Vision Sensors For Recognition and Assessment of Objects and Scenes
Vision Sensors For Recognition and Assessment of Objects and Scenes
recognition and
assessment of
objects and scenes.
Industrial imaging
www.ifm.com/gb/vision-sensors
Gesamtkatalog EN 2015_Stilvorlage LK FrutigerOT_2010 DE_GB.qxd 17.11.14 12:50 Seite 3
Powerful like a
camera system,
simple like a sensor
Vision sensors
A few years ago high-price camera sys- Easy parameter setting instead of com- components such as illumination, optics,
tems were needed. Due to technical plex programming is the motto. Ready- evaluation and output logic are integrat-
developments and continuously falling to-use function blocks support the ed into the industrially compatible
prices for components ever more intelli- integration into the PLC. An Ethernet housing. Tasks such as quality control,
gent functions could be implemented process interface is used for data transmis- monitoring completeness or reading 1D
at low cost in an ever smaller space. sion, parameter setting and remote main- and 2D codes can easily be performed at
Compact vision sensors not only replace tenance. Also, all units have switching low cost using ifm vision sensors.
camera systems but also offer additional outputs to signal successful testing.
application options. For the variable So vision sensors offer the same ease of
position detection of objects or scenes use as binary sensors.
they replace, for example, complex prox-
imity sensors or multiple sensor solutions
such as sensor bridges, when pallets or
crates are monitored for completeness.
2
For industrial
applications
3
Competence in application-
specific solutions
The right choice is decisive
Vision sensors
Object recognition
type O2D
Compare
contours
Object inspection
type O2V
Count pixels
Identification
type O2I
Read codes
3D object recognition
type O3D
Detect
dimensions
Type overview
operating distance /
field of view size
4
For industrial
applications
tio s,
tio s,
2
nd e
si c t
si de
ou th
ap
cm
n
po je
po co
sh
gr o
d ob
1
ck t t
d D
le
n
ba ras
an g
an 2
a
n vin
th
n d
ria
t
io an
on
tio o
va
le
ta m
rc
at D
al
nt 1
u
sm
ie ng
lo
co
ts
or vi
n
c
e o
ie
no
je
bl m
or
ob
le
b
ria
ria
va
va
For objects with defined geometry.
For assessment of presence and
completeness, for position detection and
for sorting tasks. 6- 7
Use for quality assurance in assembly
automation and on machine tools.
14 - 15
5
Object recognition type O2D
All geometries in focus
Flexible:
Orientation-independent contour
verification. 32 scenes with up to
24 different objects can be saved
in the unit.
Reliable:
The sensor reliably detects the
defined geometries at close and
long range even with changing
lighting conditions or back-
grounds.
Safe:
Password protection against
unauthorised access.
Everything at a glance:
Variants with different viewing
angles for different field of view
sizes in direct illumination or
backlighting method.
Light:
Integrated and / or external
illumination.
Everything documented:
Extensive service options with
statistics file and image tank.
6
Object recognition
for assembly, production
and quality control
Position Horizontal and
With an intuitive regardless of In the photo on vertical coordi-
step-by-step inter- orientation, and the left the nates of the
face and good / transmits the contour sensor freely selectable
bad parts the user results (good or checks the correct reference point
can simply create bad, position, diameter of the
Orientation
a model of the orientation) to the wheel nut drills on
in degrees
object to be recog- higher-level PLC. a brake disk.
nised. The recog- The sensor can
nition software manage up to
compares the 32 separate tasks
object with the with a maximum
saved ideal, of 24 models each. Number Objects
Further information at
www.ifm.com/gb/object-recognition
7
Object inspection O2V
Checking variable
features of
objects and scenes
Whereas common
vision sensors
check parts on the
basis of defined
contours (like the
contour sensor
O2D) the new
O2V pixel counter
compares on the
basis of variable
features.
Flexible:
Extensive assessment parameters
for a reliable object inspection
by means of variable features.
32 scenes with up to 24 different
objects can be saved in the unit.
Everything at a glance:
Variants with different viewing
angles for different field of view
sizes.
Safe:
Password protection against
unauthorised access.
Everything documented:
Data logger with fault memory.
8
Size Outer and inner
width and height
Number Objects
Further information at
www.ifm.com/gb/object-inspection
9
Identification type O2I
Reliable identification of 1D
and 2D codes as well as text
Powerful
identification
Independent of
orientation and
number of codes
the multicode
reader automati-
cally decodes
1D and 2D codes.
The new version
also solves OCR
tasks, e.g. for pro-
duct identification
by type designa-
tions or serial
High reading reliability: numbers.
Automatic setting of the All information
such as expiry
exposure time, adaptation by
segmented lighting for critical
surfaces.
Flexible connection:
RS-232, Ethernet TCP/IP and
Ethetnet/IP interface.
Compact integration:
Illumination, optics, evaluation The compact unit is installed using the
suitable mounting set and connected
and interfaces in an industrially to the controller (PLC) via the process
compatible housing. interface.
Parameter setting is done via an
Ethernet cable using a common PC.
Easy handling:
The system is configured and
ready for use within a few
minutes with PC software or
directly on the sensor.
10
Identification for
industrial automation
QR code
date or production The professional Optimum
date can now be software of the illumination
read directly. multicode reader In addition to an
Further functions takes the high automatic expo-
include the output reading reliability sure setting,
of the code of the Data Matrix manual adjustment PDF code
position via the code to a new is also possible.
process interface, dimension. Four lighting
adjustable total Top choice for segments can be
quality parame- price/performance: deactivated and
ters, individual the multicode activated manu-
illumination set- reader provides ally. So optimum DMC code
tings for each high functionality results are achiev-
configuration in a and performance ed even with
group, integrated at the price of a highly reflective
fault memory and sensor. metal surfaces.
access protection
with password. Bar code
OCR
710377582942
Further information at
www.ifm.com/gb/multicodereader
11
3D object recognition type O3D
The third dimension
at a glance
Level
measurement:
The sensor is suit-
able for contin-
uous level measu-
rements of non-
transparent solids
and bulk materials
in tanks, silos,
hoppers or in
heaps. Monitoring
conveyors for level
or belt usage is
also possible. In
the measuring
Award winning: range the sensor
determines the
The first industrial 3D sensor that level via the de-
detects objects in three dimen- fined background
sions at a glance. The sensor and transmits the
analogue level
operates on the principle of time
value or has the
of flight measurement based on function of a point
PMD technology. level switch.
Precise:
The resolution of 176 x 132 pixels
results in 23,232 distance values
per measurement for the detailed
assessment of the application.
User-friendly
Continuous
Independent: exchange with
Illumination, time of flight users and exten-
measurement and evaluation are sive handling tests
have led to an
integrated into an industrially
compatible housing.
Easy:
Switching outputs and analogue
outputs for the simple integration
into the control environment.
Far sight:
Range up to 5 m irrespective of
the object colour, robust against
extraneous light.
12
3D object recognition for conveying
and packaging technologies
Level
Monitoring This causes a lot of Object The sensor has the
completeness: additional cost, in dimensioning: function of a sim-
Consumer goods particular in case Size determination ple threshold
and industrial of perishable for volume calcu- switch or transmits
products are often goods. On the lations or sorting object size, orien-
delivered in basis of colour the applications. tation and position
sensor checks the to the warehouse Complete-
homogeneous Warehouse, post
handling units for management or ness
packaging. room, logistics dis-
If a pallet with underfill and over- tribution centre or ERP system.
only one incom- fill. As opposed to transport system: In addition, quality
plete handling conventional solu- optimisation of parameters help
unit reaches the tions, there is the storage area is detect damaged or
customer, they flexibility in needed every- deformed object. Object
often return the changing the type where. dimen-
whole pallet. or size of the sioning
handling unit.
Package dimensioning
Today countless courier services charge
not only according to the actual
extremely simple
weight of an object to be sent but also
usability and ease according to the object's bulkiness, i.e.
of integration of according to strap length or dimension-
the sensor al weight. If the dimensional weight or
from ordering to the strap length exceeds the actual
replacement. weight, the shipping or freight costs
are calculated on this basis.
A wiring wizard
helps with the first
set-up.
Further information at
www.ifm.com/gb/o3d
13
Type overview
operating distance /
field of view size
A wide-angle lens
B standard lens
C telephoto lens
14
B 5650 x 4000
C 3650 x 2670
B 4520 x 3200
C 2920 x 2130
B 3390 x 2400 B
Field of view size [mm] C 2190 x 1600
B 2260 x 1600
C 1460 x 1070
B 560 x 400
C 360 x 270 C
B 1130 x 800 C
C 730 x 530
B standard lens
C telephoto lens
B
15
Visit our website:
www.ifm.com
ifm article no. 78002156 We reserve the right to make technical alterations without prior notice. Printed in Germany on non-chlorine bleached paper. 10/16
Industrial imaging Systems for
mobile machines
IO-Link Accessories
RANTY
AR
W
45128 Essen
ct