Scribd
Upload
283 views

Test Engg Syllabus

This document outlines the detailed syllabus for a test engineering course. The course covers various topics in test engineering over 5 units spanning 17-16 hours each. Topics include fundamentals of testing methods, automated testing techniques, VI curve testing, boundary scan testing, and automatic test program generation. Hands-on learning is emphasized with required equipment for experiments covering areas like short circuit detection, functional testing, signature analysis, and boundary scan testing. 3 reference books are also listed.

Uploaded by

raghavendran_beeee
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
283 views

Test Engg Syllabus

This document outlines the detailed syllabus for a test engineering course. The course covers various topics in test engineering over 5 units spanning 17-16 hours each. Topics include fundamentals of testing methods, automated testing techniques, VI curve testing, boundary scan testing, and automatic test program generation. Hands-on learning is emphasized with required equipment for experiments covering areas like short circuit detection, functional testing, signature analysis, and boundary scan testing. 3 reference books are also listed.

Uploaded by

raghavendran_beeee
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

34062 - TEST ENGINEERING

DETAILED SYLLABUS
UNIT NAME OF THE TOPIC HOURS
1
INTRODUCTION TO TEST ENGINEERING.
Need and Importance of Test Engineering Principles of
Fundamental Testing Methods Basic Principles of Memory
Testing PCB Track Short Testing Methods Concepts of
Trouble Shooting PCBs - Manual and Automated PCB Trouble
Shooting Techniques.
17
2
AUTOMATED TESTING METHODS AND TECHNOLOGY
Introduction to Automated Test Techniques Fundamental of
Digital Logic Families - Concepts of Back-Driving / Node Forcing
Technique and its International Defense Standard - Concepts of
Digital Guarding - Auto Compensation - Clock Termination
Functional Test Methods - Functional Testing of Digital, Analog
and Mixed Integrated Circuit Different types of Memory Module
Functional Test.
17
3
V-I(Signature) TESTING METHODS AND TECHNOLOGY
Fundamentals of Electrical Characteristics - Effects of Curve
Trace, Characteristics of Passive and Active Components -
Understanding Composite VI-Curve and it deviations
Component Identification of Ageing Effects with VI Curve Trace,
Input and Output Characteristics of Digital Integrated Circuits -
Good Versus Suspect interpretation Comparison.
15
4
BOUNDARY SCAN TESTING METHODS AND TECHNOLOGY
Introduction to Boundary Scan Need of Boundary Scan Test
Technique - Principle of Boundary Scan Test - Boundary Scan
Architecture - Application of Boundary Scan Test- Boundary Scan
Standards - Boundary Scan Description Language (BSDL)
Interconnect test Serial Vector Format (SVF) Test - Basic of
JTAG Port - Digital Integrated Circuit Test using Boundary Scan
Techniques.
15
5
ATE Test Program generation And Semiconductor testing
ATE in PCB Test Test Fixtures - Basics of Automatic Test
Program Generation - Standard Test Data Format STDF Basic
of Digital Simulator - Introduction to Semiconductor Test, Use of
Load Boards.
16
Curriculum Development Centre, DOTE. Page 156
REFERENCE BOOKS:
1. Test Engineering for Electronic Hardware S R Sabapathi, Qmax Test
Equipments P Ltd., 2011.
2. Practical Electronic Fault Finding and Trouble shooting by Robin Pain
Newnes, Reed Educational and professional publishing Ltd., 1996
3. The Fundamentals of Digital Se
EQUIPMENTS REQUIRED
Sl.No Name of the Equipments
1 PCB SHORTS LOCATOR TRAINER
2 V-I CHARACTERISTICS TRAINER SYSTEM
3 FUNCTIONAL TESTING TRAINER SYSTEM
4 IN-CIRCUIT MEASUREMENT TRAINER SYSTEM
5 BOUNDARY SCAN TEST TRAINER SYSTEM
6 DIGITAL and ANALOG SIMULATOR

34066 - TEST ENGINEERING PRACTICAL


List of experiments
1. Locate a Short in a circuit Board using Short Locator.
2.Test and verify the combinational logic circuits NAND, NOR, Half-Adder, Half-Subtractors,
Multiplexers, De-multiplexer, Decoder & Encoder using functional test method.
3.Test and verify the Sequential Logic Circuits D-FF, RS-FF, Latch, Counter, Shift
Register using functional test method.
4. Test and verify the Memory Devices SDRAM/DRAM Chip . using functional test method.
5. a. Test and verify the digital circuits in a circuit using auto compensation technique.
b.Test and verify the open emitter circuit using pull down resistor.
c. .Test and verify the open collector circuit using pull up resistor.
6. Test the functionality of operational amplifier in Inverting , Non-inverting and voltage
follower mode.
7. Test the VI characteristics of R,L,C using signature method.
8.Test the VI characteristics of electronic components Diode, Zener Diode, NPN/PNP
Transistor using signature method .
9. Test the VI characteristics of RC Filter, Low Pass Filter , Band Pass Filter using
signature method.
10.Test the VI characteristics of electronic components MOSFET and Transistor using
Trigger pulse and signature method.
11.Test the VI characteristics of electronic components SCR and Opto coupler using
Trigger pulse and signature method.
12. Test RLC circuit using in-circuit measurement method.
13..Test the Boundary Scan IC using JTAG port and non boundary scan IC using
boundary scan IC.
14.Detect and list down the stuck to VCC and stuck to Gnd pins in a boundary scan IC.
15.Develop a device model for NAND and NOR using device library and create a test pattern for
testing.

You might also like