Scribd
Upload
1K views

SimpleMachinesQuiz PDF

This document contains a 29 question quiz about simple machines. It includes multiple choice and short answer questions testing knowledge of the different types of simple machines like levers, pulleys, wheels and axles, inclined planes and screws. Diagrams of various simple machines are provided with some questions referring to labeled parts or mechanical scenarios. The questions assess identifying simple machines, their basic parts and properties, as well as calculating mechanical advantage in different lever and pulley systems.

Uploaded by

Anonymous AFFiZn
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
1K views

SimpleMachinesQuiz PDF

This document contains a 29 question quiz about simple machines. It includes multiple choice and short answer questions testing knowledge of the different types of simple machines like levers, pulleys, wheels and axles, inclined planes and screws. Diagrams of various simple machines are provided with some questions referring to labeled parts or mechanical scenarios. The questions assess identifying simple machines, their basic parts and properties, as well as calculating mechanical advantage in different lever and pulley systems.

Uploaded by

Anonymous AFFiZn
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 22

Simple Machines Quiz

Part 1. Write the name of the simple machine that is described questions
1-4 below.

Word Bank:

Wheel & Axle | Screw | Pulley | Inclined Plane | Lever

1. These two parts act as one simple machine. They roll


and are found on cars, bikes and wheelbarrows.

1.
2. This simple machine can be used to lift a weight. It has
a fulcrum, or pivot point, which can be located in the
center, near the end or at the end.
2.
3. Examples of this simple machine are used to hold
things together. It is made up of an inclined plane
wrapped around a cylinder.
3.
4. A heavy object could be rolled up this simple machine,
instead of lifting it straight up. Using this simple machine
can save effort, although the object must usually cover
more distance if this simple machine is used. 4.

______5. This is necessary to get something moving.


A. resistance
B. force
C. wedge
D. screw

______6. A rod attached to the center of a wheel is called:


A. a magnet
B. a wedge
C. a top
D. an axle

______7. What should you do to reduce the amount of effort needed to lift
something using a first class lever?
A. move the fulcrum to the middle of the lever
B. move the fulcrum closer to the load
C. move the fulcrum closer to the effort
Title I ESO Simple Machines Quiz
______8. The efficiency of a simple machine is ____________________________.
A. is always less than 100%
B. is equal to 100%
C. is always 50%
D. is always more than 100%.

______9. If the mechanical advantage of a simple machine is 4, then the


A. output force is 4 times the effort
B. effort is 4 times the output force
C. efficiency is 4%
D. the work output is 4 times the input

Use Figure 1 to answer questions 10-11.

Figure 1.

10 Which of the following statements is true for Figure 1.


A. B is the fulcrum, C- is the resistance, A is the effort
B. B is the resistance, C is the fulcrum, A is the effort
C. B is the fulcrum, A is the effort, C- is the resistance
D. B is the resistance, A is the fulcrum, C is the effort

11. In Figure 1, if the distance from a to b is 20 cm, and the distance from a to c
is 80 cm, then the mechanical advantage of the system is
A. 20
B. 80
C. 4
D.
Station 1
Station 1
Questions using Station 3 Diagram
12. What class of lever is this?

13. In order to balance these 2 objects how


should you change the length of the board on
the side of the elephant?
Station 2
Station 2
Questions using Station 4 Diagram
14. Is the simple machine pictured increasing,
decreasing or not changing the mechanical
advantage of the situation?

15. What kind of simple machine is this?


Station 3
Station 3
Questions using Station 3 Diagram

16. What kind of simple machine is this?

17. This machine works best if the length of the


effort arm is
A. Short B. Long C. The length doesnt
matter
Station 4
Station 4
Questions using Station 8 Diagram
18. If you are using a Screwdriver to twist out a
screw, you are actually using 2 simple machines.
What are they?

19. If you are using a screwdriver to pry open a


paint can, you are using it as what type of simple
machine?
Station 5
Station 5
Questions using Station 5 Diagram

20. How long is the effort arm of this simple


machine?

21. If the effort applied to lift the book is applied


closer to the pencil, will it get harder or
easier to lift the book?
Station 6
Station 6
Questions using Station 13 Diagram

22. What simple machine is pictured?

23. If the weight being lifted weighs 100 lbs,


how much force must be used to lift it with the
use of this simple machine?
A. 10 lbs B. 50 lbs C. 100 lbs D. 200 lbs
Station 7
Station 7
Questions using Station 7 Diagram
24. What kind of machine is pictured?

25. The nut represents what part of the simple


machine?
A. Resistance Force
B. Effort Force
Station 8
A B

D E
C
Station 8
Questions using Station 8 Diagram

26. Which of the pulley systems has the


greatest mechanical advantage?

27. Of the pulleys on the top row, A and


B diagrams, which one doesnt effect
the amount of force required to lift the
object?
Station 9
Station 9
Questions using Station 12 Diagram

28. What 2 simple machines make up the top


item pictured?

29. What makes the knob at the top easier to


use than the knob at the bottom right?
NAME: _______________________________
2014 ESO Simple Machines Test Answer Sheet
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
NAME: _______________________________
2014 ESO Simple Machines Test Answer KEY
1 Wheel & Axel
2 Lever
3 Screw
4 Inclined Plane
5 B Force
6 D an Axel
7 B Move the fulcrum closer to the load
8 A is always less than 100%
9 A output force is 4 times the effort
10 D B=resistance; A=fulcrum; C=effort
11 C4
12 Class One
13 Shorten it or move elephant much closer to middle
14 Not changing
15 pulley
16 Lever
17 B. Long
18 Inclined plane and wheel and axle
19 lever
20 5 or 6 units, they may say inches
21 harder
22 pulley
23 B. 50 lbs
24 lever
25 A. Resistance force
26 E.
27 A.
28 Lever and wheel and axle
29 The lever part makes it easier to turn

You might also like