Scribd
Upload
21 views1 page

Virgin Ptfe: (Polytetrafluoroethylene)

Virgin PTFE is a specific type of polytetrafluoroethylene with defined physical properties. It has a specific gravity between 2.130-2.180 g/cm3, tensile strength over 20 MPa, and elongation over 200%. It also has a Shore D hardness over 54, ball hardness over 23 MPa, and compression strength at 1% deformation over 70 Kg/cm2. Virgin PTFE is resistant to temperatures up to 260°C and certain chemicals, insoluble in solvents up to 300°C, and approved by the FDA for food contact.

Uploaded by

visvisvisvis
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
21 views1 page

Virgin Ptfe: (Polytetrafluoroethylene)

Virgin PTFE is a specific type of polytetrafluoroethylene with defined physical properties. It has a specific gravity between 2.130-2.180 g/cm3, tensile strength over 20 MPa, and elongation over 200%. It also has a Shore D hardness over 54, ball hardness over 23 MPa, and compression strength at 1% deformation over 70 Kg/cm2. Virgin PTFE is resistant to temperatures up to 260°C and certain chemicals, insoluble in solvents up to 300°C, and approved by the FDA for food contact.

Uploaded by

visvisvisvis
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

VIRGIN PTFE

(polytetrafluoroethylene)

Specific gravity ISO 13000-2 g/cm 3 2,130 2,180


Tensile strength ISO 13000-2 MPa 20
Elongation ISO 13000-2 % 200

a
Hardness ISO 13000-2 Shore D 54

sp
Ball Hardness ISO 13000-2 MPa 23
Compression strength at 1% deformation Kg/cm 2 70
Deformation under load ASTM D621 % 10 13
(140 Kg/cm 2 for 24 hrs. At 23 C)
Permanent deformation ASTM D621 % 6 7,5
(after 24 hrs. Relaxation at 23 C)
Coefficient of static friction ASTM D1894 0,08 0,10
Coefficient of dynamic friction ASTM D1894 0,06 0,08
Thermal conductivity ASTM C 177 W / m.K 0,24
Dielectric constant () ASTM D150 / 2,1
at 60 Hz to 2GHz
Dielectric Strength ASTM D149 KV/mm 20 70
Volume resistivity ASTM D257 Ohm.cm 10 18
Flamability UL 94 VE-0
Water absorption ASTM D570 % 0,01

Service Temperature
Excellent resistance to continuous service temperatures up to 260 C and, for limited periods, even to higher
temperatures; the low temperature resistance of the product allows satisfactory performance at as low 200 C.
Chemical resistance
PTFE possesses a high inertness towards nearly all known chemicals. It is only attacked by elemental alkali metals,
chlorine trifluoride and elemental fluorine at high temperature and pressures.
Solvents resistance:
PTFE is insoluble in all solvents up to temperatures as high as 300 C (572 F). Certain highly fluori nated oils only
swell and dissolve PTFE at temperatures close to the crystalline melting point.
FDA Approved
(Code of Federal regulation 21 CFR Ch.1, revised as of April 1, 1999 Edition); sections 175.105 - 175.300 - 176.170 -
176.180 - 177.1520 - 177.1550 - 177.2600 - 178.3570. "Perfluorocarbon Resins" of the Food and Drug
Administration/USA.P.

Date: 10/2009

You might also like