Scribd
Upload
418 views3 pages

Voyo Mini PC Flash Guide

This document provides instructions for flashing firmware on a Voyo mini pc. It involves using a USB flash drive formatted to NTFS with a "winpe" volume label, copying firmware files to it from a zip file, inserting the flash drive into the Voyo pc along with a display and keyboard, pressing F7 at startup to boot from the flash drive, selecting the flash drive to automatically install the firmware update over 15-20 minutes, and then rebooting the Voyo pc.

Uploaded by

Pahomie Gacic
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
418 views3 pages

Voyo Mini PC Flash Guide

This document provides instructions for flashing firmware on a Voyo mini pc. It involves using a USB flash drive formatted to NTFS with a "winpe" volume label, copying firmware files to it from a zip file, inserting the flash drive into the Voyo pc along with a display and keyboard, pressing F7 at startup to boot from the flash drive, selecting the flash drive to automatically install the firmware update over 15-20 minutes, and then rebooting the Voyo pc.

Uploaded by

Pahomie Gacic
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 3

Voyo mini pc firmware flash guide

1. Firstly, you need a USB flash drive, of which storage should be no less than
8GB. Format it on computer, file systemNTFS, volume labelwinpe

2. Extract the contents of the zip file on your computer, then copy it to the U
disk, there are 45 files(include folders)
3. Connect VOYO mini PC to a display device and power supply, insert the U
disk and connect keyboard into the two USB interfaces at the back of VOYO
mini pc. Power on, press F7 till the display screen shows the interface as
below
4. Using& to choose your U disk, press Enter, the system will
automatically install, this procedure may need 15-20 minutes, when the
screen show the information as below, input exit, press Enter, it will
auto reboot.

5. After reboot, youll see the interface as below, select OK, it will restart.

You might also like