Scribd
Upload
53 views

7 Channel Line Sensor

The document describes a 7 channel line sensor that can be used to follow lines. It contains 7 individual line sensors spaced 18mm apart that output analog voltages between 0.18V and 2.2V depending on whether they detect a light or dark surface. The sensor uses red LEDs for illumination and has a narrow 5 degree field of view. It is powered by 5V and can be used to navigate mazes or follow curved paths due to its multiple sensing points.

Uploaded by

DhavanLal
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
53 views

7 Channel Line Sensor

The document describes a 7 channel line sensor that can be used to follow lines. It contains 7 individual line sensors spaced 18mm apart that output analog voltages between 0.18V and 2.2V depending on whether they detect a light or dark surface. The sensor uses red LEDs for illumination and has a narrow 5 degree field of view. It is powered by 5V and can be used to navigate mazes or follow curved paths due to its multiple sensing points.

Uploaded by

DhavanLal
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

7 Channel Line Sensor

7 Channel Line Sensor


August 2007

Package contains:
7 Channel Line Sensor
FRC Cable with Box connector

www.nex-robotics.com
7 Channel Line Sensor

7 Channel Line Sensor

Introduction:

Line sensors are used for sensing white line on dark surface or black line on light
surface. These line sensor boards have One, Three, Five or Seven line sensors
connected together. These sensors working together can follow any curved or zig-
zag path. Because of multiple sensors it can even detect nodes and move on the
maze of white or black lines. Line sensor consists of high intensity red LED for
illumination and directional photo transistor for line sensing. Phototransistor
consists of a photo transistor and convex lense.

Because of precise alignment between lense and photo transistor it has


very narrow viewing angle of 5 degrees. This makes this line sensor highly
immune to ambient light. This sensor gives 0.18 volts on bright surface and gives
2.2V or more on the dark surface. Its output is analog in nature. Because of analog
output one can write complex algorithm to follow white line using
microcontroller. This sensor has very proven track record in various robotics
competitions. This sensor first designed by Sachitanand during Robocon 2004.
Team V.E.S.I.T. won competition that year.

www.nex-robotics.com
7 Channel Line Sensor

Specifications:

Supply: 5V, 120mA maximum


Sensor output: Analog out, 0.18V to 2.2V
Illumination: Red ultra bright LEDs
Sensing element: Directional photo transistor with 5 degree viewing angle
Sensing distance: 9mm to 20mm from the lens assembly of the sensor
Optimal sensing distance: 10mm from the lens assembly of the sensor
Number of sensors: 7
Distance between adjacent sensors: 18mm
Connector: 20 Pin FRC male connector
Mounting: Four 3mm mounting holes
FRC cable included for 7 channel line sensors

Pin Connections:

www.nex-robotics.com
7 Channel Line Sensor

Working of White line sensors:

White line sensors are used for detecting white line on the ground surface.
White lines are used to give robot sense of localization. White line sensor consists
of a highly directional phototransistor for line sensing and ultra bright red LED for
illumination. Because of directional nature of the phototransistor it does not get
affected with ambient light unless it is very bright.

Circuit diagram of the white line sensor

When the robot is not on a white line, amount of light reflected is less, so
the photo transistor remains in active region. In this case, the line sensor gives an
output in the range of 1 volt to 5 volt. When the sensor is on a white line, reflected
light drives the photo transistor into saturation. In this case, the sensor gives an
output in the range of 0.15 to 0.8 volts. Power to the red LEDs can also be turned
OFF to extend robots battery life.

Perfect white line sensor alignment White line sensors these sensors were used in
following robots:

www.nex-robotics.com
7 Channel Line Sensor

1. Robocon 2004 India winning team

26 channel white line sensor used in Robocon 2004

2. Fire Bird and Dexter series of robots

Fire Bird 1 robots doing adaptive cruise control 3. Fire Bird III robots
www.nex-robotics.com
7 Channel Line Sensor

3. Fire Bird IV Robot

Fire Bird IV robot

Insert FRC cable in proper direction. If you insert cable in opposite


direction sensor will get damage.
Do not exceed your supply more than 5V it will immediately damage your
sensor.
Beware of static electricity. It can damage your sensors. Touch ground
(may be back side of your PC) before touching the sensor.

www.nex-robotics.com

You might also like