IPv4 Address Subnetting Part 2
IPv4 Address Subnetting Part 2
Name
The network topology from Part 1 has expanded to accommodate the addition of router R3 and its
accompanying network. Use the 192.168.10.0/24 network address to design a new addressing
scheme to support the additional network requirement.
Step 1: Determine the number of subnets in Part 2 Problem C. Fill in the blanks.
a. How many subnets are there? ____4_______ (If you answered 4, then you are correct.)
b. How many bits should you borrow to create the required number of subnets? 22 =4
How many usable host addresses per subnet are in this addressing scheme? 26-2=64-2=62
c.
Subnet Address
Broadcast
Address
192.168.10.0
192.168.10.1
192.168.10.62
192.168.10.63
192.168.10.64
192.168.10.65
192.168.10.126
192.168.10.127
192.168.10.128
192.168.10.129
192.168.10.190
192.168.10.191
192.168.10.192
192.168.10.193
192.168.10.254
192.168.10.255
4
5
6
7
Part 2:Problem D
Part 2: Problem D: The topology has changed again with a new LAN added to R2 and a redundant
link between R1 and R3. Use the 192.168.10.0/24 network address to provide an IP address scheme
that will accommodate these additional devices. For this topology, assign a subnet to each network.
How many subnets are there? _____6______ (If you answered 6, then you are correct.)
b.
How many bits should you borrow to create the required number of subnets? 23 =8
c.
How many usable host addresses per subnet are in this addressing scheme? 25 -2=32-2=30
d.
e.
f.
Subnet Address
Broadcast
Address
192.168.10.0
192.168.10.1
192.168.10.30
192.168.10.31
192.168.10.32
192.168.10.33
192.168.10.62
192.168.10.63
192.168.10.64
192.168.10.65
192.168.10.94
192.168.10.95
192.168.10.96
192.168.10.97
192.168.10.126
192.168.10.127
192.168.10.128
192.168.10.129
192.168.10.158
192.168.10.159
192.168.10.160
192.168.10.161
192.168.10.190
192.168.10.191
192.168.10.192
192.168.10.193
192.168.10.222
192.168.10.223
192.168.10.224
192.168.10.225
192.168.10.254
192.168.10.255
8
9
10