Scribd
Upload
142 views

Quick Start Guide - Standalone: I. Start Neat Image

This quick start guide summarizes the basic steps for using Neat Image standalone to reduce noise in an image: 1) Open Neat Image and load an input image 2) Build a noise profile by selecting a flat featureless area for analysis 3) Adjust the noise filter settings like noise reduction amounts and sharpening in the preview 4) Process the full input image with the selected settings and save the output image.

Uploaded by

stopless_dalian685
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
142 views

Quick Start Guide - Standalone: I. Start Neat Image

This quick start guide summarizes the basic steps for using Neat Image standalone to reduce noise in an image: 1) Open Neat Image and load an input image 2) Build a noise profile by selecting a flat featureless area for analysis 3) Adjust the noise filter settings like noise reduction amounts and sharpening in the preview 4) Process the full input image with the selected settings and save the output image.

Uploaded by

stopless_dalian685
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Quick Start Guide Standalone

This guide is for Neat Image v8 standalone. If you use another version of Neat Image, please check its
documentation.

I. Start Neat Image


The main window of Neat Image will open up:

II. Open an input image in Neat Image


Use the Open input image button:

III. Switch to Device Noise Profile


Click the Device Noise Profile tab:
IV. Build a noise profile using Auto Profile
1. Click the Auto Profile button to build a new noise profile for the input image:

Auto Profile will try to automatically find and analyze a flat featureless image area that contains only noise
and no important details:

2. Visually inspect the selected image area it should contain no visible details, only noise; otherwise the
noise profile and subsequent noise reduction may be inaccurate.

If the selected area does contain any details, move the selection to a featureless area or simply draw a new selection in
such an area (the selection must be at least 32x32 pixels large). Then click the Auto Profile button again.

3. After that, a new noise profile is ready and the input image can be processed.

V. Switch to Noise Filter Settings


Click the Noise Filter Settings tab:

VI. Check Preview


Neat Image will automatically select an area or the whole visible part of the image and prepare a preview:
Hint: click in the preview area in Neat Image to compare before and after versions.

VII. Adjust Filter Settings to tune noise reduction and sharpening


1. The default filter settings should produce good results,
yet it may be useful to change some settings and check
the preview:

a. Try to vary Noise Reduction Amounts:


Luminance.
This controls how much of the detected noise is removed in
the luminance component of the image. Too high values can
lead to unnatural (oversmooth, plastic-like) results. Too low
values may be not enough to sufficiently reduce objectionable
noise. You can balance the noise reduction amount to get the
result that looks best to your eyes.

b. Try to change other parameters as well.


c. You can find more details about noise filter settings in the Filtration process details section of the User
Guide.

2. When you are happy with the preview results proceed to the next step below.

VIII. Switch to Output Image tab to process the whole image


Click the Output Image tab:
This will automatically process the whole input image.

IX. Save output image


After the processing is completed, save the output image:

The above steps explain the basic Neat Image workflow. There is a lot more information about building noise
profiles, adjusting filter settings, using the calibration target, etc.

Please use the following materials to learn more about using Neat Image:

More information on device noise profiling with examples of good and bad areas for noise profiling
Recommended: the Filtration process details section of the User Guide
Questions and Answers
Tips and Tricks
Neat Image community forum a lot of useful information and practical experince of Neat Image user
can be found there
Technical support by e-mail

You might also like