Scribd
Upload
199 views2 pages

C2118pe Ultrasensor 2

The UltraSensor 2 is an ultra small, ultra fast, and ultra reliable sensor for monitoring spool movement in machinery. It is the smallest sensor on the market and has no moving parts, allowing it to read cycles at any practical speed. Being completely solid state, it provides high reliability and durability. New improvements include a power-on diagnostic LED, metallic connector, short-circuit protection, and advanced sensing algorithm. It is available in NPN and PNP signal versions and is IP67 rated for harsh environments.

Uploaded by

api-295828551
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
199 views2 pages

C2118pe Ultrasensor 2

The UltraSensor 2 is an ultra small, ultra fast, and ultra reliable sensor for monitoring spool movement in machinery. It is the smallest sensor on the market and has no moving parts, allowing it to read cycles at any practical speed. Being completely solid state, it provides high reliability and durability. New improvements include a power-on diagnostic LED, metallic connector, short-circuit protection, and advanced sensing algorithm. It is available in NPN and PNP signal versions and is IP67 rated for harsh environments.

Uploaded by

api-295828551
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

ULTRASENSOR 2

CHARACTERISTICS ULTRASENSOR 2
ULTRA SMALL, ULTRA FAST, ULTRA RELIABLE
ULTRA SMALL:
SMALLEST SENSOR ON THE The UltraSensor 2 has been designed as a next generation
MARKET TODAY. replacement of Proximity and micro switch systems for
SMALL SIZE MEANS EASIER monitoring spool movement in progressive divider
INSTALLATION ON TRICKY elements. A single model will work with all standard SMX,
MACHINERY. SMP, SMO, nP and nPR+ divider blocks as a screw-on
accessory without requiring special arrangement or
ULTRA FAST: modification to the spool.
NO MECHANICAL MOVING The patented concept works by monitoring magnetic flux variations through a Hall-effect sensor
PARTS MEANS THE SENSOR as the spool enters the sensing range. There are no moving parts which means the solid state
CAN READ ANY PRACTICAL device is completely wear free.
CYCLE SPEED.
The device is equipped with 2 LED:
ULTRA RELIABLE: 1. MONITORING LED (ORANGE): allows you to see the output signal. LED signal indicate a good
COMPLETELY SOLID STATE function of the spool.
OPERATION FOR HIGH 2. DIAGNOSTIC LED (GREEN): At power-on the number of pulses indicates the magnetic flux level.
RELIABILITY AND DURABILITY. Pulses number is from 0 to 10. 5 blinking are standard pulses which shown a good function of
device.
IP 67 PROTECTION. Thanks to this diagnostic system you can verify the correct reading of magnetic field.
FULLY POTTED SOLID STATE NPN and PNP connection options are standard within the same sensor.
DEVICE:
MEANS CIRCUIT IS ISOLATED
NEW IMPROVEMENTS
FROM THE ENVIRONMENT. NEW Power-on diagnostic LED
Version 2
2 LED: NEW Metallic connector
- GREEN DIAGNOSTIC LED NEW Short-circuit protection
- ORANGE MONITORING LED NEW Advanced sensing algorithm
DIAGNOSTIC
NEW Interference resistant circuitry more robust than a normal prox. switch!
NEW Protection against reverse polarity.
NPN AND PNP SIGNAL:
BOTH INCLUDED AS
STANDARD.
SENSOR FOR SMX - 1655305 - 1655340 (SS 316)
M12 HEAVY DUTY METAL
CONNECTOR:
PROVIDES ROBUST WIRING
SOLUTIONS.

SENSOR FOR SMP - 1655306 - 1655348 (SS 316)

AP PLICATIONS
SMX, SMP, SMO, NP AND
NPR+ PROGRESSIVE SYSTEMS

SENSOR FOR SMO, NP AND NPR+ - 1655308 - 1655342 (SS 316)

Patented:
Ultrasensor technology is
protected by international
patents.

Patented:
US 20080284415 A1
ULTRASENSOR 2
TECHNICAL INFORMATION
TECHNICAL CHARACTERISTICS
Material Stainless steel AISI 316 - Nickel-plated brass
Max. cycle per minute 1000
Voltage 8 28 V DC
Short circuit protection yes
Protection degree IP 67
Operating temperature -13 +158 F (-25C +60 C)
Connector M12x1
Output signals NPN 2A - PNP 0,7A
Max allowable pressure on the front sensor surface 5800 psi (400 bar)
MOUNTING INFORMATION
CLAMPING TORQUE
SMX - nP - nPr+ 14 Nm +-5%
SMO 10 Nm

OPERATING PRINCIPLE
CONNECTION
Magnet Normally, the magnetic field is balanced
M12 connection top view Sensing range around the hall sensor.

With the spool in the sensing range, the


flux density is modified allowing the Hall
Hall Effect Sensor Effect sensor to detect the presence of the
spool.
Sensing range Magnet The use of a magnetic flex variation allows an
extended sensing zone which avoids
problems on systems with low flow rates and
PIN FUNCTION backpressure where the spool can often stop
1 Vdc in 828V or bounce on the sensing surface.
2 NPN out
3 GND Hall Effect Sensor
4 PNP out

ORDERING INFORMATION

Material Part. No.


Nickel-plated brass 1655306
Sensor for SMP
Stainless steel AISI 316 1655348
Nickel-plated brass 1655305
Sensor for SMX
Stainless steel AISI 316 1655340
Nickel-plated brass 1655308
Sensor for SMO - nP - nPR+
Stainless steel AISI 316 1655342

ACCESSORIES M12 female connector 0039999


5 m cable , M12 female connector 0039815
2 m cable, M12 female connector 0039168
2 m cable, 90- M12 female connector 0039830

Info distributor:

C2118PE WK 38/16 Dropsa products can be purchased from Dropsa subsidiary and Dropsa sales
representatives, visit www.dropsa.com/contact or contact us [email protected]

You might also like