Scribd
Upload
41 views

Create A Bootable USB Flash Drive

To create a bootable USB flash drive: 1. Insert a USB flash drive and open Command Prompt as administrator. 2. Use the diskpart command to determine the USB drive number, clean the drive, create and format a new primary partition. 3. Activate the partition and save a custom OS image file to the USB flash drive root to make it bootable.

Uploaded by

Rosen LP
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
41 views

Create A Bootable USB Flash Drive

To create a bootable USB flash drive: 1. Insert a USB flash drive and open Command Prompt as administrator. 2. Use the diskpart command to determine the USB drive number, clean the drive, create and format a new primary partition. 3. Activate the partition and save a custom OS image file to the USB flash drive root to make it bootable.

Uploaded by

Rosen LP
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

How to create a Bootable USB Flash Drive

1. Insert a USB flash drive into a running computer.

2. Open a Command Prompt window as an administrator.

3. Type diskpart.

4. type list disk, and then press ENTER. The list disk command displays all the disks on the
computer. Note the drive number or drive letter of the USB flash drive.

5. type select disk <X>, where X is the drive number of the USB flash drive, and then press
ENTER.

6. Type clean, and the press ENTER. This command deletes all data from the USB flash drive.

7. To create a new primary partition on the USB flash drive, type create part primary, and then
press ENTER.

8. To select the partition that you just created, type select part 1, and then press ENTER.

9. type format fs=ntfs quick to format the partition, and then press ENTER.

10. Type active, and hit ENTER.

11. Type exit, and then hit ENTER.

12. save the custom image of your OS in your USB flash drive.

Create a Bootable USB Flash Drive


1. Insert a USB flash drive into a running computer.

2. Open a Command Prompt window as an administrator.

3. Type diskpart.

4. In the new command line window that opens, to determine the USB flash drive number or drive
letter, at the command prompt, type list disk, and then click ENTER. The list disk command
displays all the disks on the computer. Note the drive number or drive letter of the USB flash
drive.

5. At the command prompt, type select disk <X>, where X is the drive number or drive letter of
the USB flash drive, and then click ENTER.

6. Type clean, and the click ENTER. This command deletes all data from the USB flash drive.

7. To create a new primary partition on the USB flash drive, type create part pri, and then click
ENTER.

8. To select the partition that you just created, type select part 1, and then click ENTER.

9. To format the partition, type format fs=ntfs quick, and then click ENTER.

10. Type active, and then click ENTER.

11. Type exit, and then click ENTER.

12. When you finish preparing your custom image, save it to the root of the USB flash drive.

You might also like