Scribd
Upload
2K views1 page

Diesel Euro 2M - Specification

This document provides specifications for Euro 2M diesel fuel, including: - Minimum and maximum levels for various fuel properties like color, ash content, viscosity, sulfur content, etc. tested using standard methods like ASTM. - Applications for self-ignition diesel engines in vehicles and industrial equipment. - Precautions for safe handling as the fuel may release toxic hydrogen sulfide gas and is combustible. - The fuel meets the SIRIM MS 123:2005 specification for diesel in Malaysia and may contain up to 5% palm methyl ester biodiesel.

Uploaded by

Mohd Fouzi Abdullah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
2K views1 page

Diesel Euro 2M - Specification

This document provides specifications for Euro 2M diesel fuel, including: - Minimum and maximum levels for various fuel properties like color, ash content, viscosity, sulfur content, etc. tested using standard methods like ASTM. - Applications for self-ignition diesel engines in vehicles and industrial equipment. - Precautions for safe handling as the fuel may release toxic hydrogen sulfide gas and is combustible. - The fuel meets the SIRIM MS 123:2005 specification for diesel in Malaysia and may contain up to 5% palm methyl ester biodiesel.

Uploaded by

Mohd Fouzi Abdullah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

DIESEL (Euro 2M)

GUARANTEED LEVEL
PROPERTIES TEST METHOD
MINIMUM MAXIMUM
Colour (ASTM) - 2.5 MS 2010 / ASTM D1500 / D6045
Ash, mass % - 0.01 MS 2013 / ASTM D482
Cloud point, C - 19.0 ASTM D2500 / D5772
Flash point, C 60 - MS 686 / ASTM D93
Kinematic viscosity at 40C, mm / s 1.5 5.8 MS 1831 / ASTM D445
Copper corrosion ( 3 h at 100C ) - 1 MS 787 / ASTM D130
Water by distillation, vol % - 0.05 MS 1800 / ASTM D6304 / D95
Sediment by extraction, wt% - 0.01 MS 790 / ASTM D473
Carbon residue on 10% bottoms, wt% - 0.20 MS 962 / ASTM D189 / D4530
Density at 15C, kg/L 0.810 0.870 MS 1893 / ASTM D1298 / D4052
MS 2011 /ASTM D664 / D974 /
Acid number, mgKOH/g - 0.25
D2624
Electrical conductivity, pS/m 50 - MS 1889 / ASTM D2624
Cetane index 49 - MS 1890 / ASTM D976 / D4737
or
Cetane number 49 - MS 1895 / D613 / D6890 / IP498
Physical distillation at 95% recovered volume, C - 370 MS 563
or
Simulated distillation at 95% recovered mass, C - 399 ASTM D2887 / D86
MS 1891 / ASTM D4294 / D2622 /
Total sulphur, mg/kg - 500
D5453 / D7039 / D5950
Lubricity, m - 460 MS 1892 / ASTM D6079

APPLICATION PRECAUTION SPECIFICATION

Ignition compression diesel engine. May release Hydrogen


For Self-Ignition This diesel meets the following
PETRONAS Diesel is a high cetane index fuel Sulfide (H2S) gas which specification:
specification
designed for use in low and high speed self- self may be fatal if SIRIM MS 123:2005 (AMD. 1)
rd
ignition compression engines to provide efficient, Combustible Hydrogen 3 Revision
dependable and smooth operation. It has the Sulfide (H2S) gas may
proper viscosity suitable for critical
itical fuel injection cause irritation Diesel fuel may contain up to 5%
systems to provide maximum protection against Prolonged or repeated (v/v) of Palm Methyl Ester (PME)
wear and leakage. Also suitable for industrial skin complying with SIRIM MS 2008
purpose especially for direct burning ie. boiler, If swallowed, DO NOT and EN 14214
furnace, dryer, etc. induces vomiting. May
cause chemical
pneumonitis.

Revision: March 2011

You might also like