Scribd
Upload
177 views5 pages

Capacitive Transducers

Capacitive transducers can measure various physical quantities by detecting changes in capacitance. Capacitance is determined by the area and separation of parallel conducting plates as well as the dielectric material between them. Different transducer configurations exploit changes in these parameters caused by measurands like displacement, pressure, or humidity. Examples shown include a pressure transducer made of fused quartz with a circular diaphragm and electrodes, and a micromachined silicon accelerometer with multiple differential capacitors using a movable central plate between fixed outer plates.

Uploaded by

Khairunnisa Abu Khair
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
177 views5 pages

Capacitive Transducers

Capacitive transducers can measure various physical quantities by detecting changes in capacitance. Capacitance is determined by the area and separation of parallel conducting plates as well as the dielectric material between them. Different transducer configurations exploit changes in these parameters caused by measurands like displacement, pressure, or humidity. Examples shown include a pressure transducer made of fused quartz with a circular diaphragm and electrodes, and a micromachined silicon accelerometer with multiple differential capacitors using a movable central plate between fixed outer plates.

Uploaded by

Khairunnisa Abu Khair
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

CAPACITIVE TRANSDUCERS

The change in capacitance in response to a measurand has many applications in

physical transducers. Displacements, velocity, acceleration, force, pressure,

vacuum, flow, fluid level, audio sound field, and relative humidity can be

measured using capacitive transducers.

The capacitance between parallel conducting plates with a dielectric material

between them is given by

Equation indicates that the capacitance varies linearly with the area A and the

dielectric constant of the material, but it varies inversely with the separation

between plates. Any changes in the above-mentioned parameters caused by a

measurand, and taken one at a time, provide practical transduction mechanisms.


Fig 5.2 Capacitive Displacement transducers.

Figure 5.2 shows some of the configurations where the changes in Cs are used to

measure physical measurands. The first two lend themselves to the measurement of

displacement, force, flow, vacuum, and pressure, and the third configuration could

be used to measure the changes in the dielectric constant brought about by the

absorption of moisture13 or a chemical reaction with the dielectric material.

Fig 5.3.Capacitive pressure Transducer

Figure 5.3 shows the diametrical cross section of a pressure transducer constructed

totally from fused quartz, which has a very small temperature coefficient of
expansion. The transducer consists of a circular diaphragm rigidly clamped by

brazing it to a fused quartz body. A very shallow cavity has been sputter etched in

the body to provide the separation Zo between the capacitor plates. This cavity is

vented to the atmosphere by a small hole in the body of the structure, allowing the

transducer to measure Gage pressure.

The diaphragm has an annular electrode of metalized chrome and gold on the

inside face, and a common electrode is deposited on the bottom of the etched

cavity. The capacitance of this transducer as a function of the applied pressure is

given by
The units of b1 and b2 are meters. Using the Eq. the capacitance of a circular

electrode transducer in the center of the diaphragm can be obtained by setting b1

equal to 0 and b2 equal to the desired radius. This construction is currently used in

an invasive blood pressure transducer shown in Fig. 5.4.

Fig 5.4. Blood Pressure Transducer

It has a circular sensing electrode in the center of the diaphragm, an annular

reference electrode very close to the clamped edge of the diaphragm, and a full

electrode at the bottom of the etched cavity. The reference capacitor changes very

little with pressure.

A monolithic capacitor-type accelerometer made from silicon by microma-chining

results in a rugged transducer with excellent thermal and elastic stability.

Techniques is shown in Fig. 5.5a.


It is made up of several differential capacitors, and each capacitor section consists

of two fixed outer plates and a center plate that is movable.

Fig. 5.5b shows the deflected position of the center plate when the transducer

experiences acceleration. The deflection, and consequently the capacitance change,

is proportional to the acceleration.

In many applications, capacitive transducers are connected in an ac bridge circuit

to obtain an electrical output proportional to the measurand. In others it can be

made a part of an LC oscillator, where the oscillator frequency is proportional to

the magnitude of the measurand. When differential sensing is used, the sensitivity

can be doubled and the temperature sensitivity reduced.

Fig 5.5.Capacitive Micro Machined Accelerometer

Source: http://mediatoget.blogspot.in/2012/05/capacitive-transducers.html

You might also like