Scribd
Upload
69 views

Steady Flow Water Surface Profile Computation Using HEC-RAS (Basic)

This document outlines a training course on using the HEC-RAS software to perform river hydraulic modeling and water surface profile calculations. Over the 5-day course, participants will learn about open channel flow concepts, HEC-RAS inputs like geometric data and boundary conditions, how to run simulations of water surface profiles, bridges, culverts, and floodways. The agenda includes lectures on these topics in the mornings followed by workshops where participants get hands-on experience entering data and analyzing outputs in HEC-RAS.

Uploaded by

Opata Opata
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
69 views

Steady Flow Water Surface Profile Computation Using HEC-RAS (Basic)

This document outlines a training course on using the HEC-RAS software to perform river hydraulic modeling and water surface profile calculations. Over the 5-day course, participants will learn about open channel flow concepts, HEC-RAS inputs like geometric data and boundary conditions, how to run simulations of water surface profiles, bridges, culverts, and floodways. The agenda includes lectures on these topics in the mornings followed by workshops where participants get hands-on experience entering data and analyzing outputs in HEC-RAS.

Uploaded by

Opata Opata
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

Steady Flow Water Surface Profile Computation

Using HEC-RAS (Basic)


Objectives
The objective of the course is to enable the participants to perform water surface profile
computations using computer program HEC-RAS in a sound and effective manner.
Topics will include concepts of open channel flow, data requirements, basic input requirements,
output analysis, application of bridge and culvert routines, and floodway determination. Participants
will
have an opportunity to prepare input and analyze output during workshops.
2
Monday: Modeling River Hydraulics with HEC-RAS
8:00 9:00 a.m. INTRODUCTION
9:00 10:00 a.m. 1.1 Lecture: WATER SURFACE PROFILE CALCULATION
Classifications of open channel flow; velocity distribution in a channel; energy
principles; cross section subdivision for conveyance calculations; friction loss
equations; contraction and expansion losses; computational procedure; critical
depth determination; and applications of the momentum equation.
10:00 10:15 a.m. Break
10:15 11:00 a.m. 1.2 Lecture: RESISTANCE TO FLOW
Discussions about Mannings equation; uniform flow equations; methods for
computing n values: tables, pictures, and equations; examples of calibrated n
values for various streams.
11:00 - 12:00 p.m. 1.3 Lecture: GEOMETRIC DATA REQUIREMENTS FOR WATER
SURFACE PROFILE CALCULATIONS
Study limit determination; defining the river system schematic; cross section
geometry and locations; optional cross section properties: ineffective flow
areas, levees, and blocked obstructions; defining the reach lengths between
sections; energy loss coefficients; stream junction data.
12:00 - 1:00 p.m. LUNCH
1:00 - 2:00 p.m. 1.4 Lecture STEADY FLOW DATA REQUIREMENTS
Discussions about flow regime; boundary conditions; discharge information.
2:00 - 2:15 p.m. Break
2:15 - 3:15 p.m. 1.5 Lecture: STEPS IN DEVELOPING A HYDRAULIC MODEL WITH
HEC-RAS
Starting HEC-RAS; steps in developing a hydraulic model: starting a new
project, entering geometric data, entering steady flow data, performing the
computations, viewing and printing results; getting and using help.
3:15 - 5:00 p.m. 1.6 Workshop: CALCULATION OF WATER SURFACE PROFILES
Students will learn to enter data into HEC-RAS; perform the hydraulic
computations; and view results.
3
Tuesday: HEC-RAS Bridge Analysis
8:00 - 8:30 a.m. REVIEW WORKSHOP 1.6
8:30 - 9:15 a.m. 2.1 Lecture: VIEWING RESULTS
Viewing results; cross section plots; profile plot; X-Y-Z plot; summary tables;
errors, warnings, and notes.
9:15 - 9:30 a.m. Break
9:30 -10:45 a.m. 2.2 Lecture: HYDRAULICS OF BRIDGE WATERWAYS
Nature of flow through bridges; components of bridge losses; cross-section
locations; defining ineffective flow areas; contraction and expansion losses.
10:45 11:00 a.m. Break
11:00 12:00 p.m. 2.3 Lecture: SELECTING A BRIDGE MODELING APPROACH
Available approaches to bridge loss computations within HEC-RAS; Selecting
the appropriate bridge modeling approach for various situations of low flow
bridge hydraulics; selecting the appropriate bridge modeling approach for
various situations under high flow bridge hydraulics.
12:00 1:00 p.m. LUNCH
1:00 2:00 p.m. 2.4 Lecture APPLICATION OF HEC-RAS TO BRIDGE HYDRAULICS
Entering and editing bridge data; defining a bridge modeling approach; bridge

modeling options; example bridge application; pertinent bridge output.


2:00 - 2:15 p.m. Break
2:15 - 5:00 p.m. 2.5 Workshop: BRIDGE COMPUTATIONS
Students will learn to enter and edit bridge data; perform bridge hydraulic
computations; and review pertinent results.
4
Wednesday: HEC-RAS Culvert and Multiple Opening Analysis
8:00 - 9:00 a.m. REVIEW: Workshop 2.5
9:00 - 9:15 a.m. Break
9:15 -10:15 a.m. 3.1 Lecture: OVERVIEW OF CULVERT HYDRAULICS
Definition of terms; input requirements: cross section locations, ineffective flow
areas, expansion and contraction coefficients; inlet control; outlet control;
solution logic.
10:15 - 10:30 a.m. Break
10:30 -11:15 a.m. 3.2 Lecture: APPLICATION OF HEC-RAS TO CULVERT HYDRAULICS
Entering and editing culvert data; culvert modeling options; example culvert
applications.
11:15 - 12:00 p.m. 3.3 Workshop CULVERT ANALYSIS
Students will learn how to enter and edit culvert data, perform culvert hydraulic
computations; and review pertinent output.
12:00 -1:00 p.m. Lunch
1:00 - 2:00 p.m. 3.3 Workshop CULVERT WORKSHOP CONTINUED
2:00 - 3:00 p.m. 3.4 Lecture MULTIPLE BRIDGE AND CULVERT OPENINGS
General modeling guidelines; multiple opening approach; divided flow
approach; entering multiple opening data; multiple opening output.
3:00 - 3:15 p.m. Break
3:15 - 5:00 p.m. 3.5 Workshop MULTIPLE OPENING ANALYSIS
Students will learn how to define multiple openings; enter multiple opening data;
perform the computations; and view the pertinent results.
5
Thursday: HEC-RAS Optional Capabilities and Floodway Determination
8:00 - 9:00 a.m. REVIEW: Workshop 3.3 and 3.5
9:00 - 9:15 a.m. Break
9:15 - 10:15 a.m. 4.1 Lecture: OVERVIEW OF OPTIONAL CAPABILITIES
Multiple plan analysis; cross section interpolation; mixed flow regime
calculations; flow distribution calculations; Inline Weirs and Gated Spillways;
and Bridge Scour Analysis.
10:15 11:30 a.m. 4.2 Workshop: MIXED FLOW REGIME CALCULATIONS
Students will learn how to run the model in a mixed flow regime mode, and
review pertinent results.
11:30 12:00 p.m. REVIEW: Workshop 4.2
12:00 -1:00 p.m. Lunch
1:00 - 2:00 p.m. 4.3 Lecture IMPORTING HEC-2 DATA
Discussions will include how to import HEC-2 data into HEC-RAS; differences
between the programs as it pertains to the imported data; major areas where
data modifications will be necessary.
2:00 - 2:15 p.m. Break
2:15 - 3:15 p.m. 4.4 Lecture: FLOODPLAIN AND FLOODWAY DETERMINATION
Floodway definitions; general guidelines; computer procedures; program input
requirements for floodway calculations; available output.
3:15 4:30 p.m. 4.5 Workshop: FLOODWAY DETERMINATION
Students will learn how to enter and edit encroachment data and perform a
floodway analysis.
4:30 - 5:00 p.m. REVIEW: Workshops 4.5
6
Friday: HEC-RAS Trouble Shooting and Output Analysis
8:00 8:45 a.m. 5.1 Lecture: TROUBLE SHOOTING WITH HEC-RAS
This lecture will provide students with information on how to interpret HEC-RAS
output messages (errors, warnings, and notes); diagnose common data input
mistakes; and how to use the HEC-RAS Log File to understand more about the

computations and possible problems.


8:45 9:00 a.m. Break
9:00 -10:30 a.m. 5.2 Workshop OUTPUT ANALYSIS
This workshop will teach students how to analyze the HEC-RAS output in order
to detect common hydraulic modeling problems.
10:30 -11:00 a.m. POST-COURSE ASSESMENT
11:00 11:30 a.m. ORAL CRITIQUE AND COURSE COMPLETION

You might also like