Scribd
Upload
33 views

Flexure Reinf.

This document contains summaries of structural designs for a wall, beam, deflection calculation, shear calculation, and one-way slab. Key details summarized include: 1) A wall design with a moment of 15.768 k-ft and reinforcement of 0.48 in2/ft. 2) A beam with a load of 34.5 k/ft, span of 5 ft, moment resistance of 107.81 k-ft, and reinforcement of 1.74 in2. 3) A one-way slab design with a span of 41.5 ft, depth of 14.5 in, demands of 202 psf for dead load and 722 plf for uniform load, and reinforcement requirements.

Uploaded by

Claudio Coletta
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
33 views

Flexure Reinf.

This document contains summaries of structural designs for a wall, beam, deflection calculation, shear calculation, and one-way slab. Key details summarized include: 1) A wall design with a moment of 15.768 k-ft and reinforcement of 0.48 in2/ft. 2) A beam with a load of 34.5 k/ft, span of 5 ft, moment resistance of 107.81 k-ft, and reinforcement of 1.74 in2. 3) A one-way slab design with a span of 41.5 ft, depth of 14.5 in, demands of 202 psf for dead load and 722 plf for uniform load, and reinforcement requirements.

Uploaded by

Claudio Coletta
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 6

WALL USE J=0.

95
Moment k-ft d in As in2/ft B
15.768 7.625 0.48 D

BEAM

d Load (k/ft) Span (ft) Mu (k-ft) As+ (in2) Vu (k)


14.5 34.5 5 107.81 1.74 86.25

DEFL.

b h I (in4) w (k/ft) L (ft)


42 12 6048 1.9 9.5

Shear

b d phi Vc max phi Vn s


54 54.5 312 1249 6
104

At rest 1.82 U1 K/FT


active 1.15 U2 K/FT
seismic 1.15
hydro 0
surcharge 0.6
Traffic 0

CHECK TENSION CONTROLLED

As 3.16
fy 60
fc 5
b 30
d 30.5
a 1.4870588
c 1.8588235
Es 0.0462247 OK
Mn 423

ONE WAY SLAB DESIGN


INPUT
CONC. DENSITY 150 PCF
T 16 IN
SDL 2 PSF
LL 300 PSF
SPAN 41.5 FT
d 14.5
f'c 5000 psi
DEMANDS CAPACITY
DL 202 PSF Vc
U 722 PLF
Vu 14.99 KIPS As+
Mu 155.52 K-FT
12 0.432 V MIN
24 0.72 H MIN

V@d (k)
44.56

As- (in2) rho Short Term (in) Creep Final (in)


1.55 0.0031 0.02 1.73 0.03

Av phi Vs phi Vn
1.86 760 1072

L 16
D 12.5
3.87 Mu+ K/FT 126.40 As+
3.95 V 31.60 V@d

y (ft) As(V) min As (H) min Vertical Reinforcement


2 0.432 0.72 2 layers #5@12"
3 0.648 1.08 2 layers #6@12"
4 0.864 1.44 2 layers #6@12"
5 1.08 1.8 3 layers #6@12"
6 1.296 2.16 3 layers #6@12"
18

2.5089
L/360 L/480
0.32 0.2375

2.37
27.49

Horizontal Reinforcement
2 layers #6@12"
3 layers #6@12"
4 layers #6@12"
5 layers #6@12"
5 layers #6@12"

You might also like