Scribd
Upload
404 views2 pages

Inspection & Testing Requirements Scope:: Test and Inspection Per

This document outlines inspection and testing requirements for alloy and stainless steel fasteners like bolts and nuts. It specifies that materials must be tested and inspected according to various ASTM standards for properties like mechanical strength, hardness, heat treatment, and dimensions. Visual inspection is required, and certificates documenting test results and material properties must be provided to the inspector. Additional tests may be specified in the purchase order, like high temperature or stress relaxation tests.

Uploaded by

Selvakpm06
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
404 views2 pages

Inspection & Testing Requirements Scope:: Test and Inspection Per

This document outlines inspection and testing requirements for alloy and stainless steel fasteners like bolts and nuts. It specifies that materials must be tested and inspected according to various ASTM standards for properties like mechanical strength, hardness, heat treatment, and dimensions. Visual inspection is required, and certificates documenting test results and material properties must be provided to the inspector. Additional tests may be specified in the purchase order, like high temperature or stress relaxation tests.

Uploaded by

Selvakpm06
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

INSPECTION & TESTING REQUIREMENTS REVISION: 08/06/2006 CODE NUMBER: PAGE:

SAUDI ARAMCO FORM-175 REPLACES: 02/01/1999 IR100100 1 of 2


SCOPE: FASTENERS, Alloy and Stainless Steel Nuts & Bolting Materials: Bars,Bolts, Screws, Studs, Stud Bolts, & Wire; For Use in High or
LowTemperature Services.

TEST AND INSPECTION PER: ASTM A-193 & ASTM A-194 & ASTM A-320 & ASTM A-325, and Specifications As Noted Below.

(1) VISUAL INSPECTION WITNESSING BY INSPECTOR (Note 1)


(2) CERTIFICATES / RECORDS TO BE CHECKED BY INSPECTOR
(3) CERTIFICATES / DATA TO BE PROVIDED BY VENDOR / SUPPLIER / MANUFACTURER
0010
0010
*** X
Pre-Fabrication/Production Requirements
Material Test Reports
Specification Details / Notes:
Per applicable ASTM.

0020
0010
*** X
In process inspection & test requirement
Heat Treatment
Specification Details / Notes:
Relevant ASTM; Note material grades that shall be carbide
solution treated.

0020 X Mechanical Testing: a) Tension Test Per ASTM A-370 or F-606. Only for ASTM A-193 & 320 Bolting
Materials.

0030 X Mechanical Testing: b) Impact Test Per ASTM A-370 or F-606. Only for ASTM A-320 Bolting
Materials. Note exceptions to this test. For ASTM A-194 see
(Note 3). For ASTM A-193 Bolting Materials, only if specified in

0040 X X Mechanical Testing: c) Hardness Tests Per ASTM A-370 or F-606. When required by relevant ASTM.
For ASTM A-193 Grades B7M & B16, only if specified in PO.

0050 X X Mechanical Testing: d) Proof Load Test Only for ASTM A-194 Nuts, except those not covered by ANSI
B1.1 & 18.2.2.

0060 X X Mechanical Testing: e) Rotational Capacity Test Per ASTM A-370 or F-606. Only for ASTM A-325 zinc-coated
bolts.

0030
0010
***
X
Final inspection & test requirements
Workmanship, Finish, and Appearance
Specification Details / Notes:
Note: for ASTM A-325 bolts, surface discontinuity limits shall be
per ASTM F- 788.

0020 X Dimensions ASME B 18.2.1 or 18.2.2. ASME B 18.2.3.7 only for A325.

0030 X Threads ASME B 1.1 Class 2A fit.

0040 X Markings Per applicable ASTM.

0040
0010
*** X
Additional/Supplemental Requirements
Only if Specified in Purchase Order: a) High Temperature Test
Specification Details / Notes:
Only for ASTM A-193 Bolting Materials.

0020 X Only if Specified in Purchase Order: b) Stress Relieving Only for ASTM A-193 Bolting Materials.

IR100100 Continued...
INSPECTION & TESTING REQUIREMENTS REVISION: 08/06/2006 CODE NUMBER: PAGE:
SAUDI ARAMCO FORM-175 REPLACES: 02/01/1999 IR100100 2 of 2
(1) VISUAL INSPECTION WITNESSING BY INSPECTOR (Note 1)
(2) CERTIFICATES / RECORDS TO BE CHECKED BY INSPECTOR
(3) CERTIFICATES / DATA TO BE PROVIDED BY VENDOR / SUPPLIER / MANUFACTURER
0030 X X Only if Specified in Purchase Order: c) MPI Only for ASTM A-193 Bolting Materials.

0040 X Only if Specified in Purchase Order: d) Stress Relaxation Test Only for ASTM A-193 Bolting Materials.

0050 X Only if Specified in Purchase Order: e) Lateral Expansion Only for ASTM A-320 Bolting Materials.

Notes:
(1) May only be waived by the responsible Saudi Aramco, ASC, AOC
Inspection Offices.
(2) See form SA175 000003 for instructions on using this form.
(3) Testing required for ASTM A-194 nuts ordered in conjunction with
ASTM A-320 bolting material or, if ordered separately, when low
temperature service is specified.

End of IR100100

You might also like