Scribd
Upload
626 views2 pages

Service Bulletin for C Series SSL Parts

This service bulletin from Volvo outlines the special parts required to use the Service Master service tool on their new "C" series skid steer loaders and compact track loaders. It provides the part numbers for either the old interface or the new interface that is needed to connect the service tool to the ECU on these models. Access to software downloads and training is also required for service personnel to support the new "C" series equipment.

Uploaded by

Anthony Pozo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
626 views2 pages

Service Bulletin for C Series SSL Parts

This service bulletin from Volvo outlines the special parts required to use the Service Master service tool on their new "C" series skid steer loaders and compact track loaders. It provides the part numbers for either the old interface or the new interface that is needed to connect the service tool to the ECU on these models. Access to software downloads and training is also required for service personnel to support the new "C" series equipment.

Uploaded by

Anthony Pozo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
  • Service Bulletin Overview
  • Part Requirements and Specifications

VOLVO CONSTRUCTION EQUIPMENT

SERVICE BULLETIN
Language Code Group Product No. Version Date Page
GB 372 SSL 20 3 2013-05-24 1/2
Applies to models
MC105C, MC110C, MC115C, MC125C, MC135C, MC155C, MC60C, MC70C, MC85C, MC95C, MCT110C,
MCT125C, MCT135C, MCT145C, MCT70C, MCT85C, MCT95C
Supersedes SB 372 SSL 20 Version 2 dated 2012-11-06. Changes are marked with lines in the margin.

Required parts for C Series SSL service tool


NOTE!
Please pay attention to the safety instructions in the Operator's
and Service Manuals concerned.
This Service Bulletin is to be considered as technical information
only and is not subject to any reimbursement programs outside
normal warranty.

Cause
The following special parts are required to use the Service Master
service tool with the new C series SSLs.

Action
In order to be able to connect the service tool to a C series skid
steer loader or compact track loader ECU, the following parts are
required: see table below
Software availability is contingent upon dealer service personnel
successfully completing "C" Series SSL training course. Access
to a TeamPlace site and machine software files will then be
accessible for download.

Affected machines

Models Emission stage Ser. No.


MC110C, MC115C, MC125C, Tier 3 / Stage IIIA 1640000
MC135C, MC155C, MCT110C, Tier 4 / Stage IIIB 2206003
MCT125C, MCT135C, MCT145C
MC60C, MC70C, MC85C, MC95C, Tier 3 / Stage IIIA 1644000
MC105C, MCT70C, MCT85C, Tier 4 / Stage IIIB 2211004
MCT95C

Volvo Construction Equipment


Feedback mail: sb@[Link]
Language Code Group Product No. Version Date Page
GB 372 SSL 20 3 2013-05-24 2/2

Required parts*
* for the old interface listed below will still work.

Designation Qty. New Part No.


Cable 1 VOE88890034
Volvo interface 1 VOE88890020 OR
VOE88890180

OR:

Fig.1 Cable, part number VOE88890034

Fig.2 Volvo interface, part number VOE88890020


OR VOE88890180

Required parts**
** With the new Interface the parts below are needed.

Designation Qty. New Part No.


Interface 1 VOE88890300
Cable (from lap 1 VOE88890305
top to interface
tool (DLA)) see
Fig. 3, Item B
Cable (from 1 VOE88890302
interface tool to
SSL)

Fig.3

You might also like