PIPE/TUBE CUTTING & PREPARATION

Pipe/Tube Cutting & Preparation

Wide selection from a single source.
Durable designs.
Exclusive features for maximum productivity.

No. of Pipe Capacity

Type Page
Models in. mm
Pipe Reamers
Reamers 4 14 -4 8 - 100 3.2
Pipe Cutters
Heavy-Duty 7 18-6 3 - 150 3.2
4-Wheel 2 34-4 20 - 100 3.3
Wide Roll 1 18 - 2 3 - 50 3.3
Hinged 11 2 - 12 50 - 300 3.3
Soil Pipe 5 112 - 8 40 - 200 3.4
Replacement Cutter Wheels 21 _ _ 3.5
Power Pipe Cutting 4 212 - 12 65 - 300 3.6
Copper / Stainless Cut & Prep 1 12 -2 12 - 60 3.8
Tubing Cutters 33 18 - 658 3 - 171 3.10
Replacement Cutting Wheels 21 18 - 658 3 - 171 3.13
Plastic and Multilayer Cutters 8 18 - 238 3 - 60 3.14
Reamers, Deburring Tools 7 14 -4 6 - 100 3.17

3.1
 PIPE/TUBE CUTTING & PREPARATION

Pipe Reamers Pipe Reamers

Model 2-S Spiral Ratchet Reamer Self-feeding spiral design for extra-fast and easy hand reaming.
Model 2-S Reamer is not suitable for power reaming.
Models 2 and 3 Ratchet Reamers Long taper design will not dig in. Suitable for use with power
drives.
No. 2-S Model 254 Spiral Ratchet Reamer Hollow center reduces weight. Large pressure plate. Hardened
alloy steel cone removable for sharpening. Not suitable for power reaming.

Catalog Model Capacity Weight Std. Replacement

Description
No. No. in. mm lb. kg Pack Cone Cat. No.
34955 2-S Spiral Reamer 14 -
2 6 - 50 714 3,3 1 35020
34945 2 Straight Reamer 18 -
2 3 - 50 7 3,2 1 34975
34950 3 Straight Reamer 38 - 3 9 - 75 1112 5,2 1 35090
No. 254 34960 254 Spiral Reamer 212 - 4 62 - 100 14 6,4 1 35135
No. 2 Note: All reamers include handle.

Pipe Cutters
Cutters

Pipe Cutter
Selection
Heavy-Duty 4-Wheel Wide-Roll Hinged Soil Pipe
Page 3.2 Page 3.3 Page 3.3 Page 3.3 Page 3.4

Steel / Stainless 3 3 3 3
Material / Diameter

- 6"
18" - 4"
34" 18"- 2" 2" - 12"

(3 - 150 mm) (20 - 100 mm) (30 - 50 mm) (50 - 300 mm)
Heavy-Wall Steel 3 3 3 3

112" - 8"
Cast Iron 3 (40 - 200 mm)

Heavy-Duty Pipe Cutters

Fast, clean pipe cutting by hand or power.
Extra-long shank protects adjustment threads, while an extra-large handle is provided for
quick, easy adjustment.
Can be converted to 3-wheel cutter by replacing rollers with cutter wheel. The 2A and 4S
models can be ordered as a 3-wheel model for use in areas where a complete turn is not
Nos. 1-A & 2-A
possible.
Second handle on 3-S, 4-S and 6-S models make two-man leverage possible on large pipe
sizes.

Pipe Capacity*
Catalog Model Weight
Pipe Cutter Description Nominal Size
No. No.
in. mm lb. kg
32810 1-A Heavy-Duty 18 - 114 3 - 32 612 3,0
32820 2-A Heavy-Duty 18 - 2 3 - 50 7 3,2
32825 2-A 2-A 3-Wheel Heavy-Duty 18 - 2 3 - 50 7 3,2
32830 3-S Heavy-Duty 1-3 25 - 80 15 6,9
32840 4-S Heavy-Duty 2-4 50 - 100 18 8,2
Nos. 3-S, 4-S & 6-S
32845 4-S 4-S 3-Wheel Heavy-Duty 2-4 50 - 100 18 8,2
32850 6-S Heavy-Duty 4-6 100 - 150 22 10,0
* Pipe capacity = maximum nominal diameter of steel pipe

3.2
 PIPE/TUBE CUTTING & PREPARATION

4-Wheel Pipe Cutters

Designed for work in areas where a complete turn is impossible.
Model 42-A has a short handle for use in confined areas.
Second handle on Model 44-S makes two-man leverage possible for large pipe sizes.
No. 42-A Both models are equipped with four heavy-duty wheels.

Pipe Capacity**
Catalog Model Weight
Pipe Cutter Description Nominal Size
No. No.
in. mm lb. kg
32870 42-A Heavy-Duty 4-Wheel 34 - 2 20 - 50 634 3,1
32880 44-S Heavy-Duty 4-Wheel 212 - 4 65 - 100 20 9,1
No. 44-S

Wide-Roll Pipe Cutter

Featuring extra-wide rolls, this cutter is especially designed for use with power drives.
The wide rolls provide for true tracking and cleaner cuts.

Pipe Capacity**
Catalog Model Weight
Pipe Cutter Description Nominal Size
No. No.
No. 202 in. mm lb. kg
32895 202 Heavy-Duty Wide Rolls 18 - 2 3 - 50 8 3,5

Hinged Pipe Cutters

Designed for rapid cutting of 2" (50 mm) to 12" (300 mm) steel pipe, heavy-wall steel pipe
and cast-iron pipe.
The 11 models operate with minimal cutter rotation as necessary for tight quarters.
Second handle included for 466, 472 and 468 makes two-man leverage possible for large
pipe sizes.

Pipe Capacity**
Catalog Model Weight
Pipe Cutter Description Nominal Size
No. No.
in. mm lb. kg
73162 424-S* For Steel Pipe 2-4 50 - 100 1312 6,0
74227 424-CI For Cast/Ductile Iron 2-4 50 - 100 1312 6,0
90995 466-D For SML Pipe 3-6 80 - 150 29 13,0
83080 466-S* For Steel Pipe 4-6 100 - 150 2812 13,0
83085 466-HWS* For Heavy-Wall Steel Pipe 4-6 100 - 150 2812 13,0
74685 466-CI For Cast-Iron Pipe 4-6 100 - 150 2812 13,0
83145 468-S* For Steel Pipe 6-8 150 - 200 33 15,0
83150 468-HWS* For Heavy-Wall Steel Pipe 6-8 150 - 200 3312 15,2
74700 468-CI For Cast-Iron Pipe 6-8 150 - 200 3312 15,2
83165 472-S* For Steel Pipe 8 - 12 200 - 300 4112 19,0
83170 472-HWS* For Heavy-Wall Steel Pipe 8 - 12 200 - 300 42 19,1
74710 472-CI For Cast-Iron Pipe 8 - 12 200 - 300 42 19,1
* Furnished with X-tra sharp wheel for up to 40% faster cutting.
* *Pipe capacity = maximum nominal diameter of steel pipe

Three- and four-wheel pipe cutters should only be used when the cutter cannot be rotated completely around the pipe.

3.3
 PIPE/TUBE CUTTING & PREPARATION

Soil Pipe Cutters

No. 226 In-Place Soil Pipe Cutter

The RIDGID Model 226 In-Place Soil Pipe Cutter is a compact, lightweight tool designed to cut hub
1" (40 mm) to 6" (150 mm) and No-Hub soil pipe in tight quarters.
Only 17" (43 cm) long, the Model 226 is perfect for cutting cast iron, cement and clay pipe where
space is limited.
The Model 226 is especially suited for against-the-wall and other tight quarter applications.
From the Model 226s compact design to its unique chain latching mechanism, every feature has
been engineered for maximum productivity.

No. 246, 246S, 246L & 248 Soil Pipe Cutters

Model 246 soil pipe cutters cut 2" (50 mm) to 12" (300 mm) clay, cast-iron or cement pipe.
Ratchet-action handle parallel to pipe allows for application in minimum width trenches.
Complete with hand guard to protect operators knuckles when cutting.
Model 248 has larger diameter cutting wheels and a longer handle. Designed to cut up to 18"
(450 mm) concrete / clay pipe.

No. 228 Soil Pipe Assembly Tool

Handles all 1" (40 mm) to 8" (200 mm) gasketed soil pipe without extra, loose attachments.
Easy assembly of Y, tee and elbow fittings, as well as straight lengths from any angle.
Slim, compact design lets one man assemble even large sizes quickly and easily.
Removal of handle facilitates vertical and overhead pipe assembly.

Ordering Information
Capacity Weight Replmt.
Catalog Std.
Model No. Description Chain
No. in. mm lb. kg Pack
Cat #
69982 226 In-Place Soil Pipe Cutter 112 - 6 40 - 150 18 8,2 1 33670
32900 246 Soil Pipe Cutter 112 - 6 40 - 150 25 11,3 1 34575
14991 246S Soil Pipe Cutter 2-8 50 - 200 26 12 1 1*
10531 246L Soil Pipe Cutter 2 - 12 50 - 300 33 15 1 2*
62797 248 Soil Pipe Cutter 2 - 18 50 - 450 42 19 1 63287
32905 228 Soil Pipe Assembly Tool 112 - 8 40 - 200 2234 10,3 1
1*= 34575 + 2 x 34570 / 2*= 2 x 34575

3.4
 PIPE/TUBE CUTTING & PREPARATION

Pipe Cutter Replacement Wheels

Always use genuine RIDGID cutter wheels. These
wheels are precision-machined from high-grade steel
and are engineered for long life and maximum cutting
accuracy.
LONG LIFE Blade Exposure
CUTTER WHEELS
Catalog No.

32900/43547

42390/34617
32810
32820
32830
32840
32850
32870
32880
32895
68650
32860
32865
69982

62797
42370
73162
74227
74685
90995
83080
83085
74700
83145
83150
74710
83165
83170

58657
52452
26212
Pipe Cutters
(Original Product)

820/364(535/1822)
Model
Model No.

732(1215)
763(1233)
764(1224)
466HWS

468HWS

472HWS
246/266

424CI

466D
424S

466C

466S

468C
468S

472C
472S
42A
44S
202
206
208
209
226

248
360
1A
2A
3S
4S
6S

Catalog Model Standard Blade Application/

No. No. Pack Exp. Material
33220 E-109 1 9.0 Cast Iron

44185 E-1032 6 11.0

Steel Pipe & Ductile Iron
44190 E-1032S 6 11.0 S.S. Pipe
10026 E-10817 1 17.5 SML Pipe

33135 E-1962 1 6.5

Grey Cast Iron

33225 E-2632 1 6.0 Cast Iron

83140 E-3186 1 17.0

Steel & Ductile Iron HW

75557 E-4266 4 16.9

Heavy Wall Steel
Cutter Wheels

75572 E-2267 4 10.0

Cast & Ductile Iron

33105 F-3 12 7.5

Steel & Ductile Iron
33110 F-3S 6 7.5 S.S. Pipe
33115 F-119 1 3.0 Grey Cast Iron
33125 F-229 6 10.0


Steel & Ductile Iron
33130 F-229S 6 10.0 S.S. Pipe
75567 F-366 4 9.5 Steel Pipe
33145 F-367 1 11.5 Steel & Ductile Iron
33150 F-367-S 1 11.5 S.S. Pipe
33155 F-383 1 6.5 Grey Cast Iron
33100 F-514 6 7.5
Steel & Ductile Iron

33120 F-515 6 10.0 Steel & Ductile Iron

75562 F-546 4 11.0

Steel Pipe

63297 AC-1586 1 6.2 Concrete Pipe

Denotes Cutter Wheels furnished with original product. Denotes alternate Cutter Wheel * Blade exposure = Thickness in mm.

3.5
 PIPE/TUBE CUTTING & PREPARATION

Power Pipe Cutters

Power Pipe Cutter / Model 258
212" (65 mm) to 8" (200 mm) Diameter Pipe
The RIDGID Model 258 Power Pipe Cutter cuts 212" (65 mm) to 8" (200 mm) schedule 10*/40 steel
pipe, galvanized pipe, rigid conduit, etc. at the job site or in the shop. Powered by the RIDGID No. 700
Power Drive, the 258 is a displacement cutter that provides square cuts. The operator controls the
feeding rate by pumping the hydraulic foot pump throughout the operation. A square cut with minimal
burr on either 6 m or nipple lengths of pipe is achieved quickly** without abrasive dust, sparks, or
open flame. Also, the RIDGID Pipe Roller for beveling can be used to rotate the pipe while a second
operator uses a grinder to bevel the pipe. Some of the 258 advantages are:
Square cut 6 m or nipple lengths of pipe without effort.
Easily cuts by displacing instead of removing pipe material.
No abrasive dust, dangerous sparks, or open flame.
Quickly cuts steel pipe with minimal burr.
Great for cutting pipe for groove joining.
Heavy-duty design is perfect for field or shop use.
Adaptable for beveling.
Specifications
Cutting Capacity: 212" (65 mm) to 8" (200 mm) schedule 10*/40 steel pipe.
Model 700 Power Drive (included with Cat No. 17871 and 17881).
Power Drive RPM: 26-30 (no load).
Weight: 105 lbs. (48 kg) (excludes No. 700 Power Drive, see page 4.15).
Standard Equipment
One RIDGID 774 Square Drive Adapter.
One 812" (215 mm) HD Cutter Wheel Assembly.
One Hydraulic Ram and Foot Pump.
Two 212" (65 mm) to 12" (300 mm) Ball Transfer Pipe Supports.
*Use the thin wall cutter wheel for best results.
**Cutting time varies with pipe schedule and diameter.
Note: Model 258 is not recommended to cut cast iron pipe.
For optimum wheel life always properly support the work piece with ball transfer pipe supports (see
accessories on page 3.7).

Model 700 ready for mounting on Model 258 Unit, see Model 258 with Pipe Roller in use for beveling. Two Model 258 Pipe Cutter with No. 700 Power Drive in use
page 4.15 operators are recommended for this operation for cutting

Do not overfill the hydraulic pump on power pipe cutters. Excess oil will purge out of seals on pump and ram.

3.6
 PIPE/TUBE CUTTING & PREPARATION

Power Pipe Cutter / Model 258XL

8" (200 mm) to 12" (300 mm) Diameter Pipe
The RIDGID 258XL offers 8" (200 mm) to 12" (300 mm) diameter pipe cutting capacity. Utilizing
displacement type cutter wheel technology, the design enables larger diameter pipe to be cut to
length. The 258XL also uses the RIDGID 700 Power Drive to rotate the heavy-duty cutter wheel. Now
one person can easily square cut 12" schedule 40 pipe in minutes.
Specifications
Cutting Capacity: Model 258XL: 8" (200 mm) to 12" (300 mm) schedule 10*/40 steel pipe.
Model 700 Power Drive (not included) RPM: 26 - 30 (no load).
Weight: 140 lbs. (63 kg) (excludes No. 700 Power Drive, see page 4.15).
Standard Equipment
One RIDGID 774 Square Drive Adapter.
One 812" (215 mm) H-D Cutter Wheel Assembly.
One Hydraulic Ram and Foot Pump.
Two 212" (65 mm) to 12" (300 mm) Ball Transfer Pipe Supports.
*Use the thin cutting wheel for best results.
Note: For optimum wheel life properly support the work piece with standard ball transfer pipe
supports (see below).

Capacity Inches
Weight
Catalog Max. Wall Thickness mm Std.
Model No. Description
No. Pack
Steel PVC Copper
lb. kg
8,2 12,7 3,1
50767 258 Pipe Cutter 212 - 8" 212 - 8" 212 - 6" 105 48 1
17871 258 / 700 258 Cutter with No. 700, 230V 212 - 8" 212 - 8" 212 - 6" 125 57 1
17881 258 / 700 258 Cutter with No. 700, 115V 212 - 8" 212 - 8" 212 - 6" 125 57 1
58227 258-XL Pipe Cutter 8 - 12" 145 66 1

Accessories
Catalog Weight
Model No. Description
No. lb. kg
66687 812" (215 mm) H-D Cutter Wheel Assembly 13 5,9
(includes HD Cutter Wheel, hub w/pins, cover plate)
Ball Transfer Pipe Support 50812 E-258 8" (215 mm) H-D Cutter Wheel only 2 0,9
58222 E258-T 8" (215 mm) Thin Wall Cutter Wheel Only (PVC and Steel) 2 0,9
54397 Transport Cart 24 11,0
Transport Cart 60002 258PS Ball Transfer Pipe Support 212" (65 mm) to 12" (300 mm) 21 9,5
60007 Replacement Ball Transfer Head Set 512 2,5
61757 Pipe Roller for Beveling (for Model 258 only) 13 5,9

Pipe Roller For Beveling

(Model 258 Only)

When using 258 and 258XL pipe cutters with long lengths of pipe, it is especially important to properly support the pipe to
prevent cutter wheel damage. Extra pipe supports may be needed and the work area must be level.

3.7
 PIPE/TUBE CUTTING & PREPARATION

Copper & Stainless Steel Cutting Prep Machine

Model 122 Capacity

12" (12 mm) to 2" (50 mm).
This machine is designed to cut, clean, ream, and debur copper and stainless steel tubing and fittings
quickly and professionally. Weighing only 23 kg and possessing a conveniently located carrying
handle, the Model 122 is ideal for transport directly to the job site. Rugged cast aluminum housing
and powerful 360 W induction motor assure long life.
Features
Powerful, 230 V, 360 W induction motor drives rollers at 450 RPM.
Rugged O.D. cleaning brush cleans tubing quickly with minimal effort.
Core reamer easily removes turbulence-causing burrs.
Cutting handle adjusts to accommodate different tubing sizes.
Copper cutter wheel tested to over 10.000 cuts.
Guide rollers ensure a straight cut with no tracking.
Large carrying handle for easy transport to the job site.
Built-in 12" (12 mm) incremental scale for quick, easy measuring.
The heavy-duty O.D. Cleaning Brush cleans the outside
diameter of 12" or 2" (12 - 54mm) tubing quickly and easily Fitting brush kit includes six brushes, storage rack and collet.
Technical Specifications
Motor: 230 V, 360 W, Induction Motor.
Roller Speed: 450 RPM.
Switch: Toggle On/Off.
Reamer: Single Flute Cone, 12" (12 mm) to 2" (50 mm).
Cutter Wheel: Model 2191 HD Wheel.
The Inner Reamer removes turbulence-causing burrs
quickly and effortlessly Standard Equipment
One O.D. Cleaning Brush.
One Core Reamer.
One Fitting Brush Storage Kit.

Catalog Model Weight

Description
No. No. lb. kg
96362 122 Stainless Steel / Copper Tube Cutting Machine 50 22,68
The optional fitting brush attachments can be used to
clean fittings fast
Accessories
Catalog Model Weight
Description
No. No. lb. kg
93717 12" Fitting Brush for 12 mm (3 Per Pack) 12 0,24
93722 34" Fitting Brush for 18 mm (3 Per Pack) 12 0,26
93727 1" Fitting Brush for 25 mm (3 Per Pack) 34 0,27
93732 114" Fitting Brush for 32 mm (3 Per Pack) 34 0,29
93737 112" Fitting Brush for 40 mm (3 Per Pack) 134 0,77
The optional Debur Disk is used to grind the O.D. edge to 93742 2" Fitting Brush for 50 mm (3 Per Pack) 134 0,79
help with tight fittings 94682 O.D. Cleaning Brush 1 0,44
46105 O.D. Debur Disk 114 0,57
93747 Quick-Change Collet 214 0,95
93712 Fitting Brush Holder 6 2,63
93707 Fitting Brush Storage Kit Includes Mountable Storage Rack, 3 1,39
Quick-Change Collet, Spare Cutter Wheel, and Brushes (12", 34",
1", 114", 112", 2")
33175 2191 Cutter Wheel for Copper 14 0,01
33551 122SS Cutter Wheel for Stainless Steel 14 0,01
34360 E-2192 Set of 10 pin screws
10343 Wheel Pin for 33551 Cutter Wheel (2 per pack) 14 0,01
42360 1206 1206 Stand 31 14,06
94687 2" Reamer Cone Assembly 116 0,02

3.8
 PIPE/TUBE CUTTING & PREPARATION

Tubing Cutters
Tubing Cutter Selection

Cutter

Close Quarters Tubing Enclosed Feed Tubing Screw Feed Tubing Quick Acting Plastic / Multilayer Pipe
Page 3.10 Page 3.11 Page 3.11 Page 3.12 Page 3.14

Steel / Stainless 3 3 3
Material / Diameter

Copper 3 3 3 3
(3 - 28 mm) (3 - 60 mm) (3 - 79 mm) (6 - 170 mm)
Plastic / PVC / Multilayer 3 3 3 3 3 (3 - 63 mm)

Aluminum 3 3 3 3

3.9
 PIPE/TUBE CUTTING & PREPARATION

Midget Cutters for Close Quarters Tubing

Specifically designed for use in restricted spaces on small diameter, hard and soft copper,
aluminum, brass and plastic tubing; rollers include grooves for close-to-flare cuts.
Strong, lightweight slide and wheel housing, large knurled feed screw knob gives easy control of
cutting pressure for clean cuts.
Models 117 and 118 include a self-feeding cutter wheel that automatically cuts after tightening the
knob only once (AUTOFEED).
The Model 118 features a special knob for easier tightening of the feedscrew.
Model 101 Model 101-ML is for multilayer tubing only.

Catalog Model Std. Capacity Weight Std.

Description
No. No. Wheel mm lb. kg Pack
NEW
40617 101 Midget Cutter* E-3469 6 - 28 12 0,23 6
32975 103 Midget Cutter E-3469 3 - 16 13 0,15 6
32985 104 Midget Cutter E-3469 5 - 24 13 0,15 6
97787 117 AUTOFEED Midget Cutter E-3469 5 - 24 13 0,15 12
32573 118 AUTOFEED 2-in-1 Midget Cutter E-3469 6 - 28 1116 0,48 1
(incl. Ratchet Handle)*
32933 118 Ratchet Handle only - for 118 and 58 0,26 1
101 Midget Cutters
21938 101-ML Midget Cutter for Multilayer E2155 6 - 28 13 0,15 6
tubing
* Models 101 and 118 include spare cutter wheel in knob.

AUTOFEED 2-in-1 Midget

Cutter

For best cutting results, change the cutters wheel pin at least once for every two cutter wheel replacements.

3.10
 PIPE/TUBE CUTTING & PREPARATION

X-CEL Means Speed

Many of our most popular tubing cutters now include several X-CEL features to make your job quicker and easier.
KNOB For Quicker
X-CEL Knob cut tubing more quickly and easily with our larger, more ergonomic designs. Cutting
X-CEL Wheel Pin change your cutter wheel quickly using our new ball detent designno tool neededno lost clips! PIN For Quicker
Wheel Change
Spare cutter wheels included for maximum uptime.
SPARE WHEEL IN KNOB

Enclosed Feed Tubing Cutters with New X-CEL Features

X-CEL Knob = quicker cut Telescoping feed screw design keeps the cutter at the same length regardless of tubing diameter
good for tight spaces.
Features an enclosed feed screw to eliminate clogging and jamming, grooved rollers for close-to-
Model 150L flare cuts, and a fold-away reamer.
Now includes X-CEL Knob and X-CEL Pin for quicker cutting and wheel replacement.
Spare wheel included Made from high-strength zinc alloy.
in knob
Spare cutter wheel included in the knob.
Cuts hard / soft copper, aluminium, brass and multilayer tubes.
X-CEL Pin = quicker wheel change
Model 205 / 205S have quick acting mechanism for faster size adjustments.

Grooved roller Catalog Model Std. Capacity Weight Std.

Description
No. No. Wheel mm lb. kg Pack
For Copper Tubing
66737 150L Enclosed Feed Cutter E-3469 6 - 35 1 0,44 6
33055 205* Ratcheting Encl. Feed Cutter E3469 6 - 60 2 0,91 1
For Steel Tubing
66742 150LS Above with Heavy Duty Wheel E4546 6 - 35 118 0,47 6

Model 205 33070 205S** Above with Heavy Duty Wheel E-4546 6 - 60 2 0,91 1
* Model 205 has an additional quick-acting mechanism
** Model 205S is suitable for stainless steel.

Fold-in reamer

Screw Feed Tubing Cutters with New X-CEL Features

X-CEL Knob = quicker cut Clean, square cuts are easily made on copper, brass, aluminum and thin-wall steel.
Now includes X-CEL Knob for quicker cutting.
Models 10, 15 and 20 feature a convenient fold-away reamer.
Models 65S and 35S are specially designed for stainless steel tubing. Includes 12x (65S) / 6x (35S)
individual bearings and a heavy duty cutter wheel to make stainless cutting easier.
Spare wheel included
in knob
Models 65S features a quick-acting mechanism.

Catalog Model Std. Capacity Weight Std.

Model 15 Description
No. No. Wheel mm lb. kg Pack
32910 10 Screw Feed Cutter F-158 3 - 25 78 0,40 6
32915 10S Above w/H-D Wheel (for steel) E-1240 3 - 25 78 0,40 6
32920 15 Screw Feed Cutter F-158 5 - 28 12 0,68 6
32925 15S Above w/H-D Wheel (for steel) E-1240 5 - 28 12 0,68 6
32930 20 Screw Feed Cutter F-158 16 - 54 134 0,79 1
32935 20S Above w/H-D Wheel (for steel) E-1240 16 - 54 134 0,79 1
32940 30 Screw Feed Cutter E-2558 25 - 79 312 1,60 1
32950 30S Above w/H-D Wheel (for steel) E-2191 25 - 79 312 1,60 1
97212 15-SI Stainless Steel Cutter E-1525 5 - 28 112 0,68 1
29963 35S Stainless Steel Cutter E-635 6 - 35 78 0,40 1
31803 65S Stainless Steel Quick-Acting Tubing E-635 6 - 65 112 0,68 1
No. 65S Cutter

3.11
 PIPE/TUBE CUTTING & PREPARATION

Quick-Acting Tubing Cutters with New X-CEL Features

Models 151-156 feature a quick-acting design, I-beam construction, hardened wear surfaces and
thrust bearing slide assemblies for smooth operation.
X-CEL Knob = quicker cut
All Models now include an X-CEL Knob and X-CEL Pin for quicker cutting and wheel replacement.
Available in models for plastic pipe or metallic tubing.
Models 151 and 152 feature fold-away reamers.
Model 151-ML is suitable for cutting multilayer tubing.
Spare wheel
included in knob Model 151 CSST is designed for cutting corrugated stainless steel tubing.

Catalog Model Std. Capacity Weight

Description Std. Pack
No. No. Wheel mm lb. kg
X-CEL Pin = quicker
wheel change 31632 151 Quick-Acting Cutter E-3469 6 - 42 114 0,56 6
Model 151
31637 151-P Above w/Wheel for Plastic E-2155 10 - 40 114 0,56 6
66747 151-ML Quick-Acting Tubing Cutter E-545 10 - 50 1 0,5 1
31642 152 Quick-Acting Cutter E-3469 6 - 66 2 0,92 1
31647 152-P Above w/Wheel for Plastic E-2155 10 - 63 2 0,92 1
36597 153 Quick-Acting Cutter E-3469 32 - 90 2 0,92 1
36592 153-P Above w/Wheel for Plastic* E-2155 25 - 75 2 0,92 1
31652 154 Quick-Acting Cutter E-2558 48 - 116 378 1,72 1
31657 154-P Above w/Wheel for Plastic* E-2156 50 - 110 378 1,72 1
59202 154-PE Above w/Wheel for PE pipe E2880 50 - 110 378 1,72 1
31662 156 Quick-Acting Cutter E-2558 100 - 170 5 2,23 1
31667 156-P Above w/Wheel for Plastic* E-2157 110 - 160 5 2,23 1
39957 156-PE Above w/Wheel for PE pipe E2880 110 - 160 5 2,23 1
32078 151 Quick-Acting CSST Cutter E-4546 9.5 - 25.4 1 0,50 6
CSST
* Models for plastic tubing do not include spare cutting wheels

RIDGID Quick-Acting plastic cutter models are equipped to easily convert to cut
copper or other metallic tubing.
1. Remove spare copper cutting wheel from knob.
2. Reverse knob position so that the Cu" notation is visible inside the knob.
3. Screw knob back on to handle.
4. Using the X-CEL Wheel Pin, you can quickly replace the existing plastic cutting wheel with the
copper cutting wheel. Youre now ready to cut copper, aluminum, and brass tubing.
5. When you wish to revert to plastic cutting, follow the same instructions but make sure to reposition
knob so that "PE" and "PVC" notations are visible inside knob.

3.12
 PIPE/TUBE CUTTING & PREPARATION

Tubing Cutter Replacement Wheels

Always use genuine RIDGID Cutter Wheels. These wheels are precision-machined from high-grade steel and are engineered for long life and maximum
cutting accuracy.

32975-32985-97787
32915/32925/32935
Tubing Cutters

96362/ 32950
Catalog No.

40617-32573

66737/33055
66742/33070

59202/39957
(Original Product) 32910
32920
97212
29963
31803
32708

32930
32940
32945
32955

31632
31637
66747
31642
31647
36597
36592
31652
31657
31662
31667
33055
LONG LIFE

154-PE/156-PE
10S/15S/20S

103/104/117

150LS/205S
Model No.

CUTTER

151 CSST

150L/205

122/30S
101/118

151-ML
151-P

152-P

153-P

154-P

156-P
15-SI

WHEELS
35S
65S

30P

151

152

153

154

156

205
10
15

20
30

40
Catalog Std. Blade Application/
Model No.
No. Pack Exp.* Material
66772 E-545 6 6.5 Multilayer
33210 E-702 1 12.5 Heavy Wall PVC, ABS
33165 E-1240 12 4.0
Steel SS
33200 E-1740 6 3.5 Soft Flexible Pipe
PE, PB, PP, Std. &
74720 E-2155 6 7.0 Heavy Wall
PE, PB, PP, Std. &
74730 E-2156 6 10.5
Heavy Wall
PE, PB, PP, Std. &
74735 E-2157 6 12.5
Heavy Wall
33175 E-2191 6 7.5 Steel Tubing
Cutter Wheels

33170 E-2558 6 5.5 Aluminum & Copper

PE, PB, PP, Std. &
83235 E-2880 6 19.0
Heavy Wall
33205 E-2990 6 2.5 Steel, Aluminum & Copper
33185 E-3469 12 3.5 Aluminum & Copper
34695 E-3495 6 7.0 Aluminum
33190 E-4546 6 4.0 Steel SS
33195 E-5272 6 7.0 PVC, ABS, Std. Wall
33180 E-5299 6 10.5 PVC, ABS, Std. Wall
33160 F-158 12 3.5 Aluminum & Copper
88260 E-10279 6 4.5 Thin-Wall PVC
96397 E-1525 6 3.0 Stainless Steel
33551 122SS 1 7.5 Stainless Steel
29973 E-635 1 4.0 Stainless Steel
Denotes Cutter Wheels furnished with original product. Denotes alternate Cutter Wheel. * Blade Exposure = Wall Thickness in mm

3.13
 PIPE/TUBE CUTTING & PREPARATION

Plastic & Multilayer Pipe Cutters

Single Stroke Cutters
For plastic (PVC, CPVC, PP, PEX, PE) and Multilayer tubing.
Spring loaded handles for faster positioning. Single stroke, easy cut.
PC-1250 features a reversible blade providing two times blade life. Is not suitable for cutting
multilayer tubing.
PC-1375 ML: durable aluminium construction for heavy-duty use. Easy attachable ML-adapter for
improved multilayer cutting and instant re-rounding of tubing.

Capacity
Catalog Weight
Model PC-1250 Model No. Description (O.D.) Std. Pack
No.
mm lb. kg
23488 PC-1250 Single Stroke Tubing Cutter 3 - 42 12 0,22 6
26803 PCB-1250 PC-1250 Replacement Blade 18 0,05 1
23493 PC-1375 ML Single Stroke Tubing Cutter* 3 - 35* 34 0,34 6
25588 PCB-1375 PC-1375 Replacement Blade 18 0,05 1
* 3-25 mm when used with ML-adapter

Model PC-1375 ML

When using the PC-1375 ML for cutting multilayer tubing it is recommended to use the included Multilayer adapter for an easier
cut and lesser deformation.

3.14
 PIPE/TUBE CUTTING & PREPARATION

Ratchet Cutters with Ergonomic Grips

Ergonomic grips on bottom handle are spaced at 12" increments to act as a quick pipe measuring
scale.
Model RC-1625 X-CEL quick-change blade.
Burr-less" cutting operation provides a square cut.
Intended materials: Plastic (PVC, CPVC, PP, PEX, PE, Rubber hose) and Multilayer tubing.
1435N and 1442N not suitable for multilayer tubing.

Capacity
Catalog Model Weight
Description (O.D.) Std. Pack
No. No.
mm lb. kg
23498 RC-1625 Ratchet Action Plastic Pipe & Tubing Cutter 3 - 42 1316 0,52 1
27858 RCB-1625 RC-1625 Replacement Blade 18 0,03 1
30088 RC-2375 Ratchet Action Pipe & Tubing Cutter 12 - 63 178 0,90 1
30093 RCB-2375 RC-2375 Replacement Blade 14 0,10 1
26821 1435N Ratchet Cutter 6 - 35 114 0,56 1
68616 1435N-B 1435N Replacement Blade 112 0,04 1
10191 1442N Ratchet Cutter 3 - 42 158 0,74 1
42126 1442N-B 1442N Replacement Blade 18 0,06 1

Model RC-2375

Model 1442N

3.15
 PIPE/TUBE CUTTING & PREPARATION

NEW Plastic Drain Pipe Cutter

The RIDGID P-TEC Cutter is the first cutter of its kind that provides the hassle-free ability to execute
a clean, fast, and straight cut on thin-wall (< 2,5 mm) plastic tube. This versatile cutter can be used on
Polyethylene (PE), Polypropylene (PP), and Thin-Walled PVC tubes of two standard sizes: 32 and 40 mm
OD both sizes with the same tool. Also available is the P-TEC 5000 for cutting 50 mm plastic drain
pipe. The P-TEC Cutter is another addition to the RIDGID Tubing tools family that brings tremendous
value to any trade in which PVC / PP / PE pipe is used and installed.
P-TEC 3240
Unique Features and Benefits
Clean, Automatic Deburring The cut produced by this cutter results in only a fine strand of plastic,
as opposed to the fuzz created around the cut of a hacksaw. No need for a second tool to deburr,
this cutter automatically deburrs in parallel to cutting action.
Automatic Beveling Allows for immediate, easy joining to other sink drain pieces.
Fast Cut On average six rotations to complete one cut, four times faster than a hacksaw.
Straight Cut Easy-view windows ensure a straight cut on the marked pipe every time.
P-TEC 5000
Clean Automatic deburring and beveling.
Fast Cuts in six rotations or less four times faster than a hacksaw.
Straight Easy viewing window ensures a cut on the mark.
Open Bore Design P-TEC 5000 features an open bore design which:
Reduces required hand force for cutting pipe.
Fully eliminates sliding on the pipe.
Makes it possible to cut double-flanged 50 mm plastic drain pipe.
Capacity
Catalog Model Weight
Description (O.D.) Std. Pack
No. No.
mm lb. kg
37463 P-TEC Plastic Drain Pipe Cutter 32 & 40 0.44 0,2 1
3240
40868 P-TEC Plastic Drain Pipe Cutter 50 0.44 0,2 1
5000

CLEAN

FAST

STRAIGHT
Cut with a hacksaw (left)
versus the P-TEC 3240 (right).

3.16
 PIPE/TUBE CUTTING & PREPARATION

Reamers, Deburring Tools

Plastic Construction Inner-Outer Reamer
Handy for quick, clean and easy I.D. reaming and O.D. beveling of 14" (6 mm) to 112" (40 mm) tube.
Plastic construction with long-wearing alloy steel blades.
Gives fast, professional reaming on copper, aluminum, brass and other types of tubing.

Catalog Model Weight Standard

Capacity
No. No. lb. g Pack

34965 127 6 mm to 40 mm 14 113 1

Hardened Steel Construction Inner-Outer Reamer

46 cutting edges on interior cone allow for fast, clean, inner reaming and outer deburring/beveling
223S Inner-Outer Reamer of 12 (12 mm) to 2" (50 mm) copper and stainless steel tubing.
Hardened steel construction.

Catalog Model Weight Standard

Capacity
No. No. Pack
lb. g
29983 223S 6 mm to 36 mm Copper and Stainless Steel Tubing 34 340 1
29993 227S 12 mm to 50 mm Copper and Stainless Steel Tubing 114 560 1

Deburring Tools
Deburring Tool for plastic pipe and tubing.
Made of high-grade steel with specially-designed, long-lasting cutting edges.
Slip-resistant vinyl hand grip.
Ideal for removing outside ridges and inside burrs on plastic pipe and tubing.

Plastic Pipe
Catalog Model Capacity
Description Standard Pack
No. No
mm
35155 72 Deburring Tool 12 - 40 6
64962 73 Deburring Tool 40 - 76 6
64967 74 Deburring Tool 100 6

Combines tube O.D. cleaning and fitting I.D. brush into one hand tool.
Inner-Outer Copper High carbon steel brushes quickly clean " (12 mm) to " (19 mm) nominal tube and fittings in
Cleaning Brush preparation for soldering or brazing.
Durable plastic construction designed for easy brush replacement.

Weight Standard
Catalog No. Model No. Description
oz. g Pack

34142 4100 I-O Copper Cleaning Brush 314 90,7 1

34147 Replacement Brush Set 112 45,3 1

3.17
 PIPE/TUBE CUTTING & PREPARATION

3.18