Scribd
Upload
1K views

Solution of Assignment 1

This document contains solutions to communication system assignment problems. It finds: (1) the carrier swing, highest and lowest frequencies, and modulation index of a frequency modulated signal; (2) the modulation index of another FM signal; (3) the carrier swing, carrier frequency, and frequency deviation of a third FM signal; and (4) transmission rates for different modulation schemes transmitting a message with error detection.

Uploaded by

Hammad Hussain
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
1K views

Solution of Assignment 1

This document contains solutions to communication system assignment problems. It finds: (1) the carrier swing, highest and lowest frequencies, and modulation index of a frequency modulated signal; (2) the modulation index of another FM signal; (3) the carrier swing, carrier frequency, and frequency deviation of a third FM signal; and (4) transmission rates for different modulation schemes transmitting a message with error detection.

Uploaded by

Hammad Hussain
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Communication System II

(Solution of Assignment number 1)

1. A 107.6-MHz carrier is frequency modulated by a 7-kHz sine wave. The resultant FM signal has
a frequency deviation of 50kHz. (a) Find the carrier swing of the FM signal. (b) Determine the
highest and lowest frequencies attained by the modulating signal. (c) What is the modulation index
of the FM wave? [Note: Carrier swing is double of the maximum deviation (c.s. = 2f)]

1
Syed Muneeb Ahmed
2. What is the modulation index of an FM signal having a carrier swing of 100 kHz when the
modulating signal has a frequency of 8 kHz?

2
Syed Muneeb Ahmed
3. A frequency modulated signal which is modulated by a 3-kHz sine wave reaches a maximum
frequency of 100.02 MHz and minimum of 99.98 MHz (a) Determine the carrier swing. (b) Find the
carrier frequency. (c) Calculate the frequency deviation of the signal. (d) What is the modulation
index of the signal?

3
Syed Muneeb Ahmed
4. We wish to transmit a 100-character alphanumeric message in 2 seconds, using 7-bit ASCII
coding, followed by an eighth bit for error detection per character. The eighth bit is chosen so that
the number of ones in the 8 bits is an even number. A multilevel PAM waveform with M=32 levels
is used.
(a) Calculate the effective transmitted bit rate and the symbol rate.
(b) Repeat part (a) for 16-level PAM, eight-level PAM, four-level PAM, and PCM (binary)
waveform.

Solution:

5. The information in an analog waveform, whose maximum frequency fm=4000Hz, is to be transmitted


using a 16-level PAM system. The quantization must not exceed 1% of the peak-to-peak analog signal.
(a) What is the minimum number of bits per sample or bits per PCM word that should be used in this
system?
(b) What is the minimum required sampling rate, and what is the resulting bit rate?
(c) What is the 16-ary PAM symbol Transmission rate?

Solution:

4
Syed Muneeb Ahmed

You might also like