortion FM demodulation and a double balanced phase detector. The VCO frequency can be set with an external resistor and capacitor to provide a tuning range of 10:1. The characteristics of the closed loop system such as bandwidth, response speed, and capture range can be adjusted over a wide range using external components. The LM565H is specified for operation from -55°C to +125°C and the LM565CN is specified for 0°C to +70°C operation.

Uploaded by

Owais Afzal Jan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
305 views4 pages

LM565 & LM566

The LM565 and LM565C are phase locked loop integrated circuits containing a stable and linear voltage controlled oscillator (VCO) for low distortion FM demodulation and a double balanced phase detector. The VCO frequency can be set with an external resistor and capacitor to provide a tuning range of 10:1. The characteristics of the closed loop system such as bandwidth, response speed, and capture range can be adjusted over a wide range using external components. The LM565H is specified for operation from -55°C to +125°C and the LM565CN is specified for 0°C to +70°C operation.

Uploaded by

Owais Afzal Jan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

LM565

The LM565 and LM565C are general purpose phase locked loops
containing a stable, highly linear voltage controlled oscillator for low
distortion FM demodulation, and a double balanced phase detector with
good carrier suppression. The VCO frequency is set with an external
resistor and capacitor, and a tuning range of 10:1 can be obtained with
the same capacitor. The characteristics of the closed loop system
bandwidth, response speed, capture and pull in rangemay be adjusted
over a wide range with an external resistor and capacitor. The loop may
be broken between the VCO and the phase detector for insertion of a
digital frequency divider to obtain frequency multiplication. The LM565H is
specified for operation over the 55C to +125C military temperature
range. The LM565CN is specified for operation over the 0C to +70C
temperature range.

Features:
200 ppm/C frequency stability of the VCO
Power supply range of 5 to 12 volts with 100 ppm/% typical
0.2% linearity of demodulated output.
Linear triangle waves with in phase zero crossings available
TTL and DTL compatible phase detector input and square wave
output
Adjustable hold in range from 1% to > 60%

Applications:
Data and tape synchronization
Modems
FSK demodulation
FM demodulation
Frequency synthesizer
Tone decoding
Frequency multiplication and division
SCA demodulators
Telemetry receivers
Signal regeneration
Coherent demodulators
Connection Diagrams:

Metal Can Package

Dual-in-Line Package
LM566
The LM566CN is a general purpose voltage controlled oscillator which may
be used to generate square and triangular waves, the frequency of which
is a very linear function of a control voltage. The frequency is also a
function of an external resistor and capacitor. The LM566CN is specified
for operation over the 0C to +70C temperature range.

Features:
Wide supply voltage range: 10V to 24V
Very linear modulation characteristics
High temperature stability
Excellent supply voltage rejection
10 to 1 frequency range with fixed capacitor
Frequency programmable by means of current, voltage, resistor or
capacitor

Applications:
FM modulation
Signal generation
Function generation
Frequency shift keying
Tone generation

Connection Diagram:
Dual-in-Line Package

You might also like